OJD-QI01 Simple Wireless Charger Instruction Manual

OJD-QI01 Simple Wireless Charger

Specification

• Input
  5V /2A, 9V /2A

• Output
  5W/7.5W/10W/15W

• Quick charge
  QC3.0

• Conversion
  ≥73%

• Material
  ABS

• Colour
  White/ Black
  

Note

1. Please do not disassemble the product at will.
2. Please do not use this product in high temperature, damp environment.
3. To charging contact surface on the back of the mobile phone cannot carry metal materials such as iron sheets ,finger rings, metal protective shells, etc.

Packaging List

Simple Wireless Chargerl
Type-c USB Cable(lm)’l
User Manuall

How To Use The Wireless Charger?

1. Connect the Type-c cable into the port of the charge.
   Plug the USB connector into the QC3.0 power adapter.

2. Connect power adapter to power outlet.
   Place the wireless charging device in the center of the charging area to start charging.

LED Indicators Information

1. Power on: green light is on for ls and then off.
   Standby mode: No light.

2. Charging: green light.

3. FOD/Charging anomaly: green light flashing.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>