Welland FG1919B Smart Body Fat Scale User Manual

USER MANUAL
Smart body fat scale
Scan the corresponding QR Code to download APP

http://www.wellandtec.com/fitdays/

Thanks for choosing smart body fat scale. This full-body composition scale can help you conveniently measure body weight, heart rate, Heart Index, BMI, body fat rate, visceral fat, body water, skeletal muscle rate, muscle mass, bone mass, protein, BMR, and body age.

IMPORTANT: Please read the instructions in this manual carefully before using the device. Failure to comply with the instructions given in the manual or using this scale in ways other then the ones mentioned in this manual may result in injury to yourself or damage to the scale.

RECORDED PARAMETERS

●Weight
●Body water
● Fat-free weight
●Body age (<16 years old)| ●BMI
●Skeletal Muscle rate
● Subcutaneous fat
●Heart Rate| ●Body fat rate
●Muscle mass
●Protein
●Heart Index| ●Visceral fat
●Bone mass
●BMR
●Height record
---|---|---|---

INDICATION SYMBOLS

them again to repeat the measuring process.

WHAT IS IN THE PACKAGE

• 1 x Smart Scale
• 1 x User Manual

! WARNING

• DO NOT use with medical implants such as pacemakers.
• DO NOT stand on the edge of the scale or jump on it.
• DO NOT overload the scale (MAX. 180kg / 400lb).
• DO NOT drop scale or droop objects on it as this may damage the sensors.
• DO NOT immerse the scale in water or use chemical cleaning agents. Clean the scale with slightly damp cloth.
• NOT recommended for pregnant women.
• NOT recommended for infants, toddlers, and children under 10 years of age.
• Any measurement obtained using this devise is for reference only and should not be considered as a medical opinion.
• Consult your primary care doctor or physician before making changes to your diet, exercise plan, or physical activities.
• Always place the scale on a hard, dry, and flat surface before measurement.
• Make sure your feet are dry before stepping on the scale.
• Connect the batteries in accordance with the correct polarities indicated.
• Remove batteries if the scale is not be used for a prolonged period of time.
• The user under 6 years old, only weight function, no BMI and body fat, etc. data.
• The user under 10 years old, only weight & BMI function, no body fat, etc. data.

SPECIFICATION

Product size: 300x275x25mm
VA screen display: 62x109mm
Powered by 4xAAA batteries
Weight unit: kg/lb/st (switch the units in the App and the scale will syn the units.)
Weight Limit: 6kg – 180kg (13.2lb – 400lb)
Account number: No limitation (each account can add 8 persons)
Baby mode: Allow you to scale the weight of baby

SUPPORT DEVICES:
IOS 8.0 or Higher
Android 6.0 or Higher
INSTALL FITDAYS

1. Search “Fitdays” in Apple Store or Google Play or scan the QR code below:http://www.wellandtec.com/fitdays/
2. Download and install the App on your device.
3. The App icon will appear on your phone or tablet after the installation is completed

HOW TO USE APP

1. Install the batteries
   Place the scale on the hard and flat ground.

2. Turn on the Bluetooth on your smart phone or tablet.

3. Register your own ID by email or social media account.

4. Add personal data and confirm OK
   Note: Enter the wrong gender, age, height, or corporeity level may result in measurements being inaccurate.

5. Tap your foot on the scale to activate the display. Wait until the display shows “0.0”(kg/lb)

6. Step on the scale with BARE feet to turn the scale on.
   NOTE :
   If stepping on the scale with socks, only weight and BMI will be measured and displayed on the main page. To get complete data, please step on the scale with bare feet, and the weight locked, you can read all the body composition data in the Fitdays App by touching more data.

7. After the weight lock, it will come to measure the body’s heart rate. The icon of the heart below is flashing during the scale is weighing and analyzing. Continue to stand on the scale until the measurement is finished, your phone has received all the data from the scale.

8. You can find the analysis report on Body Weight, BMI, BMR, Muscle, Bone Mass, etc. (see full details on More data >>). When you click Record, you can see your long-term track chat form. Fridays supports you to Zoom + the record for every function via the right icon; Fitdays also supports record for recently, week, month, and year;

9. Add or switch users by clicking your icon on the up-left, or click Me — > Manage users, then add personal data. The Smart scale can recognize which user is stepping on it and remind the user to switch to the correct user. Each account can support 24 users.

10. Weighing baby: click + –> Baby Mode. Step on the scale on your own, after scale gets your weight, and then hold the baby to get the weight of baby.

TROUBLESHOOTING GUIDE

1. Bluetooth not connected
   • The scale and smartphone must both have Bluetooth on.
   • Check the IOS version of your smartphone; it must be IOS 8.0 or higher / Andorid 6.0 or higher.
   • Click Me — > device to find the scale

2. Nobody fat data was measured when weighing
   • User must be barefoot to measure the body fat.
   • Make sure your feet and the scale are both dry.
   • Scale does not finish weighing when the number display is flashing (Keep standing on the scale for around 10 seconds until the number on the display stops flashing).
   • Bluetooth is not turned on.
   • Bluetooth is paired with a different scale.

3. The scale is producing inconsistent weights.
   • Check whether the scale is on a hard, flat surface.
   • Check each sensor foot on the back to make sure nothing is stuck to the bottom of it.
   • Remove the batteries to restart the scale.

4. The App displays the incorrect flat-muscle ratio
   The body parameter setting is incorrect, check to make sure that you enter the correct gender, height, and age.

5. How do I re-calibrate the scale after moving it or change the batteries?
   Step on the scale to turn it on. Let it automatically drop to 0.0kg/lb to calibrate.

6. The scale does not turn on.
   Remove the batteries and put them back. Make sure to insert the batteries in the correct direction.

7. How to change unit?
   When the scale is on and connected with the Fitdays App, please select the unit (kg/lb/st) in the Fitdays setting, and then the unit will syn to the scale.

Battery Advice

| * If the scale is not to be used for long periods, it’s recommended to remove
the battery to avoid damage to the scale due to possible battery leakage.

• Keep the battery out of reach of children.
  ---|---
  | * Do not mix old and new batteries, with different compositions or of different
  brands in order to prevent possible leakage, explosion.
• Do not heat or deform the batteries or explore to fire.
  | * Waste batteries should not be disposed of with household waste.
• Please check with your local authority for battery recycling advice.
  | *Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling advice.

Disposal

| The packaging material is recyclable. Please dispose of it in an environmentally friendly manner and take it to a recycling center.
---|---
| Dispose of the device in an environmentally friendly manner. Dispose of it at a recycling center for used electrical and electronic devices. You can obtain more information from your local authorities.
| The batteries should be removed prior to disposal of the device and disposed of separately from the device. To protect the environment, non-rechargeable and
rechargeable batteries may not be disposed of with normal household waste but
must be taken to suitable collection points. Also, note the relevant statutory regulations
governing the disposal of batteries.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>