VAPORESSO XROS 4 MINI Pod Kit User Manual
- June 1, 2024
- VAPORESSO
Table of Contents
VAPORESSO XROS 4 MINI Pod Kit
Specifications
- Dimensions: 107.5124.0014.12mm
Pod Capacity:
- 3ml (Standard Version)
- 2ml (TPD Version)
- 3ml (0.8 Version)
Resistance
- 0.4 (Standard & 0.8 Versions)
- Battery Capacity: 1000mAh
- Charging: Type-C, 1A
- Display: 1* LED Light Indicator
Product Usage Instructions
-
1. **Install & Replace the Pod:** Pull out the pod from the battery and install the new one. If it’s the first time using the device, please tear off the sticker of the preinstalled pod.
- Fill the E-liquid: Snap off the mouthpiece then squeeze the e-liquid through filling hole. After filling, put the mouthpiece back and make sure it’s shut firmly. If it’s the first time filling the e-liquid, please wait 5 minutes for the coil to prime.
- Adjust Airflow: There is an airflow control toggle on the back of the battery. Adjust the toggle according to your vaping habits for different airflow effects.
- Start Vaping: The device is draw-activated. Inhale through the mouthpiece and exhale to start vaping.
- Check the Battery Level: The LED indicator will stay in green/blue/red color to show the battery level after vaping or inserting the pod.
Battery Level | LED Color |
---|---|
70%~100% | Green |
30%~70% | Blue |
0~30% | Red |
Charging: Please use the in-box Type-C cable to charge the device. The LED indicates the current battery power breathily while charging, and stay in green while fully charged.
Frequently Asked Questions (FAQ)
Q: Can I use any type of e-liquid with this device?
A: This refillable electronic cigarette is intended for use with compatible
e-liquid, which may contain nicotine.
USER MANUAL
VAPORESSO XROS 4 MINI
Thank you for choosing VAPORESSO product. Please read this instruction carefully before use to ensure a perfect experience. If there is any additional requirement about this product, please consult the local agent or contact us through our website: www.vaporesso.com
ENLARGED VIEW
SPECIFICATION
SPECIFICATIONS| 3ml Version| 2ML Version(TPD)| 0.8Ω
Version
---|---|---|---
Dimensions| 107.5124.0014.12mm
Pod Capacity| 3ml| 2ml(TPD)| 3ml
Resistance:| 0.4Ω| 0.4Ω| 0.8Ω
Battery Capacity| 1000mAh
Charging| Type-C, 1A
Display| 1* LED Light Indicator
FIGURE 1
FIGURE 2
USE INSTRUCTIONS
-
Install & Replace the Pod
Pull out the pod from the battery and install the new one.
*If it’s the first time using the device, please tear off the sticker of the preinstalled pod. -
Fill the E-liquid(Refer to FIGURE1)
Snap off the mouthpiece then squeeze the e-liquid through filling hole. After filling, put the mouthpiece back and make sure it’s shut firmly.
*If it’s the first time filling the e-liquid, please wait 5 minutes for the coil to prime. -
Adjust Airflow(Refer to FIGURE2)
There is an airflow control toggle on the back of the battery. Adjust the toggle according to your vaping habits for different airflow effects. -
Start Vaping
The device is draw-activated. Inhale through the mouthpiece and exhale to start vaping. -
Check the Battery Level
The LED indicator will stay in green/blue/red color to show the battery level after vaping or inserting the pod.
Battery Level | LED Color |
---|---|
70%~100% | Green |
30%~70% | Blue |
0~30% | Red |
Charging
Please use the in-box Type-C cable to charge the device. The LED indicates the
current battery power breathily while charging, and stay in green while fully
charged.
PROTECTIONS
- Low Resistance/Short-circuit: The red indicator will flash 5 times and the device will stop working.
- High Temperature: The red LED flashes 3 times and then goes out for 1 second, then flashes 3 times, and the device will stop working.
- No Load/High Resistance: The current battery level indicator will flash 4 times and the device will stop working.
- Low Voltage/Over Discharging: The red indicator will flash 3 times and the device will stop working.
- Over Charging: The green indicator will stay on and the device will stop charging.
- Overtimes(8s): The device will stop working and the current power indicator LED will flash 4 times, then breathe once and then LED go out.
CAUTIONS
- Please turn off the device when it is not in use.
- Do not leave the charging device unattended.
- Do not drop, throw or abuse your device, which may cause damage.
- Please use a standard USB output charger with proper charging current and voltage range.
- Keep away from the water or any flammable gas, liquid.
- Do not expose the device to direct sunlight, dust, moisture or mechanical shock.
- Do not expose the device to extreme temperature. (Recommended temperature range: 10~40℃ using and 10~40℃ while storing).
- EEE Recycling: the product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
- Battery Recycling: the product battery should not be treated as household waste, instead, it should be handed over to the applicable used battery collection point for recycling.
- Only have your device repaired by VAPORESSO. Do not attempt to repair it by yourself as damage or personal injury may occur.
WARNINGS
This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is an addictive substance and it is not suitable or recommended to use in following cases:
- This device is not suitable for:
- Persons under the legal smoking age.
- Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficult breathing due to bronchitis, emphysema orasthma.
- Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumour of the adrenal gland that can effect blood pressure).
- Persons taking certain medications like Theophylline, Ropinirole or Clozapine and etc.
- This device is not recommended for:
- Non-smokers
- Pregnant or breastfeeding women
- You may experience the following results if you use nicotine-containing e-liquid with this product. If it happens, please consult a healthcare professional and show them this leaflet if possible:
Feeling faint / Nausea / Dizziness / Headache / Coughing / Irritation of the mouth or throat / Stomach discomfort / Hiccups / Nasal congestion / Vomition / Chest palpitations / pain or an irregular heart rate.
This device should not be used by persons under the legal smoking age.
LASER ANTI-COUNTERFEITING LABEL INSTRUCTIONS
Please keep the anti-counterfeiting code on the packaging for after-sale service.
-
STEP 1 Check the label
Flip the label under light with different angle, you will see the letter “V” position change. -
STEP 2 Verify the QR code
-
Scratch
-
Scan QR code to verify.
WARRANTY STATEMENT
Limited 90-Day Warranty Terms
Warranty Period
VAPORESSO offers a limited 90-day warranty. The warranty period is 90 days
from the date of purchase. If you want to claim a warranty for your device,
please keep valid proofs of the date of purchase, such as invoices/receipts.
If there are no valid evidences to refer to, the start time of the warranty
period will be calculated from the date of manufacture of the device.
Terms of Warranty
For safety and hygiene reasons, please note that the following items or
situations will NOT covered under warranty:
-
The following opened or used items will not be returned, including e-liquids, cartridges, coils, drip tips, tanks, atomizers and rechargeable batteries.
-
Under no circumstances will we accept returns and no refunds will be given if a
non-defective item has been opened and used. -
Product problems caused by human damages and misuse will not be covered by the warranty.
-
Any hardware-cracked, dismantled or modified product is not covered under warranty.
-
If the product happens to be faulty at the time of arriving, please inform us immediately prior to using it.
Except for the Limited 90-Day Warranty Terms, Vaporesso expressly disclaims all implied warranties of any kind with respect to this product, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose and all warranties provided by statute, Warranty claims will expire 90 days after the end user purchases the device.
For more information, please visit our website at www.vaporesso.com
Warranty Claim Procedure
- Please kindly contact the seller you purchased the product from for repair or replacement.
- Alternatively, if you have any product related question, you can
scan the QR code on the back cover.
Information Needed for 90-Day Limited Warranty Claim
- Proof of purchase
- Product name and quantity
- Batch number (VSGXXXX) and Security code (With pictures)
- Descriptions on the product problem
- Videos or pictures that reflect product problem
Notes
- It usually takes 5-10 days to verify all submitted warranty claim information. Please wait patiently.
- Once the requested warranty claim information is confirmed and approved, we will arrange a replacement for you. Please kindly note that if the original replacement product is out of stock or discontinued, we will tship an item of equal value to you with your consent.
- VAPORESSO reserves the right of final interpretation of the warranty claim service
Please keep the warranty card for the after-sale service. Warranty will be disqualified if the warranty card is lost.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>