MICHELIN MI2171 Wireless Rotating Earbuds Instruction Manual
- June 1, 2024
- MICHELIN
Table of Contents
MICHELIN MI2171 Wireless Rotating Earbuds
MICHELIN
Wireless Rotating Earbuds
Instruction Manual
Safety instructions
Please read all safety information and operating instructions below before using the earbuds to avoid injury and damage to your device.
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Repairs or battery removal must only be undertaken by an authorised specialist using the correct tools and equipment.
- Please fully charge the product before first use.
- Do not charge the device for more than 3 hours, avoid charging overnight, covering the device whilst charging or leaving the product unattended.
- Ensure that the USB cable is removed from the device after charging is completed.
- Only use the cable supplied or certified cables to charge this product.
- Do not use excessive force when inserting or removing the cable from the charging case, to avoid damage to the socket or your device.
- Please use a Power Source Circuit (Class 1) adaptor with a maximum output of 5V 2.0A to charge this product. Using an incompatible adaptor could result in your product malfunctioning.
- Recharge the earbuds once every 3 months if they have not been in use to avoid self-discharging to dead.
- Never short circuit the unit. To avoid short circuiting, keep away from all metal objects (e.g coins, hair pins, keys ect)
- Do not modify, disassembly, open, drop, crush or puncture the product.
- Avoid exposure to high temperature and/or direct sunlight.
- Do not throw into water or fire.
- Under no circumstances should you attempt to repair or remove the battery from the unit yourself.
- This device is not intended to be used by children.
- The battery can not be subjected to during use, storage or transportation at high or low extreme temperatures and low air pressure at high altitude.
- Disposal of battery into a fire or a hot oven, or mechanically crushing or cutting the battery can result in an explosion.
- Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- Battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.
- Please do not clean this product with chemicals or powerful detergents.
- The case can become warm during charging. This is normal but please use cautiously and if it becomes too hot unplug the product and leave to cool before using again.
- Please stop using and disconnect the product if it shows signs of overheating distortion or discolouration.
Package Contents
Music Mode
- Click the right earbuds (R): Volume up
- Click the left earbuds (L): Volume down
- Double-click the left or right earbuds (L or R): Play/ Pause
- Triple tap right earbuds (R): Next song
- Triple tap left earbuds (L): Last song
Call Mode
- Double-click the left or right earbuds (L or R): Answer/ Hang up
- Long press the left or right earbuds (L or R): Reject a call
Light Indication
When earbuds are placed in the charging case
Product Operating Instructions
Power On:
- Method 1 : Rotating the charging case ring, the earbuds turn on automatically.
- Method 2 : Long touch the functional area of the earbuds for 5 seconds to turn on the earbuds
Power Off:
- Method 1 : Putting the earbuds back into the charging case and rotate the ring back to original position, the earbuds turn off automatically.
- Method 2 : Long touch the functional area of the earbuds for 5 seconds to turn off the earbuds.
Paring
- Step 1 : Rotating the charging case ring, the left and right earbuds will automatically turn on and pair with each other.
- Step 2 : Activate the wireless function on your mobile device, search and select paring name “Michelin Earbuds” from the list of available devices.
Restore settings
Turn on the earbuds, and make sure it does not connect to any wireless device,
and click the functional area 5 times, then turn off the earbuds.
Warnings
To prevent possible hearing damage, DO NOT listen at high volume levels for long periods. Warning! Earphones may present a choking hazard or cause other injury to small children due to magnetic material. This product is not intended for use by small children and should be kept away from children under 3 years of age.
- DO NOT use your earphones while driving or at any time in which the inability to hear surrounding sounds may present a danger to yourself or others.
- Earphones can leaf to ear infections if not properly cleaned. Clean your tips frequently with an antiseptic. Some individuals may also be sensitive to silicone elastomers. If rash or other skin problems develop, discontinue use. If the problem persists, consult a physician.
- DO NOT use the earphones without the silicone ear tips. Before attaching the ear tips, make sure the mesh caps are securely attached.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Specifications
- Wireless Version: 5.3
- Transmission Distance: 26-33 Feet
- Earbuds Battery capacity: 35mAh
- Playing time : About 5 hours (half volume)
- Earbuds Charging time: About 1.5 hours
- Earbuds Input: DC 5V 30mA
- Charging case Battery capacity: 300mAh
- Charging time for case: About 2 hours
- Charing case Input : DC 5V 300mA
- FCC ID: 2ALSKBTH-33
Supplied by
Brand Addition Ltd.,, Broadway House, Trafford Wharf Road, Manchester, M17
1DD, United Kingdom Brand Addition GMBH., Europastrasse 19A 45888
Gelsenkirchen, Germany Brand Addition Shanghai, Unit 903-905, T2 Building,
VIPARK, 500 Xinlong Road, Minhang District, Shanghai Brand Addition US, MO
63102 Saint Louis, USA Declaration on hazardous substances and elements
contained in electronic products
This form is compiled in accordance with SJ/T 11364.
0: It indicates that the content of the harmful substance in all homogeneous
materials of the component is below the limit specified in GB/T 26572
standard.
X: The content of harmful substances in at least one homogeneous material of
this part exceeds the limit stipulated in GB/T 26572 standard. This product
complies with EU RoHS 2.0 Directive (2011/65/EU) Warm Tip: The 5-year icon
refers to the “effective life of environmental protection” , not the product
quality assurance period. Electronic products all contain harmful substances
such as lead, mercury and cadmium. Once they are overused, harmful substances
may leak or mutate, cause pollution to the environment, or cause serious
damage to people and property. The term of “environmental protection use”
means that all electronic products will be required to use within this
effective period. We will no longer be responsible for the quality of the
products due to the safety risks that arise after the safe use period. Made in
China Model Number: MI2171
Brand Addition hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at : www.brandaddition.com Product disposal At the end of this product life it should not be disposed of with general household waste. Care should be taken to dispose of in a suitable manner in accordance with your Local Authority Regulation.
Warranty
For a period (refer to below table) after the date of original purchase of the product, our warranty will cover the product for any defects in materials or workmanship when used in accordance with this user manual. During the warranty period defective products shall be repaird or replaced.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>