VAPORESSO LUXE X2 Pod Vape Kit User Manual
- June 1, 2024
- VAPORESSO
Table of Contents
VAPORESSO LUXE X2 Pod Vape Kit
Product Information
- Specifications:
- Dimensions: 101 x 31.4 x 21.5 mm
- POD Capacity: 5ml/2ml(TPD)
- POD Resistance:
- LUXE X Series 0.6 Mesh POD
- LUXE X Series 0.8 Mesh POD
- Battery Capacity: 2000mAh
- Output Power: 40W MAX
- Charging Current: DC 5V/1.5A, Type-C
- Display: LED Indicator
Product Usage Instructions
-
1. **Install & Replace the Pod:** Pull out the
pod from the battery and install the new one. If it’s the first
time using the device, please tear off the sticker of the
preinstalled pod. -
Fill the E-liquid:
* Take out the used POD from the battery and pull out the
silicone plug from the bottom of the POD.
* Fill e-liquid through the hole.
* Put the silicone plug back in place firmly after the filling is
finished. If it’s the first time filling the e-liquid, please wait
5 minutes for the coil to prime.
3. **Adjust Airflow:** There is an airflow control
toggle on the side of the battery. Adjust the toggle according to
your vaping habits for different airflow effects.
4. **Power ON/OFF:** Click the power button 5 times
in 2 seconds to power on or power off the device.
5. **Start Vaping:** Press the power button to enjoy
an extraordinary vaping experience.
6. **Check the Battery Level:**
* * The LED indicator will stay in green/blue/red colour to show the
battery level after vaping or inserting the pod.
* **Battery Level**
LED Color | Battery Level |
---|---|
Green | 70%~100% |
Blue | 30%~70% |
Red | 0%~30% |
FAQs
- Q: How do I clean my VAPORESSO LUXE X2?
- A: To clean your device, disassemble it carefully and use a damp cloth to wipe down the components. Avoid getting water or liquid into the device’s internal components. Allow all parts to dry completely before reassembling and using again.
Thank you for choosing the Vaporesso product. Please read this instruction carefully before use to ensure a perfect experience. If there is any additional requirement about this product, please consult the local agent or contact us through our website: www.vaporesso.com.
ENLARGED VIEW
FIGURE 1
FIGURE 2
SPECIFICATION
- Dimensions: 101 x 31.4 x 21.5 mm
- POD Capacity: 5ml/2ml(TPD)
- POD RESISTANCE:
- LUXE X Series 0.6Ω Mesh POD
- LUXE X Series 0.8Ω Mesh POD
- Battery Capacity: 2000mAh
- Output Power: 40W MAX
- Charging Current: DC 5V/1.5A,Type-C
- Display : LED Indicator
USE INSTRUCTIONS
- Install & Replace the Pod
- Pull out the pod from the battery and install the new one.
- If it’s the first time using the device, please tear off the sticker of the preinstalled pod.
- Fill the E-liquid (Refer to FIGURE 1)
- Take out the used POD from the battery and pull out the silicone plug from the bottom of the POD;
- Fill e-liquid through the hole
- Put the silicone plug back in place firmly after the filling is finished.
- If it’s the first time filling the e-liquid, please wait 5 minutes for the coil to prime.
- Adjust Airflow (Refer to FIGURE 2)
- There is an airflow control toggle on the side of the battery. Adjust the toggle according to your vaping habits for different airflow effects.
- Power ON/OFF
- Click the power button 5 times in 2 seconds to power on or power off the device.
- Start Vaping
- Press the power button to enjoy an extraordinary vaping experience.
- Check the Battery Level
- The LED indicator will stay in green/blue/red colour to show the battery level after vaping or inserting the pod.
Battery Level| LED Color
---|---
70%~100%| Green
30%~70%| Blue
0%~30%| Red
- The LED indicator will stay in green/blue/red colour to show the battery level after vaping or inserting the pod.
- Charging
- Please use the in-box Type-C cable to charge the device. The LED indicator will breath in a neon sign while charging and stay on green while fully charged.
PROTECTIONS
Low Resistance/Short-circuit/High
- Temperature: The red indicator will flash 5 times and the device will stop working.
- No Load/High Resistance: The current battery level indicator will flash 5 times and the device will stop working.
- Low Voltage/Over Discharging: The red indicator will flash 3 times and the device will stop working.
- Overcharging: The green indicator will stay on and the device will stop charging.
- Overtimes(8s): The device will stop working and the LED indicator will flash in green blue-red.
CAUTIONS
- Please turn off the device when it is not in use.
- Do not leave the charging device unattended.
- Do not drop, throw or abuse your device, which may cause damage.
- Please use a standard USB output charger with a proper charging current and voltage range.
- Keep away from the water or any flammable gas, or liquid.
- Do not expose the device to direct sunlight, dust, moisture or mechanical shock.
- Do not expose the device to extreme temperatures.
- ( Recommended temperature range: -10~60℃ / 14~140 ℉ using and -10~45℃ / 14~113 ℉ while storing).
- EEE Recycling: the product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
- Battery Recycling: the product batteryshould not be treated as household waste, instead, it should be handed over to the applicable used battery collection point for recycling.
- Only have your device repaired by VAPORESSO. Do not attempt to repair it by yourself as damage or personal injury may occur.
- Please keep the pins at the connection between the battery and the pod clean to ensure the best performance of the device.
WARNINGS
This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is an addictive substance and it is not suitable or recommended for use in the following cases:
- This device is not suitable for:
- Persons under the legal smoking age.
- Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficult breathing due to bronchitis, emphysema or asthma.
- Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumour of the adrenal gland that can affect blood pressure).
- Persons taking certain medications like theophylline, Ropinirole Clozapine etc.
- This device is not recommended for:
- Non-smokers
- Pregnant or breastfeeding women
- You may experience the following results if you use nicotine-containing e-liquid with this product. If it happens, please consult a healthcare professional and show them this leaflet if possible: Feeling faint / Nausea / Dizziness / Headache / Coughing / Irritation of the mouth or throat / Stomach discomfort / Hiccups / Nasal congestion / Vomition / Chest palpitations/pain or an irregular heart rate.
This device should not be used by persons under the legal smoking age.
LASER ANTI-COUNTERFEITING LABEL INSTRUCTIONS
Please keep the anti-counterfeiting code on the packaging for after-sale service.
- STEP 1 Check the label
- Flip the label under the light with a different angle, you will see the letter “V” position change.
- STEP 2 Verify the QR code
1. Scratch
2. Scan the QR code to verify.![VAPORESSO-LUXE-X2-Pod-Vape -Kit-fig-1 \(5\)](https://manuals.plus/wp-content/uploads/2024/05/VAPORESSO-LUXE-X2-Pod-Vape-Kit-fig-1-5.jpg)
WARRANTY
LIMITED WARRANTY CARD Limited 90-Day Warranty Terms
Warranty Period
- VAPORESSO offers a limited 90-day warranty.
- The warranty period is 90 days from the date of purchase.
- If you want to claim a warranty for your device, please keep valid proofs of the date of purchase, such as invoices/receipts.
- If there is no valid evidence to refer to, the start time of the warranty period will be calculated from the date of manufacture of the device.
Terms of Warranty
- For safety and hygiene reasons, please note that the following items or situations will
NOT covered under warranty:
- The following opened or used items will not be returned, including e-liquids, cartridges, coils, drip tips, tanks, atomizers and rechargeable batteries.
- Under no circumstances will we accept returns and no refunds will be given if anon-defective item has been opened and used.
- Product problems caused by human damage and misuse will not be covered by the warranty.
- Any hardware-cracked, dismantled or modified product is not covered under warranty.
- If the product happens to be faulty at the time of arrival, please inform us immediately before using it.
Except for the Limited 90-Day Warranty Terms, Vaporesso expressly disclaims all implied warranties of any kind concerning this product, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose and all warranties provided by statute, Warranty claims will expire 90 days after the end user purchases the device. For more information, please visit our website at www.vaporesso.com. Please keep the warranty card for the after-sale service. The warranty will be disqualified if the warranty card is lost.
Warranty Claim Procedure
- Please kindly contact the seller you purchased the product from for repair or replacement.
- Alternatively, if you have any product-related questions, you can scan the QR code on the back cover.
Information Needed for 90-Day Limited Warranty Claim:
- Proof of purchase
- Product name and quantity
- Batch number (VSGXXXX) and Security code (With pictures)
- Descriptions of the product problem
- Videos or pictures that reflect product problem
Notes
- It usually takes 5-10 days to verify all submitted warranty claim information. Please wait patiently.
- Once the requested warranty claim information is confirmed and approved, we will arrange a replacement for you. Please kindly note that if the original replacement product is out of stock or discontinued, we will ship an item of equal value to you with your consent.
VAPORESSO reserves the right to final interpretation of the warranty claim service
- Scan the QR code for any product-related question
- Scan the QR code for more languages
- www.vaporesso.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>