OJD-31A Fast Wireless Charger Instructions
- June 6, 2024
- OJD
Table of Contents
How to use the wireless charger?
- Connect the type-c USB cable into the port of the charger
- Plug the USB connector into the USB power adapter
- Connect power adapter to power outlet
- Simply place the Qi device on center port of charging pad
LED Indicators Information
-
LED TURN OFF I
Indicates the wireless charger is standby -
GREEN LIGHT I
Indicates the wireless charger is working -
GREEN LIGHT FLASHING
Indicates charging abnormality /FOD (Foreign Object Detection , like Non-Qi devices without receiver or found a metal on wireless charger pad )
Fast Wireless Charger
Specification
Model|
OJD-31A
---|---
Interface| Type-c
Input| 5V/2A 9V/2A 12V/1.5A
Output| 5W/7.5W/10W/15W
Quick Charge| QC3.0/PD
Conversion| ≥72%
Material| ABS
Colour| Black/ White
Size| 99*7mm
Kind Reminder
- In the process of charging, do not put any metal materials like key ring, metallic phone case etc. On the back of phone device or wireless charger directly.
- To achieve best preformance of this wireless charger, QC3.0/PD power adapted.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Including
Fast Wireless Charger x1
1m Type-c USB Cable x1
User Manual x1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>