ATEN 2XRT-0015G KVM Over IP Access Control Box User Guide
- June 3, 2024
- Aten
Table of Contents
ATEN 2XRT-0015G KVM Over IP Access Control Box
Package Contents
- 1 2XRT-0015G KVM over IP Access
- Control Box
- 1 user instructions
Hardware Review
- control button / LED
- USB connector
- PS/2 connector
- RJ-11 connector
- RS-232 connector
Basic Function & Compatible Devices
2XRT-0015G is a control button accessory to enable / disable remote KVM over
IP access.
Two statuses:
- Button status LED Function
- Pressed Red Light Disables remote access
- Released Dim Enables remote access
2XRT-0015G can be installed on several compatible devices: KVM over IP Switch – KN Series(with CS231TK / CS261TK / KA7171AK) / RCM101A / RCM101D / RCMDVI101 / RCMDVI00AT / RCMDVI40AT /RCMVGA101 / RCMDP101U KVM over IP Transmitter – KE6900T / KE6940T / KE8950T / KE8952T More compatible devices may be added in the future, for a complete list of compatible devices, please refer to www.aten.com. KN1108VA, KN1116VA, KN1132V, KN2116VA, KN4116VA, KN2132VA, KN4132VA, KN4164V, KN8132V, KN8164V, KN2124VA, KN4124VA, KN2140VA, KN4140VA
Hardware Installation
The installation steps of 2XRT-0015G with compatible devices are described below
KVM over IP Switch (KN Series):
A computer sharing device and a KVM adapter cable are required to connect
between the 2XRT-0015G and a KVM over IP switch (KN Series).
- Connect the RJ-11 connector of the 2XRT-0015G to the fi rmware upgrade port on the rear side of a computer sharing device (e.g. CS231TK).
- Connect the USB connector of the 2XRT-0015G to one of the USB ports in the region labeled “CONSOLE 2” on the rear side of the computer sharing device.
- Connect the USB and VGA connectors of a KVM adapter cable (e.g. KA7170) to the other USB port and the VGA port in the “CONSOLE 2” region of the computer sharing device.
- Connect one end of a Cat 5e/6 cable to the KVM adapter cable; connect the other end of the Cat 5e/6 cable to a KVM port of a KVM over IP switch (e.g. KN1132V).
KVM over IP Switch (RCM101A):
- Connect the PS/2 connector of the 2XRT-0015G to the purple (keyboard) PS/2 port of a RCM101A’s custom console cable.
- Connect the custom console cable to the PS/2 – USB console port on the rear side of a KVM over IP switch.
KVM over IP Switch (RCM101D & RCMDVI101):
Connect the PS/2 connector of the 2XRT-0015G to the purple control port on the
rear side of a KVM over IP switch.
KVM over IP Transmitter:
- Connect the RS-232 connector of the 2XRT-0015G to the RS-232 port (labeled AUX) on the rear side of a KVM over IP transmitter (e.g. KE6900T).
- Connect the USB connector of the 2XRT-0015G to a computer.
- Slide the slide switch on the rear side of the KVM over IP transmitter to the
RS-232 Confi g or Access Control position.
Note : Make sure the connected devices are powered on.
References
- ATEN - Simply Better Connections | ATEN U.S.A.
- ATEN宏正_KVM切换器_多电脑切换器领导品牌 | 北京宏正腾达科技
- Downloads | ATEN Corporate Headquarters
- ATENジャパン - KVMスイッチ、映像機器管理、エネルギー管理のソリューションプロバイダー | ATEN Japan
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>