axis 7 Inch Monitor & Camera Kit JS7000K Instruction Manual

: June 6, 2024
: AXIS

Table of Contents

Axis JS7000K 7 Inch Monitor & Camera Kit Instruction Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Axis JS7000K 7 Inch Monitor & Camera Kit Instruction Manual

Axis JS7000K

SPECIFICATIONS

JS7000 MONITOR

TFT Panel: New Grade A LCD
LCD Size: 178mm (7-Inch) Diagonal
Display Format: 16:9
Resolution: 800 x 480
Brightness: < 500 CD/M2
Viewing Angles: 70° Left/Right/Up/Down
Video System: Auto PAL/NTSC Select
Video Connect: 2 x 4-Pin (Female)
Reverse Trigger: Camera 2 Only
Monitor View: Normal/Mirror Image Select
Buttons: Illuminated
Guidelines: Selectable On/Off (Camera 2 Only)
Audio: On Board Speaker
Menu: OSD
Main Menu: Brightness/Contrast/Colour/Volume/ Guidelines (On/Off)/Reset/Language
Operating Temp: -20°C to +70°C
Power Input: 10-32V DC (Negative Ground)
Dimensions: 180W x 122H x 28D mm (excluding bracket)
Finish: Matt Black Rubber, Matt Metal
Included: U-Shape Mount, Remote Control, Power Cable Assembly, Sunshade

CAMERA

Image Sensor: 1/3” Sony CCD
Auto Lens: f2.9mm
Electronic Shutter: Auto
Diagonal Viewing Angle: 120°
Horizontal Viewing Angle: 90°
Signal System: PAL
Resolution: 700 TV Lines
Sync System: Internal
Orientation: Mirror Image
Night Vision: Yes, 18 LED
Illumination: 0 Lux with IR on
Ingress Protection: IP67
Operating Temperature: -20°C ~ +70°C
Dimensions: 70W x 45H x 60D mm (Excl Bracket)
Connection: Terminated 4-Pin Male
Power Supply: 12V DC (From Monitor)
Included: 15m 4 Pin (Male) to 4 Pin (Female) Extension Cable, Mounting Bracket, Sunvisor

Optional: Glass Mount Bracket (BKT101)

REMOTE CONTROL

SPECIFICATIONS

MONITOR

Display: Colour TFT-LCD
Size: 7” (Diagonal)
Aspect Ratio: 16:9 / 4:3
Resolution: 800 x 480 x RGB
System: PAL/NTSC/AUTO AV
Channels: 2 (4 Pin Aviation)
Power: 9-32Volts DC
Connector Plug: Male Screw Plug
Mounting Bracket: Metal U type
Buttons: Illuminated
Operating Temp: -20℃ to +70℃
Trigger Delay: Yes
Remote Control: Yes (IR)
OSD Menu: Yes – Audio: Yes

Camera

Sensor: 1/3 SONY CCD
Sensitivity: 0 Lux with IR
Electronic Shutter: Auto
Lens: f 2.9mm
AGC: Auto
Power: 12 volt DC
Operating Temp: -20°C to +70°C
Protection: IP67
Plug: 4 Pin Aviation
Audio: No

AV CABLE

Length: 15m
Connector Type: 4 Pin

Specifications may be subject to change without notice.

MONITOR & CAMERA SET UP

Place the U bracket in the position desired with the monitor installed and check for obstructions. Do not obscure driver’s view. Do not mount near airbags. Remove monitor and fix U bracket.
Place the monitor back in the U bracket and fix using the provided screws.
Adjust the angle as required by up to 30 degrees each way.

CAMERA

. Install the camera in a position that offers the best view. Test the view before fixing and check for correct orientation. Protect from damage and excess water spray.
Seal all connectors from water with tape. Allow for water drip loops in cable.
Fix cable securely.

OPTIONAL ACCESSORIES

Matching Second Camera

Centre License Plate Camera

Side Cameras, ideal for blind spots

Front Facing camera

Trailer Connection AV/Power Cables

INCLUDING ACCESSORIES

Remote control 1x
User manual 1x
Power cable
Sun shade 1x
Bracket Accessories 1x

National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148Australia
Telephone: (02) 8841 9000 Fax: (02) 9636 1204
email: services@audioxtra.com.au