ACURITE 01193M Wireless Charging Forecaster User Guide
- June 5, 2024
- Acurite
Table of Contents
ACURITE 01193M Wireless Charging Forecaster
SETUP REQUIRES
- Weather display with wireless charging pad Power Adapter (2 x AA backup batteries recommended)
- Temperature & Humidity Sensor
- 2 x AA alkaline or lithium batteries for sensor (not included)
INSTALL SENSOR BATTERIES
PLUG-IN DISPLAY WITH THE POWER ADAPTER AND INSTALL BACKUP BATTERIES (optional, recommended). CONFIGURE DISPLAY SETTINGS BY USING THE ARROWS TO CHANGE A SETTING AND PRESSING “SET” TO SAVE AND CONTINUE TO THE NEXT SETTING.
- Clock Hour/Minute
- Month/Day/Year
- Units Preference (F/C) You can edit your settings at any time by pressing the “SET” button.
PLACE SENSOR OUTSIDE
Hang the sensor in a suitable location, like a well-covered tree branch, by
using the integrated hang holes or string (string not included).
- At least 5 feet (1.5 meters) off the ground
- Out of direct sunlight
- Away from heat and humidity sources
- Within 165 feet (50 meters) of display \ I /
ONLINE PRODUCT REGISTRATION
Register your product online within 30 days from the date of purchase at
www.acurite.com/product-registration
WEATHER FORECAST LEARNING MODE
The Self-Calibrating Forecast uses a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the self-calibrated pressure is tuned in to your location and
the unit is ready for superior weather prediction.
SET ALARM CLOCK
- Press and hold the “ALARM” button until the Alarm time flashes.
- Adjust the alarm hour and minute using the up/down arrows, pressing “SET” to save and continue.
TURN THE ALARM CLOCK ON OR OFF
Press the “ALARM” button once to turn the alarm on or off. When alarm is
turned on, the screen will flash the currently set alarm time for 3 seconds.
ADJUST DISPLAY BRIGHTNESS
Press the “SNOOZE/ LIGHT” button to adjust the brightness off the screen,
or to set to auto-dimming at night.
WIRELESSLY CHARGE PHONE OR SMARTWATCH qi
This Weather Display with a charging pad is Qi Certified. Products marked
as Qi Certified have passed rigorous, independent laboratory tests for safety,
interoperability and energy efficiency. This wireless charging pad will
deliver a safe and reliable wireless charging experience. For phones and
watches able to be charged wirelessly, place your device on the wireless
charging pad with the charging location lined up, and confirm your device
begins to charge. A charging icon will also appear on the weather display.
NOTE:
The weather display must be powered by a power adapter to use wireless
charging.
Troubleshooting
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Canada Statement This device contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the
following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. The interference potential of the device could cause interference to the system whose fundamental is 110 KHz to148 KHz. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.The device prevent from using with damping environment. Use only in according with described instructions in order not to damage the device.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 15 cm from all persons.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>