EUROM 334579 Heat and Beat Patio Heater Instructions

: June 6, 2024
: EUROM

Table of Contents

EUROM 334579 Heat and Beat Patio Heater
Turning on the speakers and establishing the Bluetooth connection
Various settings
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUROM 334579 Heat and Beat Patio Heater

Open the APP Store or Google Play on your device
Download the Eurom Heating APP:
Bluetooth should be switched on before using this APP
Then open the ‘Eurom heating’ APP on your device
For connecting the heater with the APP, please follow the steps below:
Select the button in the below left corner of the home screen (Fig. 1)
To switch on the heater, please select the bar (Fig. 2)
For first time use of the heater, a password will be asked. The password is automatically set to: 12345678 (Fig. 3)
If the password is not accepted than press and hold the reset button on the side of the unit for 10 seconds this is for the hanging Heat and Beat, for the Heat Beat Tower following below instruction: press the 3 buttons (3 seconds) until the touch screen is flickering. Now You can fill in the password again by starting the APP.
The heater is connected and ready for use
To set the heat capacity, please select the small sun-icon below
Thereafter, below screen of Fig. 4 will be shown
Select the Eurom Heater and using the vertically bar on the left of the screen you are able to set the variable warmth

Turning on the speakers and establishing the Bluetooth connection

Use the button on the remote control to turn on the speakers and Bluetooth connection for the Heat and Beat (hold down for 4 seconds). Before using for the first time, select the volume function of the Heat and Beat (Eurom Beat) on your tablet or smartphone via Settings > Bluetooth. Now, when you use your smartphone or tablet to play music (or news, a film, your phone etc) the sound will come from the Heat and Beat speakers.

using the music symbol the Bluetooth connection can beset (Pairing), the speaker can turned on and the volume can be set (fig. 5,6)
Using the clock icon below you are able to set the timer for automatically switch off the heater
Using the color icon you are able to set the LED background light (fig. 7,8).

It is possible to save preferred colors. In the smooth the LED will show 1 color, in the BEAT setting the color will change according beat.

Various settings

In the home screen, you are able to change settings by using the cog-icon in the below right corner
Password: Change Password
Tilt sensitivity: Not working
Rename: Modify/personalize the name of the heater
Indicator LED: Not working
Signal Strength: Check the Bluetooth signal strength
Device Bluetooth Control: Bluetooth control
Firmware Update: Update the app to the latest version
Show Wizard Again: Show the explanation of the menu
About: General app information
The heater can be controlled by one IOS or Android device
For control by APP, the latest IOS or Android version should be downloaded

Warning!

When you switch off the heater by only using the remote (or APP), the heater will remain on standby. Always switch off the heater by using the remote (or APP) as well as the main switch on the side of the unit and unplug it from the electrical outlet. When the APP will be out of Bluetooth reach, there will be no more connection with the heater. However, the heater will remain burning and the actual settings will be saved. Do not leave the heater unattended and always use the main switch on the side of the unit to switch off the heater.

Eurom
Kokosstraat 20 8281 JC Genemuiden The Netherlands info@eurom.nl www.eurom.nl