VAPORESSO GEN-FIT-40 2000mAh Box Kit User Guide

USER GUIDE
VAPORESSO GEN FIT 40

Thank you for choosing the Vaporesso product. Please read this instruction carefully before use to ensure a perfect experience.
If there is any additional requirement about this product, please consult the local agent or contact us through our website: www.vaporesso.com

ENLARGED VIEW

SPECIFICATIONS

GEN FIT 40 MOD

Dimensions| 69.78 x 22.53 x 32.25mm
Resistance Range| 0.3-1.2Ω
Output Power| 5-40W
Output Voltage| 0-4V
Charging Current| DC 5V/2A, Type-C
Display| 0.42″ OLED Screen
Battery Capacity| Built-in 2000mAh
Tank Connection| 510 Thread
INK X

Dimensions| Φ20 x 52.5 mm
Capacity| 3.5ml / 2ml
Coils| GTX 0.6Ω MESH Coil (12-26W)
GTX 1.2Ω Regular Coil (8-12W)

FIGURE

FIGURE 1

FIGURE 2

USER INSTRUCTIONS

1. Install the Tank
   Install the tank to the battery by screwing the 510 thread.
   Make sure they are firmly connected.

2. Replace the Coil (Refer to FIGURE 1)
   – Unscrew the thread base from the tank;
   – Pull out the used coil in the tank;
   – Install a new coil to the tank;
   – Reattach the thread base into place.

3. Fill the E-liquid (Refer to FIGURE 2)
   – Push the top cap according to the arrow direction;
   – fill e-liquid through the hole, then lock the top cap in place after the filling is finished.
   – Please wait 5 minutes for the e-liquid to soak into the coil completely.

4. Adjust the Airflow
   To adjust the airflow volume, please rotate the air-inlet ring on the bottom of the tank.

5. System Operating
   (1) Power on/off: press the power button 5 times in 2s. (2) Lock/unlock the Buttons: press the power button 3 times continuously to lock or unlock the “+” button and “2 buttons. (3) Start Vaping: press and hold the power button to start vaping. For your safety, please do not vape for more than 10 seconds at a time.
   (4) Adjust the Power press the “+” button or the “2 buttons to adjust the power. (5) Flip the Screen: press the power button and “+” buttons simultaneously to flip the screen 180°.
   (6) System Setting: press the “+” button and “2 buttons simultaneously to enter the system setting interface, which includes VV, VW, SMART VW, and DEFAULT.

| SMART VW: select “SMART VW” and press the power button to enter the ON/OFF setting.
---|---
VW: select “VW” and press the power button to enter VW mode.
VV: select “VV” and press the power button to enter W mode.
DEFAULT: select “DEFAULT”, and “YES” and press the power button to restore the factory setting.

PROTECTIONS

1. Overtime Protection: the device will stop working if you vape for more than 10 seconds at a time, and “OVER TIME” will show on the screen.
2. No-load Protection: when there is no tank detected, the device will stop working, and “CHECK ATOMIZER” will show on the screen.
3. Short-circuit Protection: When a short circuit is detected, the device will stop working, and “SHORT ATOMIZER” will show on the screen.
4. Low Voltage Protection: when the battery voltage is too low to start vaping, the device can not be operated, and “LOW BATTERY” will show on the screen.
5. Over-Discharge Protection: when the battery voltage is extremely low during vaping, the device will stop working.
6. Over Charge Protection: the device will stop charging when it is fully charged.
7. USB Input Protection: when the USB detects an input voltage exceeding the rated voltage, the device will stop charging.

CAUTIONS

1. Please turn off the device when it is not in use.

2. Do not leave the charging device unattended.

3. Do not drop, throw or abuse your device, which may cause damage.

4. Please use a standard USB output charger with a proper charging current and voltage range.

5. Keep away from the water or any flammable gas, liquid.

6. Do not expose the device to direct sunlight, dust, moisture, or mechanical shock.

7. Do not expose the device to extreme temperatures.
   (Recommended temperature range: -10~60℃ /14~140℉ while using and -10~45℃ /14~113℉ while storing).

8. EEE Recycling: the product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

9. Battery Recycling: the product battery should not be treated as household waste, instead, it should be handed over to the application used battery collection point for recycling.

10. Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury may occur.

WARNING

This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine.
Nicotine is an addictive substance and it is not suitable or recommended to use in the following cases:

1. This device is not suitable for:
   – Persons under the legal smoking age.
   – Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease, or difficult breathing due to bronchitis, emphysema, or asthma.
   – Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumor of the adrenal gland that can affect blood pressure).
   – Persons taking certain medications like Theophylline, Ropinirole or Clozapine and etc.

2. This device is not recommended for:
   – Non-smokers
   – Pregnant or breastfeeding women

3. You may experience the following results if you use nicotine-containing e-liquid with this product. If it happens, please consult a healthcare professional and show them this leaflet if possible:
   Feeling faint/Nausea /Dizziness/Headache /Coughing/ Irritation of the mouth or throat/Stomach iscomfort/ Hiccups/Nasal congestion/Vomition/ Chest palpitations/pain or an irregular heart rate

This device should not be used by persons under the legal smoking age.

LASER ANTI-COUNTERFEITING LABEL

INSTRUCTIONS

Please keep the anti-counterfeiting code on the packaging for after-sale service.

STEP 1 Check the label

Flip the label under light with a different angle, you will see the letter “V” position change.

STEP 2 Verify the QR code

1. Scratch
2. Scan QR code to verify.

Notice: All new products released after March 2022 will use the new VAPORESSO LOGO.
Any questions, please contact marketing@vaporesso.com
Official Website: www.vaporesso.com

LIMITED WARRANTY CARD

Limited 90-Day Warranty Terms
Vaporesso will provide repair or replacement to the original purchaser of this product under warranty according to the following terms and conditions:

1. This warranty covers any defects in materials or workmanship in this product if a claim is submitted to Vaporesso within 90 days of purchase by the end-user.

2. This warranty may be disqualified as a result of the following circumstances:
   ► the customer does not provide this warranty card and the original receipt of purchase.
   ► merchandise failure or damage is caused by improper use or unauthorized adjustments.
   ► merchandise failure or damage as a result of excessive force or impact and non-recommended operating conditions (see user manual).
   ► merchandise failure or damage caused by exposure to water or other conducting liquids.
   ► merchandise failure or damage caused by use with non-Vaporesso brand components or recommended e-liquids.

3. In no event will Vaporesso be liable for any SPECIAL or CONSEQUENTIAL damages arising from the use of this product, nor for injury to any person, or any claim for
   damages arising from the use of this product.
   Except as expressly provided in this Limited Warranty, Vaporesso expressly disclaims all implied warranties for this product of any kind whatsoever, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose and all warranties imposed by statute, after the expiration of 90 days after purchase by the end-user.

For more information please consult our website at www.vaporesso.com or email us at upport@vaporesso.com
Please remain the warranty card for the after-sale service. The warranty will be disqualified if the warranty card is lost.

Warranty Claim Procedure

1. Submit Process
   Send the Purchase Information by E-mail to VAPORESSO Customer Service: support@vaporesso.com to claim the product faults.
   *Refer to the Purchase Information form.

2. Evaluation Process
   Vaporetto Customer Service will evaluate the information after receiving the E-mail. If VAPOREESO Customer Service determines that the product does need repair or replacement, please ship the product to the below address:
   Shenzhen Smoore Technology Limited Building 8, Dongcai Industrial Park, Gushu Town, Baoan District, Shenzhen, China 518102

3. Repair and Replacement Process
   After receiving the defective product, Vaporesso at its option will repair or replace the product or any component of the product found to be defective during this warranty period.

Purchase Information

Product Model:
Date of Purchase(Based on the date from receipt of purchase): Month Day Year
Store Information:
Store Name:
Phone:
Store Address:
City:
Country:
Post Code:
Customer Information:
Customer Name:
Phone:
Customer Address:
City:
Country:___

www.vaporesso.com

References

• VAPORESSO » Premium Brand Vape Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>