VAPORESSO XROS3 Mini Pod Best Kit User Manual

VAPORESSO XROS3 Mini Pod Best Kit

Product Information

• Specifications:
  • Dimensions: 27.8 x 24.9 x 72mm
  • Pod Capacity: 2ml
  • Resistance: 0.8/1.2
  • Battery Capacity: 900mAh
  • Charging: Type-C, 1A

Product Usage Instructions

• Install & Replace the Pod
  • Pull out the pod from the battery and install the new one.
  • If it’s the first time using the device, please tear off the sticker of the pre-installed pod.
• Fill the E-Liquid
  • Refer to FIGURE 1. Snap off the mouthpiece then squeeze the e-liquid through the filling slot.
  • After filling, put the mouthpiece back and make sure it’s shut firmly. If it’s the first time filling the e-liquid, please wait 5 minutes for the coil to prime.
• Adjust Airflow
  • Refer to FIGURE 2. There is an airflow control toggle on the bottom of the battery.
  • Adjust the toggle according to your vaping habits for different airflow effects.
• Start Vaping
  • The device is draw-activated. Inhale through the mouthpiece and exhale to start vaping.
• Check the Battery Level
  • The LED indicator will stay in green/blue/red color to show the battery level after vaping or inserting the pod.
  • Battery Level /LED Color
  • 70%~100% Green
  • 30%~70% Blue
  • 0~30% Red
• Charging
  • Please use the in-box Type-C cable to charge the device. The LED indicator will stay green while fully charged.

FAQs

• Q: Can this device be used by minors?
  • A: No, this device should not be used by persons under the legal smoking age.
• Q: What should I do if my device is exposed to extreme temperatures?
  • A: Do not expose the device to extreme temperatures. Recommended temperature range: -10~60°C (14~140°F) while using and -10~45°C (14~113°F) while storing.

Thank you for choosing the Vaporesso product. Please read this instruction carefully before use to ensure a perfect experience. If there is any additional requirement about this product, please consult the local agent or contact us through our website: www.vaporesso.com.

ENLARGED VIEW

SPECIFICATION

• Dimensions: 27.8 x 24.9 x 72mm
• Pod Capacity: 2ml
• Resistance: 0.8Ω/1.2Ω
• Battery Capacity: 900mAh
• Charging: Type-C, 1A

FIGURE 1

FIGURE 2

USER INSTRUCTIONS

1. Install & Replace the Pod
   • Pull out the pod from the battery and install the new one.
   • If it’s the first time using the device, please tear off the sticker of the pre-installed pod.
2. Fill the E-liquid（Refer to FIGURE 1）
   • Snap off the mouthpiece then squeeze the e-liquid through the filling slot. After filling, put the mouthpiece back and make sure it’s shut firmly.
   • If it’s the first time filling the e-liquid, please wait 5 minutes for the coil to prime.
3. Adjust Airflow（Refer to FIGURE 2）
   • There is an airflow control toggle on the bottom of the battery. Adjust the toggle according to your vaping habits for different airflow effects.
4. Start Vaping
   • The device is draw-activated. Inhale through the mouthpiece and exhale to start vaping.
5. Check the Battery Level
   • The LED indicator will stay in green/blue/red color to show the battery level after vaping or inserting the pod.
     Battery Level| LED Color
     ---|---
     70%~100%| Green
     30%~70%| Blue
     0~30%| Red
6. Charging
   • Please use the in-box Type-C cable to charge the device.
   • The LED indicator will stay in green while fully charged.

PROTECTIONS

• Low Resistance/Short-circuit/High Temperature: The red indicator will flash 5 times and the device will stop working.
• No Load/High Resistance: The current battery level indicator will flash 4 times and the device will stop working.
• Low Voltage/Over Discharging: The red indicator will flash 3 times and the device will stop working.
• Over Charging: The green indicator will stay on and the device will stop charging.
• Overtimes(8s): The device will stop working and the LED indicator will flash in green-blue-red.

CAUTIONS

1. Do not leave the charging device unattended.
2. Do not drop, throw, or abuse your device, which may cause damage.
3. Please use a standard USB output charger with a proper charging current and voltage range.
4. Keep away from the water or any flammable gas, or liquid.
5. Do not expose the device to direct sunlight, dust, moisture, or mechanical shock.
6. Do not expose the device to extreme temperatures.
   • ( Recommended temperature range: -10~60℃ /14~140 ℉ while using and -10~45℃ /14~113 ℉ while storing).
7. EEE Recycling: the product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
8. Battery Recycling: the product battery should not be treated as household waste, instead, it should be handed over to the applicable used battery collection point for recycling.
9. Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury may occur.

WARNING

This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is an addictive substance and it is not suitable or recommended for use in the following cases:

1. This device is not suitable for:
   • Persons under the legal smoking age.
   • Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease, or difficulty breathing due to bronchitis，emphysema orasthma.
   • Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumor of the adrenal gland that can affect blood pressure).
   • Persons taking certain medications like Theophylline, Ropinirole Clozapine, etc.
2. This device is not recommended for：
   • Non-smokers
   • Pregnant or breastfeeding women
3. You may experience the following results if you use nicotine-containing e-liquid with this product.
   • If it happens, please consult a healthcare professional and show them this leaflet if possible:
   • Feeling faint / Nausea / Dizziness / Headache / Coughing / Irritation of the mouth or throat / Stomach discomfort / Hiccups / Nasal congestion / Vomition / Chest palpitations/pain or an irregular heart rate.
   • This device should not be used by persons under the legal smoking age.

Warranty Claim Procedure

• Warranty Claim Procedure

1. Please kindly contact the seller you purchased the product from for repair or replacement.
2. Alternatively, if you have any product-related questions, you can scan the QR code below.![VAPORESSO-XROS-3-Mini-Pod-Best-Kit-FIG-1 \(4\)](https://manuals.plus/wp-content/uploads/2024/03/VAPORESSO-XROS-3-Mini-Pod-Best-Kit-FIG-1-4.png)

Information Needed for 90-Day Limited Warranty Claim:

1. Proof of purchase
2. Product name and quantity
3. Batch number (VSGXXXX) and Security code (With pictures)
4. Descriptions of the product problem
5. Videos or pictures that reflect product problem

Notes

1. It usually takes 5-10 days to verify all submitted warranty claim information. Please wait patiently.
2. Once the requested warranty claim information is confirmed and approved, we will arrange a replacement for you. Please kindly note that if the original replacement product is out of stock or discontinued, we will ship an item of equal value to you with your consent.
3. VAPORESSO reserves the right of final interpretation of the warranty claim service.

Purchase Information

• Product Model: Date of Purchase
• (Based on the date from receipt of purchase): Month Day Year

Store Information:

• Store Name:
• Phone:
• Store Address:
• City:
• Country:
• Post Code:

Customer Information:

• Customer Name:
• Phone:
• Customer Address:
• City:
• Country:

LABEL INSTRUCTIONS

LASER ANTI-COUNTERFEITING LABEL INSTRUCTIONS

Please keep the anti-counterfeiting code on the packaging for aftersale service.

• STEP 1 Check the label
  • Flip the label under the light with a different angle, you will see the letter “V” position change.
• STEP 2 Verify the QR code

1. Scratch
2. Scan the QR code to verify.

For more information please consult our website at www.vaporesso.com or email us at support@vaporesso.com.

• Please keep the warranty card for the after-sale service.
• The warranty will be disqualified if the warranty card is lost.

LIMITED WARRANTY CARD

Limited 90-Day Warranty Terms

VAPORESSO will provide repair or replacement to the original purchaser of this product under warranty according to the following terms and conditions:

1. This warranty covers any defects in materials or workmanship in this product if a claim is submitted to VAPORESSO within 90 days of purchase by the end user.
2. This warranty may be disqualified as a result of the following circumstances:
   • the customer does not provide this warranty card and the original receipt of purchase.
   • merchandise failure or damage is caused by improper use or unauthorized adjustments.
   • merchandise failure or damage as a result of excessive force or impact and non-recommended operating conditions (see user manual).
   • merchandise failure or damage caused by exposure to water or other conducting liquids.
   • merchandise failure or damage caused by use with non-VAPORESSO brand components or recommended e-liquids.
3. In no event will VAPORESSO be liable for any SPECIAL or CONSEQUENTIAL damages arising from the use of this product, nor for injury to any person, or any claim for damages arising from the use of this product.

Except as expressly provided in this Limited Warranty, VAPORESSO expressly disclaims all implied warranties for this product of any kind whatsoever, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose and all warranties imposed by statute, after the expiration of 90 days after purchase by the end user.

Scan the QR code for more languages:www.vaporesso.com.

References

• VAPORESSO » Premium Brand Vape Manufacturer
• VAPORESSO » Premium Brand Vape Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>