AcuRite 00424CA Digital Thermometer Instruction Manual

AcuRite 00424CA Digital Thermometer

Questions? Contact Customer Support at 877-221-1252 or visit www.AcuRite.com

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.

Unpacking Instructions

Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove it.

Package Contents

1. Display unit
2. Outdoor sensor
3. Instruction Manual

IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

PRODUCT REGISTRATION Register online to receive 1 year warranty protection www.AcuRite.com

Features & Benefits

1. Current Outdoor Temperature
   The Arrow icon indicates the direction the temperature is trending.

2. High ( )Temperature Record
   Highest temperature recorded over the past 24 hours.

3. Low ( ) Temperature Record
   Lowest temperature recorded over the past 24 hours.

4. Current Indoor Temperature
   The Arrow icon indicates the direction the temperature is trending.

5. Display Low Battery Indicator

6. Outdoor Sensor Low Battery Indicator

7. Outdoor Sensor Signal Strength

8. Integrated Hanger
   For easy placement.

9. Wireless Signal Indicator
   Flashes when data is being sent to the display unit.

10. Battery Compartment Cover

Install or Replace Batteries

AcuRite recommends high-quality alkaline batteries for the best product performance. Heavy-duty or rechargeable batteries are not recommended. The outdoor sensor requires lithium batteries in low-temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.

Outdoor Sensor

1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.

Display Unit

1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.

Select Degrees Fahrenheit or Celsius

• To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, press the “ºC/ºF” button located inside the battery compartment of the display.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in free, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product.

• Display Unit Placement
  Place the display unit in a dry area free of dirt and dust. The display unit stands upright for tabletop use or is wall-mountable.

• Outdoor Sensor Placement
  Sensors must be placed outside to observe outdoor conditions. The sensor is water resistant and is designed for general outdoor use, however, to extend its life place the sensor in an area protected from direct weather elements.
  Hang the sensor using the integrated hang holes or hanger, or by using string (not included) to hang it from a suitable location, like a well-covered tree branch. The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct sunlight and away from heat sources or vents.
• The display unit and outdoor sensor must be within 165 ft (50 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.)

Setup is Complete

• The sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly.

OPERATION

Using the Thermometer

High/Low Records The “ “ and “ “ records are reset every 24 hours. The time records are cleared is determined by the time the unit was powered on. For example, if the unit was powered on at 6:00 pm, then high/low records reset at 6:00 pm daily.

Troubleshooting

No outdoor sensor reception

 no bars

| ****

If the wireless signal indicator shows no bars:

• Relocate the display unit and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).

• Use standard alkaline batteries (or lithium batteries in the sensor when the temperature is below -4ºF/-20ºC). Do not use heavy-duty or rechargeable batteries. NOTE: It may take up to 20 minutes for the display unit and sensor to synchronize after the batteries are replaced.

---|---

Outdoor temperature is flashing or

showing dashes

| Flashing of the outdoor temperature is generally an indication of wireless interference.

1.  Bring both the sensor and display unit indoors and remove at least one battery from each.

2.  Reinstall the battery in the outdoor sensor.

3.  Reinstall the battery in the display unit.

4.  Let the units sit within a couple of feet of each other for about 20 minutes to gain a strong connection.

Inaccurate temperature

| • Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents (see page 5).
The display screen not working| • Check that the batteries are installed correctly. Batteries may need to be replaced.

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call 877-221-1252 for assistance.

Care & Maintenance

• Display Unit Care
  Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

• Outdoor Sensor Care
  Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Specifications

Indoor: 32ºF to 122ºF; 0ºC to 50ºC
WIRELESS RANGE| 165 ft / 50 m depending on home construction materials
WIRELESS FREQUENCY| 433 MHz
POWER| Display: 2 x AA alkaline batteries

Sensor: 2 x AA alkaline or lithium batteries

DATA REPORTING| 30-second updates

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1. This device may NOT cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference received, including interference that may cause undesired operation of the device.

Customer Support

AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:

• 877-221-1252
• info@chaney-inst.com

24/7 support at www.AcuRite.com

• Installation Videos
• Instruction Manuals
• Replacement Parts
• Register your Product
• Support User Forum
• Submit Feedback & Ideas

Limited One Year Warranty

• At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures are of good material and workmanship and are free of defects when properly installed and operated for a period of one year from the date of purchase.
• We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.
• Chaney Instrument Co. warrants that all products it manufactures are of good material and workmanship and are free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from the date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures that have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.
• The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential, or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm, or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, firm, or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
• For in-warranty claims: Chaney Instrument Co. 965 Wells St., Lake Geneva, WI 53147

AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™.

www.AcuRite.com

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.

FREQUENTLY ASKED QUESTIONS

What temperature range does the AcuRite 00424CA Digital Thermometer measure?

The AcuRite 00424CA Digital Thermometer measures temperatures from -40°F to 158°F (-40°C to 70°C).

Is the AcuRite 00424CA Digital Thermometer suitable for both indoor and outdoor use?

Yes, the AcuRite 00424CA Digital Thermometer is designed for both indoor and outdoor use, thanks to its durable construction and weather-resistant sensor.

How does the AcuRite 00424CA Digital Thermometer transmit outdoor temperature data?

The AcuRite 00424CA Digital Thermometer uses a wireless sensor to transmit outdoor data to the indoor display.

What type of batteries does the AcuRite 00424CA Digital Thermometer require?

The AcuRite 00424CA Digital Thermometer requires AA batteries for both the indoor and outdoor units.

How often does the AcuRite 00424CA Digital Thermometer update temperature readings?

The AcuRite 00424CA Digital Thermometer updates temperature readings every 60 seconds for accurate monitoring.

Can the AcuRite 00424CA Digital Thermometer display both Fahrenheit and Celsius?

Yes, the AcuRite 00424CA Digital Thermometer can display temperatures in both Fahrenheit and Celsius.

What is the transmission range of the AcuRite 00424CA Digital Thermometer's outdoor sensor?

The AcuRite 00424CA Digital Thermometer's outdoor sensor can transmit data up to 165 feet (50 meters) to the indoor display.

What is the best location for mounting the AcuRite 00424CA Digital Thermometer's outdoor sensor?

Mount the outdoor sensor in a shaded, protected area to prevent direct sunlight or moisture interference.

What should I do if the AcuRite 00424CA Digital Thermometer shows inaccurate readings?

Replace the batteries and ensure the outdoor sensor is in a location free from direct sunlight and moisture.

How long do the batteries typically last in the AcuRite 00424CA Digital Thermometer?

With proper use, the batteries in the AcuRite 00424CA Digital Thermometer can last several months.

How do I switch between Fahrenheit and Celsius on the AcuRite 00424CA Digital Thermometer?

You can switch by pressing the (°F/°C) button on the indoor display.

What is the purpose of the trend arrows on the AcuRite 00424CA Digital Thermometer?

The trend arrows indicate whether the temperature is rising, falling, or remaining steady.

How do I reset the AcuRite 00424CA Digital Thermometer?

Remove and reinsert the batteries in both the indoor display and the outdoor sensor to reset the system.

Is the AcuRite 00424CA Digital Thermometer easy to set up?

Yes, the AcuRite 00424CA Digital Thermometer is simple to set up by following the instructions provided.

Does the AcuRite 00424CA Digital Thermometer come with a warranty?

Yes, the AcuRite 00424CA Digital Thermometer usually comes with a one-year warranty. Check the manual for specific warranty terms.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: AcuRite 00424CA Digital Thermometer Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>