VAPORESSO Swag PX80 Electronic Cigarette Battery Kit User Manual
- June 5, 2024
- VAPORESSO
Table of Contents
**VAPORESSO Swag PX80 Electronic Cigarette Battery Kit User Manual
**
EXPLODED VIEW
SPECIFICATIONS
Dimensions: 99.7 x 24.1 x 47.7mm
POD Capacity: 4ml/2ml(TPD)
Coils & Suggested Wattage: GTX 0.2Ω MESH Coil (45-60W)
GTX 0.3Ω MESH Coil (32-45W)
Battery Capacity: Single 18650 Battery
Output Power: 5-80W
Charging Current: DC 5V/2A,Type-C
Battery Display: 0.96’’ TFT Screen
PACKING LIST
- 1 x SWAG PX80 Battery
- 1 x SWAG POD (4ml/2ml TPD)
- 1 x GTX 0.2Ω MESH Coil (In the box)
- 1 x GTX 0.3Ω MESH Coil (In the box)
- 1 x Type-C Cable
- 1 x User Manual
- 1 x Warranty Card
- 1 x Reminder Card
Thank you for choosing Vaporesso product. Please read this instruction carefully before use to ensure a perfect experience. If there is any additional requirement about this product, please consult the local agent or contact us through our website: www.vaporesso.com
USE INSTRUCTION
Install the Coil
Take out the coil from the package of the SWAG PX80, and insert the coil firmly into the POD.
Replace the Coil
- Please confirm the POD is empty before coil replacing.
- Rotate the drip tip so that the triangle mark on it is aligned with the lock mark on the top cap;
- Press down the drip tip to push out the used coil;
- Pull out the used coil and install a new one, ensuring the bottoms both of the coil and pod are aligned. The drip tip will be back in place when replacing finished.
Fill the E-liquid
- Uncover the silicone plug at the bottom of the POD according to the arrow direction;
- Gently insert the e-liquid filling bottle tip to the filling slot and press down to squeeze the e-liquid through the slot.
- Please wait for 5 minutes for the e-liquid to soak into the coil.
Power on the Device
Click the power button 5 times in 2 seconds to power on or power off the device.
Power Adjustment
SWAG PX80 is using the powerful GTX coil platform, and the suggested power need to be noticed before start vaping.
| GTX MESH Coils | GTX 0.2Ω MESH | GTX 0.3Ω MESH |
|---|---|---|
| Suggested Power | 45-60W | 32-45W |
Start Vaping
Press the power button to enjoy extraordinary vaping experience.
Charge the Battery
After connecting the Type-C cable to the battery, the battery indicator and remaining charging time will be showed on the screen.
Settings
SYSTEM LOCK/UNLOCK: Press power button 3 times.
Press “+”and “–” buttons together to enter the setting interface.
SMART VW: The power of device will be adjusted automatically according
to the coils;
VW: Wattage adjustment mode;
VV: Voltage adjustment mode;
PUFF: The 7 days vaping information will be recorded in the puff counter;
DEFAULT: Restore factory settings;
THEME: Theme Color Selection
EXIT: Back to main interface.
PROTECTIONS
| Protections | Situation |
|---|---|
| USB Input Protection | The USB input voltage is too high. |
| Low Battery Protection | The battery drops too low. |
| No Load Protection | The device detects no cartridge on the battery. |
| Short-circuit Protection | The device detects a short-circuit. |
| Overtime Protection | Constantly vape for more than 10 seconds. |
| Overheat Protection | The device detects an overheated PCBA. |
CAUTIONS
- Please turn off the device when it is not in use.
- Do not leave the charging device unattended.
- Do not drop, throw or abuse your device, which may cause damage.
- Please use a standard USB output charger with proper charging current and voltage range.
- Keep away from the water or any flammable gas, liquid.
- Do not expose the device to direct sunlight, dust, moisture or mechanical shock.
- Do not expose the device to extreme temperature. (Recommended temperature range: -10~45℃ /14~113 ℉ while using and -10~45℃ /14~113 ℉ while storing).
- EEE Recycling: The product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
- Battery Recycling: The product battery should not be treated as household waste, instead, it should be handed over to the applicable used battery collection point for recycling.
- Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury may occur.
WARNINGS
This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is an addictive substance and it is not suitable or recommended to use in following cases:
- This device is not suitable for:
- Persons under the legal smoking age.
- Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficult breathing due to bronchitis, emphysema or asthma.
- Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumour of the adrenal gland that can affect blood pressure).
- Persons taking certain medications like Theophylline, Ropinirole or Clozapine and etc..
- This device is not recommended for:
- Non-smokers
- Pregnant or breastfeeding women
- You may experience the following results if you use nicotine containing e-liquid with this product. If it happens, please consult a healthcare professional and show them this leaflet if possible:
- Feeling faint – Nausea – Dizziness – Headache
- Coughing – Irritation of the mouth or throat
- Stomach discomfort – Hiccups
- Nasal congestion – Vomition
- Chest palpitations/pain or an irregular heart rate
This device should not be used by persons under the legal smoking age.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>