00505 Weather Station

Product Information

Specifications:

• Model: 00505
• Power Source: Power Adapter or Batteries
• Display: LCD Screen
• Outdoor Sensor: Wireless with Integrated Hanger
• Indicators: Signal Strength, Low Battery, Temperature Trend,
  Barometric Pressure, Moon Phase, Humidity, Forecasting

Product Usage Instructions

Unpacking Instructions

Remove the protective film from the LCD screen by locating the
tab and peeling it off before use.

Package Contents:

1. Display with Tabletop Stand
2. Outdoor Sensor
3. Power Adapter
4. Instruction Manual

Sensor Setup

1. Install or Replace Batteries:
2. Slide off the battery compartment cover.
3. Insert 2 x AA batteries following the polarity diagram.
4. Replace the battery cover.

Display Setup

1. Install or Replace Backup Batteries (optional):
2. Remove the battery compartment cover.
3. Insert 3 AAA batteries.
4. Replace the battery cover.
5. Plug in Power Adapter for optimal performance.

Frequently Asked Questions (FAQ)

Q: How do I register the product for warranty service?

A: Visit www.acurite.com/product-registration to register online
and receive 1-year warranty protection.

Q: What type of batteries should I use for the sensor and

display?

A: For the sensor, use high-quality alkaline or lithium
batteries. For the display, use high-quality alkaline batteries.
Heavy-duty or rechargeable batteries are not recommended.

Q: What is the purpose of the outdoor sensor signal strength

indicator?

A: The indicator flashes when data is being sent to the display,
ensuring you have a reliable connection between the sensor and the
display unit.

Q: How does the self-calibrating forecasting feature work?

A: The forecasting feature pulls data from the outdoor sensor to
generate a personalized weather forecast for your location. It
continuously learns and updates to provide accurate
predictions.

Instruction Manual
Weather Station
model 00505

CONTENTS
Unpacking Instructions ……….. 2 Package Contents ……………… 2 Product Registration …………… 2 Features & Benefits: Sensor….. 2 Features & Benefits: Display…. 3 Setup ……………………………… 5 Sensor Setup ……………………. 5 Display Setup …………………… 6 Intelli-Time® Clock ……………… 7 Set the Time, Date & Units …… 7

Backlight Settings ………………. 7 Placement Guidelines …………. 8 Using the Weather Station…… 9 Troubleshooting ………………..10 Care & Maintenance…………. 11 Calibration ……………………… 11 Replace Intelli-Time® Battery ..12 Specifications……………………12 FCC Information ……………….13 Customer Support ……………..14 Warranty…………………………14

Questions? Visit www.acurite.com/support
SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.
Package Contents
1. Display with Tabletop Stand 2. Outdoor Sensor 3. Power Adapter 4. Instruction Manual

IMPORTANT
PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online to receive 1-year warranty protection
www.acurite.com/product-registration

Features & Benefits
1

2

OUTDOOR SENSOR

1. Integrated Hanger For easy placement.
2. Wireless Signal Indicator Flashes when data is being sent to the display.
3. Battery Compartment Cover

3

2

Features & Benefits
1
15 14 13 12 11

2
3 4 5 6 7 8 9

10

FRONT OF DISPLAY

Icon

Indicates display is in auto-dimming

brightness mode (see page 7).

2. Sensor Low Battery Indicator

3. Outdoor Sensor Signal Strength

4. Current Outdoor Temperature Arrow icon indicates the direction temperature is trending.

5. TODAY’S HIGH Indicator Indicates today’s HIGH records are being viewed.

6. TODAY’S LOW Indicator Indicates today’s LOW records are being viewed.

7. Current Barometric Pressure Indicates the direction pressure is trending.

8. Moon Phase

9. Current Indoor Humidity
10. Button For momentary backlight and dimmer settings.
11. Current Indoor Temperature
12. Intelli-Time® Clock Pre-programmed to the correct time and automatically updates for Daylight Saving
13. Date
14. 12 to 24 Hour Weather Forecast Self-Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast.
15. Learning Mode Icon Disappears after weather forecast selfcalibration is complete.

3

Features & Benefits
1

2

6

3

4 7
8

5

9

BACK OF DISPLAY
1. Integrated Keyhole For easy wall mounting.
2. Button For setup preferences and viewing HIGH records.
3. SET Button For setup preferences.
4. Battery Compartment

5. Battery Compartment Cover 6. Button
For setup preferences and viewing LOW records. 7. Intelli-Time® Battery Compartment 8. Plug-in for Power Adapter 9. Power Adapter
4

SETUP
Sensor Setup
Install or Replace Batteries AcuRite recommends high quality alkaline or lithium batteries in the outdoor sensor for the best product performance. Heavy duty or rechargeable batteries are not recommended.
The sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the sensor for temperatures below -4ºF / -20ºC.

1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.

Install Batteries 2 AA batteries

5

Display Setup
1 Install or Replace Backup Batteries (optional)
AcuRite recommends high quality alkaline batteries in the display for the best product performance. Heavy duty or rechargeable batteries are not recommended.
1. Remove the battery compartment cover.

2. Insert 3 x AAA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/­) diagram in the battery compartment.
3. Replace the battery cover.
2 Plug in Power Adapter
For the best performance, plug in the power adapter as the main power source for this product.

1 Install Backup Batteries
(optional) 3 AAA batteries

2 Plug in Power Adapter
IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage. Power adapter is recommended as the primary power source to enjoy the full functionality of this product.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that will not be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
6

Intelli-Time® Clock
Intelli-Time products are pre-programmed with the correct time and date. Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time.
Set the Time, Date & Units
Press and release the S E T button to enter SETUP MODE. Once in setup mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “” or “” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the S E T button again to adjust the next preference. The preference set order is as follows:
DST (Daylight Saving Time ON or OFF) TIME ZONE (NST AST EST CST MST PST AKT HAT) CLOCK HOUR CLOCK MINUTE CALENDAR MONTH CALENDAR DATE CALENDAR YEAR TEMPERATURE UNITS (ºF or ºC)
If you live in an area that observes Daylight Saving Time, DST should be set to ON, even if it is not currently Daylight Saving Time.
You will automatically exit SETUP MODE if no buttons are pressed for 10 seconds. Enter setup mode at any time by pressing the SET button.
Display Backlight Settings
This weather station’s color display features three different lighting settings: High (100%) brightness, Medium (60%) brightness and Low (15%) brightness. Using battery power alone, the backlight is available momentarily for 10 seconds by pressing the ” ” button. When display is powered with the power adapter, backlight remains on at 100% brightness. Press ” ” button once to dim to 60% brightness; press again to dim to 15%, press a 3rd time to enter “AUTO DIM” mode.
AUTO DIM MODE: Automatically adjusts display brightness based on time of day.
6:00 a.m. – 9:00 p.m. = 100% brightness 9:01 p.m. – 5:59 a.m.= 15% brightness
7

Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and outdoor sensor are critical to the accuracy and performance of this product.
Display Placement
Place the display in a dry area free of dirt and dust. Display stands upright for tabletop use or is wall-mountable.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions. Sensor is water resistant and is designed for general outdoor use, however, to extend its life place the sensor in an area protected from direct weather elements.
Hang the sensor using the integrated hang holes or hanger, or by using string (not included) to hang it from a suitable location, like a well covered tree branch. The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air to circulate around the sensor.
Important Placement Guidelines
· To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents.
· Display and outdoor sensor must be within 165 ft (50 m) of each other.
· To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
· To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).

AT LEAST TV 3
(.9 m)
APART

(165 feet maximum) (50 meters)

Setup is Complete
The sensor will now synchronize with the display. It may take a few minutes for synchronization to complete. Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly.

8

OPERATION
Using the Weather Station Learning Mode
Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.
Weather Forecast
AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy personalized for your exact location.

Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:

NOUVEAU

GIBBEUSE CROISSANTE 1ER QUARTIER PLEINE 3E QUARTIER GIBBEUSE DÉCROISSANTE

High & Low Records
Today’s high and low records are displayed for indoor temperature and humidity and outdoor temperature. Today’s records automatically clear at 12:00am midnight every day. View today’s high or low records by pressing and releasing the “” or “” buttons. Press and release again to view current readings.
To manually clear all of today’s LOW recorded values, press and release the “” button to view low records, then press and hold the “” button for 2 seconds. Dashes display to confirm you have cleared the LOW records.
To manually clear all of today’s HIGH recorded values, press and release the “” button to view high records, then press and hold the “” button for 2 seconds. Dashes display to confirm you have cleared the HIGH records.

9

Troubleshooting

Problem

Possible Solution

No outdoor sensor reception
no bars

If the wireless signal indicator shows no bars:
· Relocate the display and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other.
· Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
· Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries. NOTE: It may take a few minutes for display and sensor to synchronize after batteries are replaced.

Display screen not working

· Check that the power adapter is plugged into the display and an electrical outlet.

Outdoor temperature
is flashing or showing dashes

Flashing of the outdoor temperature is generally an indication of wireless interference.
1. Bring both the sensor and display indoors, side by side and remove power adapter/batteries from each.
2. Reinstall batteries in the outdoor sensor.
3. Reinstall power adapter/batteries in display.
4. Let the units sit within a couple feet of each other for a few minutes to gain a strong connection.

Inaccurate forecast

· Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions.
· Has Learning Mode icon disappeared from the display? Learning Mode must complete before forecast and pressure will be accurate.
· Allow unit to run continuously for 33 days. Battery removal or resetting the display will restart Learning Mode. After 14 days, forecast should be fairly accurate, however Learning Mode calibrates for a total of 33 days.

Inaccurate temperature or humidity

· Make sure both the display and sensor are placed out of direct sunlight and away from any heat sources or vents (see page 8).
· Make sure the display is positioned away from moisture sources (see page 8).

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.acurite.com/support.
10

Care & Maintenance
Display Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.
Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Calibration Calibrate Temperature & Humidity
The indoor temperature and humidity and outdoor temperature readings can be calibrated on the display to improve accuracy. Calibration can improve accuracy when sensor placement or environmental factors impact your data accuracy. 1. To access calibration mode, press AND HOLD the “”, “”, and “SET”
buttons for at least 5 seconds. 2. Once in calibration mode, the preference you are currently setting will be
highlighted on the display. 3. Press the “” or “” buttons to calibrate the data value higher or lower
from the actual reading. 4. Press the “SET” button to confirm the calibration adjustment. The ” ” icon
will remain illuminated next to calibrated values. 5. The next adjustable data will begin flashing, indicating it is ready to be
calibrated. Repeat Steps 1 – 4 to calibrate additional data. The preference set order is as follows: OUTDOOR TEMPERATURE INDOOR TEMPERATURE INDOOR HUMIDITY
After 20 seconds of inactivity, the display will save the adjustments and exit calibration mode. Note: Calibrations will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.
11

Replace Intelli-Time® Clock Battery
Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. Time and date will need to be entered after replacing Intelli-Time battery. To replace the Intelli-Time battery:
1. Locate the coin cell battery compartment door in the battery compartment of the display. Unscrew and remove the compartment cover.
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.
3. Screw in the battery cover.

Specifications

TEMPERATURE RANGE HUMIDITY RANGE WIRELESS RANGE OPERATING FREQUENCY POWER
DATA REPORTING

Outdoor: -40ºF to 158ºF; -40ºC to 70ºC Indoor: 32ºF to 122ºF; 0ºC to 50ºC Indoor: 1% to 99% RH
165 ft / 50 m depending on home construction materials 433 MHz Display: 5V power adapter 1 x CR2032 coin cell battery 3 x AAA alkaline batteries (optional) Sensor: 2 x AA alkaline or lithium batteries
Outdoor: 30 second updates
Indoor: 60 second updates

12

FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and the receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.
13

Customer Support AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us via one of the following ways:
Chat with our support team at www.acurite.com/support

Email us at support@chaney-inst.com
Instruction Manuals Replacement Parts

IMPORTANT
PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online to receive 1-year warranty protection
www.acurite.com/product-registration

Limited 1-Year Warranty

AcuRite is a wholly owned subsidiary of Chaney Instrument

We expressly disclaim all liability for special, consequential, or

Company. For purchases of AcuRite products, AcuRite provides the incidental damages, whether arising in tort or by contract from any

benefits and services set forth herein.

breach of this warranty. Some states do not allow the exclusion or

For purchases of Chaney products, Chaney provides the benefits and services set forth herein. We warrant that all products we

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

manufacture under this warranty are of good material and

We further disclaim liability from personal injury relating to

workmanship and, when properly installed and operated, will be its products to the extent permitted by law. By acceptance of

free of defects for a period of one year from the date of purchase. any of our products, the purchaser assumes all liability for the

Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by us, and at our sole option, be repaired or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser. We hereby disclaim all responsibility for such transportation costs and charges.

consequences arising from their use or misuse. No person, firm or corporation is authorized to bind us to any other obligation or liability in connection with the sale of our products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours.

This warranty will not be breached, and we will give no credit for In no case shall our liability for any claim relating to our products,

products which have received normal wear and tear not affecting your purchase or your use thereof, exceed the original purchase

the functionality of the product, been damaged (including by acts price paid for the product.

of nature), tampered, abused, improperly installed, or repaired or

altered by others than our authorized representatives.

Applicability of Policy

Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not feasible, we may, at our option, refund the amount of the original purchase price.

This Return, Refund, and Warranty Policy applies only to purchases made in the United States and Canada. For purchases made in a country other than the United States or Canada, please consult the policies applicable to the country in which you made your purchase. Additionally, this Policy applies only to the original

THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY purchaser of our products. We do cannot and do not offer any FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER return, refund, or warranty services if you buy products used or WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES from resale sites such as eBay or Craigslist.

OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT

Governing Law

LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY This Return, Refund, and Warranty Policy is governed by the laws of

AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR the United States and the State of Wisconsin. Any dispute relating to

PURPOSE.

this Policy shall be brought exclusively in the federal or State courts

having jurisdiction in Walworth County, Wisconsin; and purchaser

consents to jurisdiction within the State of Wisconsin.

14

15

Printed in China 00505 INST 102223

© Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.

References

• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>