SUNMI NT310 80mm Kitchen Cloud Printer User Guide
- June 5, 2024
- SUnmI
Table of Contents
SUNMI NT310 80mm Kitchen Cloud Printer
Printer Profile
-
Door Cover
-
Door Cover Button
It is used to open the door cover and install/replace the printing roll paper. Press the door cover button and the door cover will pop open automatically. -
Power Button
Used for controlling the printer power; Press “|” to turn on the printer, and press “No ID” to turn off the printer. -
Paper Feed Button
Long press the paper feed button to start blank paper feed, and release to stop paper feed. -
Volume Adjustment Button
“ ”means volume up,，“ ”means volume down. -
Abnormality Indicator
The red light is on, indicating that the printer is short of paper, blocked with paper or with abnormal voltage. The red light flashes, indicating that the print head is overheated. The red light goes out, indicating that the printer is normal. -
Network Indicator
The blue light is on, indicating that the device is connected to the server. The blue light goes out, indicating that the device is disconnected from the server. -
Power Indicator
The green light is on, indicating the startup state; The green light goes off, indicating the shutdown state. -
Reminder Indicator
The white light flashes, indicating that there is paper to be taken away or the paper is blocked. The white light is on, indicating that the paper roll is about to run out (only the sensor with paper will be equipped with this function); The white light goes out, indicating that there is no reminder. -
Cash Box Port
Connect the cash box and drive the cash box to unlock. This equipment only supports external 24V/1A cash box. Please pay attention to the electrical performance parameters of the cash box. When connecting the cash box, ensure that it is shut down. -
USB Port
Connect POS machines and other equipment to realize USB printing; Ensure that the printer is shut down when connecting the data cable. -
DC Power Port
Connect 24V/2.5A DC to supply power to the printer; When connecting the power cord, ensure that the printer power button is in the off position -
Lan Network Port
Connect the LAN to complete the printing of issued orders from other devices in the LAN; Connect to the WAN to complete the printing of orders issued in the cloud. -
Pairing Button
Long press for more than 3 seconds to enter the network pairing state. Double- click to execute the network self-inspection program and print the network detection report.
Paper Loading Instructions
- Press the door cover button to open the printer flip cover.
- Place the printer roll in the direction shown in the figure.
- Cover the printer flip cover (Note: When printing blank, please make sure that the paper roll is installed in the correct direction)
Common Problems & Troubleshooting
In case of printer failure, please refer to this chapter for corresponding treatment. If the problem still cannot be solved, please contact the distributor or manufacturer.
Note: When cleaning the print head or paper feed rubber roller, do not
scratch the print head and rubber stick with hard objects (such as tweezers);
In order to improve the service life of the print head, it is recommended to
clean the print head and rubber stick every month.
Please use cotton swabs dipped in anhydrous alcohol to gently wipe the print
head heating sheet during cleaning.
Basic Specs
Barcode Specifications
UPC-A\UPC-E\EAN-13\EAN-8\Code 11\Code 39\Code 39 Extended\Code 2 of 5 Matrix\Code 2 of 5 Interleaved\Code 2 of 5 Industrial\Code 2 of 5 IATA\PDF417 Truncated\PDF417\Code 2 of 5 Datalogic\CODABAR\Code 93\Code 128\GS1 DataBar\GS1 DataBar Expanded\MSI Plessey
Precautions
Security Warning
- Please insert the AC plug into the AC socket corresponding to the identification input on the printer;
- It is strictly prohibited to use it in the presence of any potentially explosive gas.
- Non-professionals should not disassemble the printer at will to avoid danger.
- This is a Class A product. In the living environment, this product may cause radio interference. In this case, the user may be required to take practical measures against interference.
Important Safety Instructions
- Avoid installation or use during lightning, otherwise, there is a risk of lightning strike;
- When you find abnormal smells, overheating or smoke, please cut off the power supply immediately.
- The paper tearing knife is sharp, please do not touch it!
- Avoid using in humid environments; Avoid using in dusty or inflammable and explosive occasions.
Recommendations
- Do not use it near water or humid environment to prevent liquid from falling into the terminal.
- Do not use in extremely cold and hot environments, such as cigarettes close to fire sources or ignited;
- Try to use it in a clean and dust-free environment to prevent small items from falling into the terminal.
- Do not use in the vicinity of medical equipment without permission.
Statement
The Company is not responsible for the following situations:
Damage caused by use and maintenance not under the conditions described in
this Guide;
Damage or problems caused by options or consumables (not the original products
or approved products provided by the Company). (the user has no right to
modify or change the product without the consent of the Company)
Disclaimer
Due to the update of the product, some details of this Guide may not be in
conformity with the product. Please refer to the actual product.
The right to interpret this Guide belongs to the Company. We reserve the right
to amend this Guide without prior notice.
Usage Scenarios
It is mainly used in such commercial scenarios as food delivery, scan-to-
order, and order broadcasting.
Target customers: restaurants, bakeries, retail stores.
Available functions: order printing, order and payment information
broadcasting.
Precautions Table of Toxic and Hazardous Substances and Content in the Product
Part Name
| Toxic or harmful substances or elements
---|---
Pb| Hg| Cd| Cr(VI)| PBB| PBDE
Circuit board assembly| X| O| O| O| O| O
Print head assembly| O| O| O| O| O| O
Structural part| O| O| O| O| O| O
Package| O| O| O| O| O| O
O : indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006.
X: indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the component exceeds the limit stipulated in SJ/T 11363-2006. However, as for the reason, because there is no mature and replaceable technology in the industry at present.
The products that have reached or exceeded environmental protection service life should be recycled and reused according to the Regulations on Control and Management of Electronic Information Products, and should not be discarded randomly.
FCC Statement
Please take attention that Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Manufacture
Shanghai Sunmi Technology Co., Ltd.
Room 605,Block 7,KIC Plaza,No.388 Song Hu Road Yang Pu
District,Shanghai,China
Please read this Guide carefully before using the product and keep it
properly.
For more help, please feel free to visit SUNMI’s website
www.sunmi.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>