GM Lighting LD-XD-UNV LineDRIVE 24VDC Multi Dim LED Power Supplies User Guide
- June 1, 2024
- GM Lighting
Table of Contents
GM Lighting LD-XD-UNV LineDRIVE 24VDC Multi Dim LED Power Supplies
Product Information
Specifications:
- Model: LD-XD-UNV200-24 / LD-XD-UNV300-24
- Dimensions: 9.51L x 6.35W x 1.59H
- Max Output Power: 192W Total / 288W Total
- Outputs: 2 separate channels / 3 separate channels
Product Overview:
The LineDRIVE power supply is an electronic dimmable multi-output driver
that offers stable operation with standard line voltage and low voltage dimmer
controls, making installation easy. It is compatible with Triac, ELV, MLV, and
0-10V dimmers for a wide array of applications, allowing dimming down to 1%.
Features:
- Multi indoor dimmable
- Supports various dimmer types
Usage Instructions
- Installation: Ensure proper wiring according to the provided diagram. Connect input and output leads securely.
- Dimming: Use compatible dimmers (Triac, ELV, MLV, 0-10V) for optimal performance. Minimum dimming level is 1%.
FAQ:
-
Q: Can the LineDRIVE power supply be used in damp locations?
A: Yes, the LineDRIVE power supply is rated for indoor dry and damp locations with an IP20 rating. -
Q: What certifications does the LineDRIVE power supply have?
A: The LineDRIVE power supply is UL listed for US and Canada, complies with UL 8750, CSA C22.2 No 250, and is Title 24 (JA8) certified.
LineDRIVE Power Supply 24VDC Electronic Dimmable
Multi-Output Drivers Specification Sheet
- Project Name
- Type
- Catalog #
- Date
PRODUCT OVERVIEW
Multi-Dim LineDRIVE power supplies offer stable operation with standard line voltage and low voltage dimmer controls to make installation easy. Compatible with Triac, ELV, MLV and 0-10V dimmers for a wide array of applications. Dimming down to 1%.
FEATURES
- Output: Class 2, 24VDC, constant voltage
- Multi-output drivers have 2 or 3 output channels for powering several Class 2 loads from one unit
- Input: 120V / 277V
- Dimmable: Triac, ELV, MLV, 0-10V, PWM dimming
- Minimum dimming: 1%
- Stable operation, flicker-free dimming
- Compatible with typical phase dimmers and 0-10V controls
- Integrated wiring compartments with separate line voltage and low voltage sections
- Line voltage compartment meets NEC code, up to (3) 12 AWG conductors
- Over-current, over-voltage and over-temperature protection
ORDERING INFORMATION
Example : LD-XD-UNV200-24
Specification
SPECIFICATIONS
Model| LD-XD-UNV200-24| LD-XD-UNV300-24
Dimensions| 9.51”L x 6.35”W x 1.59”H| 9.51”L x 6.35”W x 1.59”H
Max output power| (2 channels x 96W) 192W
Total| (3 channels x 96W) 288W Total
Outputs| 2 separate channels| 3 separate channels
Output voltage| 24V| 24V
Output current| (2 channels x 4A Max)| (3 channels x 4A Max)
Open circuit voltage| 25V| 25V
Input voltage range| 120/277VAC ± 10%, 50/60Hz| 120/277VAC ±
10%, 50/60Hz
Max input current| 2.30A @120V, 1.00A@277V| 3.00A @120V,
X.XXA@277V
Power factor (80~100% load)| > 0.90| > 0.90
Efficiency at 120V / 277V| 89% / 91%| 90% / 92%
Loading| Recommended minimum: for best dimming performance: 10% for ELV,
Triac, 0-10V, PWM dimming, 40% for MLV dimming. Maximum: 100%
Dimming|
- Minimum dimming: 1%
- Phase dimming only at 120VAC (Triac, ELV, MLV)
- Low voltage dimming at 120VAC or 277VAC (0-10V, 10V PWM dimming)
THD (80~100% load)| < 20%
Load regulation| ± 5%
Line regulation| ± 5%
Turn-on delay time| < 0.5s
Surge rating| 2.5KV for Combination Wave / Ring Wave
**Protection**|
- Over voltage protection: Hiccup mode. Protection will trigger when load voltage exceed specified output voltage and will auto recover after the fault mode is removed.
- Over current protection: Hiccup mode. Protection will trigger when load current exceed specified output current and will auto recover after the fault mode is removed.
- Short circuit protection: Hiccup mode. Protection will trigger when short circuit and will auto recover after the fault mode is removed.
- Over temperature protection: Protection will trigger when driver overheat and auto-recovery when cooled down.
Certifications / Compliance
|
- UL listed for US and Canada (Complies with UL 8750, CSA C22.2 No 250) UL Class 2 (low voltage output)
- UL type HL (hazardous location, Class I, Division 2) FCC, 47CFR Part 15, Class B (consumer limit)
- Title 24 (JA8) certified
Maximum case temperature| 90°C
Operating temperature| -40°F to 140°F (-40°C to 60°C)
Humidity| 5% to 95%
Life rating| 90,000 hours at 120Vac input, 100% load and 60ºC case
temperature
Application| IP20, indoor dry and damp locations
Cooling| Free air convection
Input leads| 12”, UL 1316/1015 #18AWG (Black, White and Green)
Output leads| 12”, UL 1316 #18AWG (Red and Blue)
Dimming leads| 12”, UL 1316/1430 #22AWG (Purple and Pink)
Case| Black powder coated steel
DIAGRAM
DIMMING CURVES FOR:
- LD-XD-UNV200-24
- LD-XD-UNV300-24
0-10V Dimming Curve (Full load)
Triac Dimming Curve (Full load)
WIRING DIAGRAMS
- The following diagrams are provided as example system designs. Install in accordance with national and local electrical code regulations.
- CAUTION: Do not connect output leads together for drivers with 2 or 3 sets of outputs. Keep each set of output leads separated. See LED load specifications for maximum series run limits. Be sure to match driver output voltage to load voltage.
- Connect with ELV/MLV/Triac Dimmer (120VAC input only)
©2023 GM LIGHTING, LLC • www.gmlighting.net •
Specifications subject to change without notice
18700 Ridgeland Ave., Tinley Park, IL 60477 • Toll-Free:
866-671-0811 FAX:
708-478-2640 •
tech@gmlighting.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>