Shenzhen Ojd Technology OJD-78 Wireless Car Charger User Manual
- June 5, 2024
- Shenzhen Ojd Technology
Table of Contents
Shenzhen Ojd Technology OJD-78 Wireless Car Charger
Specification
| Model | OJD-78 |
|---|---|
| Input | 5V/2A 9V/2A 12V/1.5A |
| Power | 5W/7.5W/10W/15W |
| Product Size | 946426mm |
| Output Port | Type-c |
| Charging Efficiency | 72% |
| Charging Distance | 6mm |
| Material | ABS |
| Color | Black |
Packing List
Wireless Car Charger xl
User Manual xl
1m Type-c Cable xl
Suitable for iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max and new mobile phones that support magnet wireless charging.
Steps For Usage
- Install the air outlet clip on the product and fix it on the air outlet of the automobile air conditioner.
- Connect the Type-C charging cable to the product and the power supply, turn on the power supply and confirm the connection.
- Place iPhonel2 or other models in the same series on the magnetic wireless car charger, and start charging after magnetic suction.
- If the magnetic attraction is out of position, it will cause charging failure, and you need to adjust the position of the phone.
State| Standby| Charging| FOD
---|---|---|---
Indicator light| Red| Blue| Blue flashing
Tip:
- It is recommended to use PD or QC 3.0 adapter.
- Do not disassemble this product at will.
- Do not use this product in a high temperature, humid environment, please stay away from fire and water.
- When using the USB-C power adapter, please make sure that the cable is fully inserted into the power adapter before plugging the adapter into the power outlet.
- When using this product, please do not place metal foreign objects (such as keys, coins, batteries or jewelry) on it, otherwise it will cause abnormal charging or hotness.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
