CalAmp LMU-330 GPS Vehicle Tracker Installation Guide
- June 3, 2024
- CalAmp
Table of Contents
CalAmp LMU-330 GPS Vehicle Tracker
A Robust Vehicle Tracker with A Compact Size, Essential I/O Capability, Built for Simple and Discrete Installation The LMU-330™ is an economical, low powered vehicle tracking device designed for inexpensive and hidden installation. An ideal solution for stolen vehicle recovery, auto rental and other automotive track and trace applications, the LMU-330 utilizes CalAmp’s PEG™ engine coupled with essential I/O capability to deliver accurate data about vehicle location and status.
LMU-330™ Technical Specifications
Cellular/Network
Americas Variant
HSPA/UMTS: 850 (V)/1900 (II) MHz
GSM/GPRS: 850/1900MHz
Global Variant
GSM/GPRS: 850/900/1800/1900 MHz
Data Support
SMS, GPRS, UDP Packet Data
Satellite Location (GNSS)
- Constellation Support: Hybrid GPS, GLONASS, SBAS Engine (WAAS, EGNOS, MSAS)
- Channels: 56 Channel
- Tracking Sensitivity: 162 dBm
- Acquisition Sensitivity: 148 dBm
- Location Accuracy: ~2.0m CEP Open Sky (SBAS 24 hours static)
- Location Update Rate: Up to 4 Hz
Comprehensive I/O
- Digital Inputs: Up to 2 fixed bias
- Digital Outputs: Up to 2 optional open collector (150 mA)
- Accelerometer: Built-in, triple-axis (motion sensing, tilt detection)
- Analog Inputs: 1 internal VCC monitor
- Status LEDs: 2 (GPS, cellular)
Certifications
- Industry Certifications: FCC, CE, IC, PTCRB, RoHS
Cloud/Software Services¹
- PULS™: Monitor, manage, upgrade firmware, configure and troubleshoot devices remotely
- CTC: Device data stream via RESTful APIs
Edge Intelligence¹
- PEG™: Behavioral Scripting (8-bit support)
Electrical
- Operating Voltage: 12/24 VDC Vehicle Systems 9-32 VDC (start-up, operating) 7-32 VDC (momentary)
- Power Consumption: Typical <2mA @ 12V (deep sleep) Typical <10mA @ 12/24V (radio-active sleep) Typical <20mA @ 12V (radio-active) Typical <60mA @ 12V (continuous transmit)
Environmental
- Temperature: – 30° to +70° C (connected to primary power) – 40° to +80° C (storage)
- Humidity: 95% RH @ 50° C non-condensing
- Shock and Vibration: U.S. Military Standards 202G, 801G, SAEJ1455
- ESD: SAE J1113, FCC-Part 15B
Physical/Design
- Dimensions: 1.84 x 3.3 x 0.78” (46.5 x 83.6 x 19.4 mm) (without harness)
- Weight: 3.1 oz. (87 g) (with harness)
Connectors/SIM Access
- Connection Type: Captive wire harness in 2 wire, 4 wire, 6 wire configurations
- GPS Antenna: Internal
- Cellular Antenna: Internal
- Internal: Internal (2FF SIM)
Internal (2FF SIM)
- 200 mAh or 1000 mAh backup battery
- Starter interrupt harness
- ODB-II harness
¹ Subscription service enabled. Contact sales rep for additional details.
CALIFORNIA PROPOSITION 65
WARNING: This product can expose you to chemicals including Carbon black and Nickel, which are known to the State of California to cause cancer, and including Bisphenol A and 1,3-Butadiene, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
L330Q319DS V2
© 2020 CalAmp. All specifications are typical and subject to change without
notice. ¹ Subscription service enabled. Contact sales rep for additional
details.
CalAmp
15635 Alton Pkwy Ste 250
Irvine, CA 92618
888.3CALAMP calamp.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>