UBIQUITI UF-AE UFiber ActiveEthernet Converter User Guide

UBIQUITI UF-AE UFiber ActiveEthernet

 **Converter User Guide**

Package Contents

Installation Requirement

The UF-AE requires an active fiber SFP module and does not support passive GPON SFP module.

Hardware Overview

Ports

Hardware Installation

Wall Mounting

2.

3.

4.

Connecting Fiber

The UF-AE requires an active fiber SFP module and does not support passive GPON SFP modules.

Note : You can use an SFP+ module; however, the maximum speed is 1 Gbps.

1.

2.

3.

Connecting LAN

Connecting Power

Note : The airCube AC provides a 1 Gbps Ethernet connection and Wi-Fi connectivity with PoE passthrough, so it is the ideal complement to the device for CPE installations.

OR

WARNING : The switch port must comply with the power specifications listed in this Quick Start Guide.

Specifications

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.

WARNING : To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

WARNING : Do not use this product in location that can be submerged by water.

WARNING : Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

WARNING : CLASS 1 LASER PRODUCT – Do not look into the ends of the fiber optic cable or SFP modules while converters are powered.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

Australia and New Zealand

Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

CE Marking

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

Declaration of Conformity

Online Resources

© 2020 Ubiquiti Inc. All rights reserved.

References

• Ubiquiti - Warranty
• community.ubnt.com/
• WEEE Compliance Statement
• Software Downloads - Ubiquiti
• Ubiquiti - Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>