GM Lighting SHWD LUXcontrol 300 Watt 120-Volt Single Pole Wi-Fi Smart Dimmer Switch Instruction Manual
- June 5, 2024
- GM Lighting
Table of Contents
- GM Lighting SHWD LUXcontrol 300 Watt 120-Volt Single Pole Wi-Fi Smart
- Overview
- PAIRING YOUR DIMMER TO VOICE CONTROL
- DOWNLOADING, INSTALLING and CONNECTING the LUXcontrol APP to YOUR
- BEFORE YOU START
- KEY SPECIFICATIONS
- SYSTEM REQUIREMENTS
- DIMMER INSTALLATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GM Lighting SHWD LUXcontrol 300 Watt 120-Volt Single Pole Wi-Fi Smart
Dimmer Switch
Overview
PAIRING YOUR DIMMER TO VOICE CONTROL
GM Lighting’s LUXcontrol is your gateway to enabling Smart Home lighting
control. Once you have the dimmer recognized by the LUXcontrol app (see set-up
instructions at right), follow your Alexa® or GoogleHome™ instructions to
introduce LUXcontrol lighting to your Smart Home voice system.
If you still have questions or need extra help, we’re here for you! See our
website: www.gmlighting.net
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its
affiliates. ‘iOS’ is a registered trademark of Apple.
DOWNLOADING, INSTALLING and CONNECTING the LUXcontrol APP to YOUR
HANDHELD DEVICE
GM Lighting’s LUXcontrol app is a free utility that enables total control over your residential or commercial lighting application, along with other appliances that the app may find.
Follow the step by step instructions at right. If you are having difficulty, check your Wi-Fi connec-tion and insure that your SHWD Smart Home Dimmer is installed correctly and is manually able to dim your lighting.
- Download and install the App LUX Control
- Open the App and press “Add Device
- Press “Auto Scan” on top to start pairing
- During Auto Scan, cycle dimmer On/Off 3 times. Dimmer will be recognized.
- Found Dimmer! Press “Next”.
- Dimmer added! Press “Done” at upper left.
- Press the paired Dimmer.
Ready
to configure and use!
BEFORE YOU START
Download GM’s LUXcontrol™ app from the App Store or Google® Play. Or, scan the QR code for auto download. We will guide you through programming after we help you install your dimmer.
KEY SPECIFICATIONS
- Color: White
- Electrical Rating: 100-240V AC
- Rated Current: 3A
- Working Temp: -4°F – 120°F / -20°C – 50°C
- Wi-Fi Frequency: 2.4Ghz only
- Max. Output: 300W INC – 150W LED
SYSTEM REQUIREMENTS
Existing Wi-Fi 2.4GHz Network
Existing single pole circuit and outlet box with neutral wire
Mobile device running IOS® 10.0 or higher, Android™ 8.0 and above GM Lighting
LUXcontrol™ App (see ‘Before You Start’)
DIMMER INSTALLATION
The SHWD is a dimmable LED dimmer that is designed to replace a standard light
switch using existing wiring. The SHWD provides a wide dimming range and is
suitable for multi-gang installations. All dimmers can be controlled via the
LUXcontrol app.
Turn the POWER OFF at the circuit breaker before installing the dimmer. Read
and understand these instructions before installing. This device is intended
for installation pursuant to National Electric Code and local regulations. We
recommend that you use a qualified electrician or electrical contractor to
install. WIRING and PROGRAMMING DIRECTIONS
- Remove existing wall switch (FIG. 1)
- Mount SHWD dimmer so that RE-SET switch is on bottom (FIG. 2)
- Connect the 120V power wire to the BLACK wire on the SHWD dimmer (FIG. 3)
- Connect the neutral wire WHITE to the WHITE wire on the SHWD dimmer (FIG. 3)
- Connect the brown wire to the load wire (light) (FIG. 3)
- Connect GREEN wire on the SHWD dimmer to ground
- Push dimmer into place making sure that wires are securely connected and screw to outlet box (FIG. 4)
- Wall plate clips onto SHWD dimmer, locking securely in place (FIG. 5). Also can accomodate std. Decora plates.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>