Kruger Matz KM0656 Street Kids Wireless Headphones Owner’s Manual
- June 6, 2024
- Kruger Matz
Table of Contents
STREET KIDS Wireless headphones
KM0656 / KM0657
Owner’s Manual
SAFETY INSTRUCTIONS
Read the instruction manual before first use and keep it for future reference.
-
Minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume.
-
Keep the volume at a reasonable level throughout the entire time of using the headphones. To prevent damage to your hearing, do not raise the volume too high.
-
Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling).
-
Never use the headphones while driving a car, riding a motorcycle or bicycle, or operating any other vehicle, as it may cause a potential risk to your safety.
-
Stop using the headphones if you feel tinnitus, hearing discomfort, irritation or have other adverse reactions.
-
Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for a check-up/repair.
-
Do not subject the headphones to strong impact.
-
Clean this device with a soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
-
Protect this product from moisture, humidity, water, and any other
liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat. -
Never use this device if it is damaged.
-
Use only authorized accessories.
PRODUCT DESCRIPTION
- M button (turn on/off/ pairing)
- <<- button (decrease volume/previous track)
- +>> button (increase volume/next track)
- Microphone
- button (call management/play/pause)
- AUX input/output
- LED indicator
- micro USB charging port
OPERATION
Function | Operation |
---|---|
Turn on/ off | Press and hold the OM button for about 4 seconds |
Enter Bluetooth pairing mode | When the headphones are turned off, press and |
hold the OM button for about 6 seconds
Play/ pause music| Press the button
Increase/ decrease volume| Press the +» / <<- button
Go to next/ previous track| Press and hold the +>> / «- button for about 3
seconds
Answer/ end a call| Press the button
Reject a call| Press and hold the button for about 2 seconds
Redial last number| Press the button twice
PAIRING
- With the headphones turned off, press and hold the M button for about 6 seconds. The headphones will turn on and enter Bluetooth pairing mode. Blue and red LED flash.
- Enable the Bluetooth function on an external device and search for new Bluetooth devices.
- Select and connect with this device (KM Street Kids). 4. After successful pairing, the LED flashes blue every 10 seconds.
Notes:
- Every time the headphones are switched on, they will connect to last the connected device automatically. Please note, that your device must be on with the Bluetooth function turned on. To disable automatic pairing, clear the pairing list. Switch on the headphones, then press and hold the <<- and +>> buttons simultaneously for about 12 seconds. Then press and hold the M button to turn off the headphones. When you turn on the headphones again, they will not pair automatically with an external device.
- If pairing is not completed within 5 minutes, the headphones will automatically turn off.
- In that case, repeat the pairing process to pair the headphones with an external device.
- In case of problems with pairing, you may have to clear the pairing list (see point one).
- When the headphones are paired with an external device, it is possible to stream music to another pair of headphones by connecting them with the included 3,5 mm jack cable. Music is controlled by the headphones paired with the external device.
AUX MODE
Connect one plug of the 3,5 mm jack cable to the AUX input of headphones, then connect the other plug to the AUX output of the external device. In AUX mode, music is controlled by the external device.
CHARGING
- Connect one plug of the USB cable to the micro USB port of the headphones.
- Connect the other plug to the compatible PC USB port. 3. During charging, red LED is on. 4. When the battery is fully charged, the red LED goes off.
SPECIFICATION
- Speaker size: 30 mm
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32 Ohm
- Sensitivity: 93 dB+/-5 dB (at 1 kHz)
- SPL: 89 dB Supported formats: SBC, MP3, AAC
- Bluetooth: 5.0
- Bluetooth profiles: A2DP, AVRCP, HFP
- Bluetooth range: up to 8 m
- Talk time: up to 13 h
- Playback time: up to 15 h
- Standby time: up to 200 h
- Ports: AUX-in (3,5 mm), micro USB (charging)
- Built-in microphone
- Battery capacity: 400 mAh
- Power supply: 5 V, 500 mA
- Inset: 3,5 mm jack cable, charging cable, user’s manual
LEARN MORE
For more information on this product, go to
www.krugermatz.com.
Visit www.krugermatz.com website for more
products and accessories. In case of any doubts or questions reach out to our
Frequently Asked Questions section.
Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that wireless headphones
KM0656/ KM0657 is consistent with directive 2014/53/UE. The full text of the
EU Declaration of Conformity is available at the following Internet address:
www.lechpol.eu.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking is shown on the product or Its literature
indicates that It should not be disposed of with other household wastes at the
end of its working life. To prevent possible harm lo the environment or human
health from uncontrolled waste disposal, please separate this from other types
of waste and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract This product should not be mixed with
other commercial wastes for disposal. Made in China for LECHPOL ELECTRONICS
Sp. z o.o. Sp.k., ul. Karolinska 1, 08-400 Mine. 12
http://www.krugermatz.com/is a registered trademark
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>