Sunmi FM010 Store Sense Camera User Guide

Sunmi FM010 Store Sense Camera

Package Item List

Store Sense Camera, power adaptor, user guide, base, mounting sticker and screws.

Basic Specs

Installation Guide

1. Install a TF card (Optional. A TF card needs to be purchased separately.) Please gently insert the TF card to the end of the slot following the direction indicated.
2. Installation direction (Recommended)
   This camera should be installed on a ceiling. Please see the instruction below for the positions of mounting sticker, base and camera, and the steps to install the camera in order to achieve your desired monitoring effect.

Download APP

Before using the device, please complete user registration by downloading SUNMI Assistant through searching on Tencent Appstore/SUNMI App Store or scanning the QR code below.

Configure Software

1. After downloading SUNMI Assistant, please register and log in, and click “Device” on the page bottom.
2. Click “Add a Device”, and select Store Sense Camera.t
3. Please follow the tips on the APP to complete device network setting.
4. Log in https://store.sunmi.com through a computer browser to check more IPC settings and use more SUNMI application services.

Applicable Scenarios
A ceiling-installed camera for indoor monitoring.

Target Users
Merchants and network administrators.

Functions
Monitor the whole store and display surveillance videos on the Web end or App.

Table of Toxic and Hazardous Substances and Content in the Product

This table is made in accordance with SJ/T11364.

• This symbol indicates that the content of this toxic or hazardous substance in all homogeneous material is under the limit specified in the GB/T26572.
• This symbol indicates that the content of this toxic or hazardous substance in at least one homogeneous material exceeds the limit specified in the GB/T26572.

The “environment-friendly use period” of the device is 10 years, which is shown as the figure below. Parts that can be replaced, for example, the charger, have different environment-friendly use periods. The environment- friendly use period can only be an effective period when the device is used in the normal conditions stated in this user guide.

Positioning & drilling

Stick the sticker to the position on a ceiling where you choose to install your camera and drill.

Fix the base
Fix the base to the ceiling with the screws in this package.

Install the camera
Screw the camera and the base in place, and connect cables including the power cable and network cable.

Illustration on the Status Indicator

• Blue On: Connected/Normal
• Blue Blinks: The camera is connected for video playback
• Green Blinks: Network error/waiting for being connected and configurated Green On: The device has been reset/is rebooting

Regulatory Information

FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help

FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

EU Conformity Statement

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

LEGAL INFORMATION ABOUT INTELLECTUAL PROPERTY
All company, product and service names mentioned herein are trademarks, registered trademarks or service marks of their respective owners. Shanghai Sunmi Technology Co., Ltd. reserves the right to revise the content of this document at any time without prior notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storing in a retrieval system, or translated into any language in any form without prior written permission of Shanghai Sunmi Technology Co., Ltd.
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the Store Sense Camera is in compliance with the RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com.

Manufacturer: Shanghai SUNMI Technology, Co., Ltd. Address: Room 605, Block 7, KIC Plaza, No.388 Song Hu Road Yang Pu District, Shanghai, China.

References

• SUNMI - BIoT for Business 4.0
• SUNMI STORE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>