OJD-83 Magnetic Wireless Charger Stand User Manual
- June 5, 2024
- OJD
Table of Contents
3 IN 1 MAGNETIC WIRELESS CHARGER STAND
USER MANUAL OJD-83
Product Introduction
Thank you for purchasing this product! This product is a 3-in-1 Magnetic Wireless Charger with a magnetic design, suitable for iPhonel2 series mobile phones that support magnetic wireless charging. If you need a protective case, please use the MagSafe mobile phone protective case, which perfectly realizes magnetic wireless charging The top of the product supports iWatch charging, and the back supports AirPodschargng Provide you with a convenient, fast, safe, and free wireless charging experience.
Product Appearance
Product Parameters
Product Name:3 IN 1 MAGNETIC WIRELESS CHARGER STAND
Model : OJD-83
Input: 9V/2A 12v/15A
Output Watch:2W (max)
Output Earphone:3W (max)
Output Phone :5W/75W/10W/15W| Product Size:127’117’71mm
Transmission distance: ≤2MM
Conversion rate: ≥73%
Coil:tr.:white/black
Interface: Type-c
Executive Standard :Qi
---|---
Method Of Application
- Insert the Type{ cable into the QC3.0 adapter and tum on the power supply.
- Place the devices that support wireless charging in the center of the product charging area and start charging.
- In order to enhance the stability of the product, the product is equipped with a removable adhesive, which users can paste on the bottom of the product for use.
| State | LED Indicator |
|---|---|
| Power connected | Blue & green on for is and then off |
| Stand by | / |
| Mobile phone charging | Blue light |
| Earphone Charging | Greenlight |
| Mobile phone and earphones charging at the same time | Blue & green light |
| Watch Charging | / |
| FOD – mobile phone | Blue light flashing |
| FOD – earphone | Greenlight flashing |
| FOD – mobile phone & earphone | Blue & green lights flashing |
Accessory List
3 In 1 Magnetic Wireless Charger Stand1
1M Type-c Ca ble1
User Manual1
Removable Glue2
Matters Needing Attention
- Please use a qualified power adapter, otherwise, it may cause unstable charging.
- Do not put metal debris or magnetic card on the product, it may cause damage to the product or abnormal charging.
Safety Instructions
- Do not pull the power supply hard, to avoid the power cord breaking or falling off
- Do not disassemble the product or put it into fire or water to avoid short circuits and leakage.
- Do not use the product in severe high temperature, humidity, or corrosive environment, to avoid damage to the circuit and leakage phenomenon.
FAQ
Q 1. The phone does not charge.
A: The phone is not aimed at the charging sensing area or the receiving coil
is not installed correctly.
Q 2. Charging fever.
A: It is normal for the receiving coil or transmitter to generate heat during
wireless charging
Q 3. Mobile phone charging intermittently.
A: If the charging current of the PD power adapter is insufficient or the
voltage is unstable, please use a qualified adapter.
A: The charging position is too biased, the electromagnetic induction is not
in place, and the charging position needs to be adjusted.
Q 4. Slow charging.
A: The wireless charging current allowed by the mobile phone itself or the
external receiving coil is different, or the standby power consumption of the
mobile phone is large when charging, it is recommended to reduce the standby
program of the mobile phone.
Q 5. Other questions.
A: Please contact after-sales customer service directly.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>