VAPORESSO XROS 4 Pod System Kit User Manual

: June 1, 2024
: VAPORESSO

Table of Contents

VAPORESSO XROS 4 Pod System Kit
Product Usage Instructions
ENLARGED VIEW
SPECIFICATION
USE INSTRUCTIONS
PROTECTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VAPORESSO XROS 4 Pod System Kit

VAPORESSO-XROS-4-Pod-System-Kit-PRODUCT-IMAGE

Specifications:

Dimensions: 120.824.014.0mm
Pod Capacity: 3ml / 2ml (TPD) / 3ml
Resistance: 0.4/0.8 / 0.4/0.8 / 0.6/0.8
Battery Capacity: 1000mAh
Charging: Type-C, 2A
Display: 1 Mode Indicator, 1 Power Indicator, 1* Lock Indicator

Product Usage Instructions

Install & Replace the Pod
Pull out the pod from the battery and install the new one. If it’s the first time using the device, please tear off the sticker of the preinstalled pod.
Fill the E-liquid
Snap off the mouthpiece then squeeze the e-liquid through filling hole. After filling, put the mouthpiece back and make sure it’s shut firmly. If it’s the first time filling the e-liquid, please wait 5 minutes for the coil to prime.
Adjust Airflow
There is an airflow control toggle on the back of the battery. Adjust the toggle according to your vaping habits for different airflow effects.
Power ON/OFF
Click the power button 5 times in 2 seconds to power on or power off the device.
Start Vaping
The device is both button-activated and draw-activated. Press the power button or inhale directly through the mouthpiece and exhale to start vaping. The LED indicator will flash in green/blue/red color according to the power status during vaping.
Check the Battery Level
The LED indicator will stay in green/blue/red color to show the battery level after vaping or inserting the pod.
Charging
Please use the in-box Type-C cable to charge the device. The LED Indicator will display the color corresponding to the current battery level while charging and stay in green while fully charged.
Lock Button
Click the power button 4 times in 2 seconds to lock the power button, and the Power ON/OFF function still works.
Mode Settings
Click the power button 3 times in 2 seconds to enter the mode setting interface, then click the power button to adjust the mode, wait 3 seconds to save the current status and exit.

Frequently Asked Questions (FAQ):

Q: What should I do if the device stops working and the red indicator flashes 5 times?
A: The device has encountered a low resistance/short-circuit/high-temperature issue. Please stop using it immediately and contact customer support for assistance.
Q: How can I lock the device?
A: To lock the device, click the power button 4 times in 2 seconds. The Power ON/OFF function will still work while the device is locked.
Q: How do I adjust the airflow for different vaping experiences?
A: Simply adjust the airflow control toggle on the back of the battery according to your vaping habits to achieve different airflow effects.

USER MANUAL
VAPORESSO XROS 4

Thank you for choosing VAPORESSO product. Please read this instruction carefully before use to ensure a perfect experience.
If there is any additional requirement about this product, please consult the local agent or contact us through our website: www.vaporesso.com

ENLARGED VIEW

$VAPORESSO-XROS-4-Pod-System-Kit- $1$$

SPECIFICATION

SPECIFICATIONS| 3ml/0.4Ω Version| 2ML Version(TPD)| 3ML/0.6Ω Version
---|---|---|---
Dimensions| 120.824.014.0mm
Pod Capacity| 3ml| 2ml(TPD)| 3ml
Resistance:| 0.4Ω/0.8Ω| 0.4Ω/0.8Ω| 0.6Ω/0.8Ω
Battery Capacity| 1000mAh
Charging| Type-C, 2A
Display| 1 Mode Indicator, 1 Power Indicator, 1*Lock Indicator

USE INSTRUCTIONS

Install & Replace the Pod
Pull out the pod from the battery and install the new one.
- *If it’s the first time using the device, please tear off the sticker of the preinstalled pod.
Fill the E-liquid(Refer to FIGURE1)
Snap off the mouthpiece then squeeze the e-liquid through filling hole. After filling, put the mouthpiece back and make sure it’s shut firmly.
- If it’s the first time filling the e-liquid, please wait 5 minutes for the coil to prime. $VAPORESSO-XROS-4-Pod-System-Kit- $2$$
Adjust Airflow(Refer to FIGURE2)
There is an airflow control toggle on the back of the battery. Adjust the toggle according to your vaping habits for different airflow effects.
Power ON/OFF
Click the power button 5 times in 2 seconds to power on or power off the device.
Start Vaping
The device is both button-activated and draw-activated. Press the power button or inhale directly through the mouthpiece and exhale to start vaping. The LED indicator will flash in green/blue/red color according to the power status during vaping.
Check the Battery Level
The LED indicator will stay in green/blue/red color to show the battery level after vaping or inserting the pod. $VAPORESSO-XROS-4-Pod-System- Kit-$6$$
Charging
Please use the in-box Type-C cable to charge the device. The LED Indicator will display the color corresponding to the current battery level while charging and stay in green while fully charged.
Lock Button
Click the power button 4 times in 2 seconds to lock the power button, and the Power ON/OFF function still works.
Mode Settings
Click the power button 3 times in 2 seconds to enter the mode setting interface, then click the power button to adjust the mode, wait 3 seconds to save the current status and exit.

PROTECTIONS

Low Resistance/Short-circuit/High Temperature: The red indicator will flash 5 times and the device will stop working.
No Load/High Resistance: The current battery level indicator will flash 5 times and the device will stop working.
Low Voltage/Over Discharging: The red indicator will flash 3 times and the device will stop working.
Over Charging: The green indicator will stay on and the device will stop charging.
Overtimes(8s): The device will stop working and the LED indicator will flash 5 times in the color corresponding to the current battery level.

CAUTIONS

Please turn off the device when it is not in use.
Do not leave the charging device unattended.
Do not drop, throw or abuse your device, which may cause damage.
Please use a standard USB output charger with proper charging current and voltage range.
Keep away from the water or any flammable gas, liquid.
Do not expose the device to direct sunlight, dust, moisture or mechanical shock.
Do not expose the device to extreme temperature. (Recommended temperature range: 10~40℃ using and 10~40℃ while storing).
EEE Recycling: the product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Battery Recycling: the product battery should not be treated as household waste, instead, it should be handed over to the applicable used battery collection point for recycling.
Only have your device repaired by VAPORESSO. Do not attempt to repair it by yourself as damage or personal injury may occur.

WARNINGS

This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is an addictive substance and it is not suitable or recommended to use in following cases:

This device is not suitable for:
- Persons under the legal smoking age.
- Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficult breathing due to bronchitis, emphysema or asthma.
- Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumour of the adrenal gland that can effect blood pressure).
- Persons taking certain medications like Theophylline, Ropinirole or Clozapine and etc.
This device is not recommended for:
- Non-smokers
- Pregnant or breastfeeding women
You may experience the following results if you use nicotine containing e-liquid with this product. If it happens, please consult a healthcare professional and show them this leaflet if possible:
- Feeling faint / Nausea / Dizziness / Headache / Coughing / Irritation of
  the mouth or throat / Stomach discomfort / Hiccups / Nasal congestion / Vomition / Chest palpitations/pain or an irregular heart rate.
- This device should not be used by persons under the legal smoking age.