DOGCARE TCO1-PRO-R Dog Training Collar User Manual
- June 15, 2024
- Dogcare
Table of Contents
DOGCARE TCO1-PRO-R Dog Training Collar
Specifications
| Model | TC01 PRO |
|---|
Important Safety Instructions
Read all instructions before using the product. To reduce the risk of injury, charge only rechargeable DOGCARE batteries. Other types of batteries may burst, causing personal injury and damage. Do not disassemble the remote or receiver collar; this could result in malfunction or accidental injury.
Quick Start
- Charge the remote and receiver collar for 2 hours.
- Connect the receiver collar to the remote.
- Adjust the collar strap to fit the dog’s neck and trim off the excess.
- Choose training mode: Beep, Vibration, or Static.
- Use the training functions appropriately.
COLLAR STATIC STIMULATION WORK GUIDE
Use the static stimulation function with caution and start from the lowest
level of stimulation.
- Press the 1/2 button to choose the receiver collar.
- Press the Y button to send a static stimulation.
- Adjust the static level using the + / – button.
LED Display
The LED display on the remote control provides information about the static level, battery status, and the receiver collar connected.
Pairing
To pair the remote with the receiver collar, press and hold the Y button for 5 seconds until the green LED light flashes.
Training Tips
Avoid using the static stimulation function too frequently. Use vibration
or beep mode as a warning before static stimulation if necessary.
Product Specifications
| Input | 5V |
|---|---|
| Battery | Lithium Polymer Battery |
| Charging Time | 2-3 Hours |
| Standby Time | ~15 Days |
FCC Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0 cm between the radiator and your body.
Additional Information
Please refer to the full manual for additional instructions and safety information before using this product.
Note: The above HTML transcription is based on the text visible in the provided image. Certain sections may be incomplete or require further details that might not be fully visible in the image. Additional information, such as full instructions, warnings, and specifications, should be referred to in the actual product manual or official documentation.
FAQS
How do I charge the device?
Charge the remote and receiver collar for 2 hours before first use.
What is the proper way to fit the collar?
Adjust the collar strap to fit the dog's neck comfortably and trim off any excess strap.
Can I use regular batteries?
No, only use rechargeable DOGCARE batteries to avoid damage and personal injury.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cmbetween the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>