OXBOX JAYEXMK002A Extreme Condition Curb Mounting Kit Instruction Manual
- May 15, 2024
- Oxbox
Table of Contents
OXBOX JAYEXMK002A Extreme Condition Curb Mounting Kit
INSTALLATION INSTRUCTIONS
Extreme Condition Curb Mounting Kit JAYEXMK002A/003A
For Mounting on Full Perimeter Curbs USED WITH:
Oxbox 2 – 5 Ton Double
Deck Gas Units Only
BX-SVN-JAYEXMK002-003-1A-EN
RECOGNIZE THIS SYMBOL AS AN INDICATION OF IMPORTANT SAFETY INFORMATION
- WARNING
- These instructions are intended as an aid to qualified licensed service personnel for proper installation, adjustment and operation of this unit. Read these instructions thoroughly before attempting installation or operation. Failure to follow these instruction may result in improper installation, adjustment, service or maintenance possibly resulting in fire, electrical shock, property damage, personal injury or death.
- DO NOT DESTROY THIS MANUAL
- Please read carefully and keep in a safe place for future reference by a serviceman.
Installer’s Guide
Safety Section
- WARNING
- HAZARDOUS VOLTAGE!
- Failure to follow this Warning could result in property damage, severe personal injury, or death. Disconnect all electric power, including remote disconnects before servicing. Follow proper lockout/tagout procedures to ensure the power cannot be inadvertently energized.
- CAUTION
- SHARP EDGE HAZARD!
- Failure to follow this Caution could result in personal injury.
- Be careful of sharp edges on equipment or any cuts made on sheet metal while installing or servicing. Personal injury may result.
General Data
Kit Contents
Open and inspect kit contents for damage or missing items. Each kit contains:
| Items | Quantity |
|---|---|
| Hold-Down Bracket | 8 |
| Self-drilling #12-3/4 Screws | 48 |
Inspection
Check carefully for any shipping damage. This must be reported to and claims
made against the transportation company immediately. Any missing parts should
be reported to your supplier at once and replaced with authorized parts only.
Installation Instructions
These instructions are organized for an easy step-by step procedure.
- 1. Prior to setting the packaged unit onto the curb, attach the eight (8) brackets to the curb flange. There will be three (3) brackets on each of the long sides of the unit and one (1) bracket on each of the short sides of the unit. Each bracket will require three (3) of the #12 x 3/4” self-drilling screws supplied in the kit and attach to the curb flange as shown in Figure 1
| Models | A (in.) |
|---|---|
| 24 – 42 | 1.65 |
| 48 – 60 | 1.49 |
Place the packaged unit on top of the curb. Using three (3) additional
12×3/4” self-drilling screws per bracket, attach the brackets to the unit
base rail.
NOTE: See Figure 2 for the location of brackets on 24 – 42 models. Three
(3) brackets on each of the long sides and one (1) bracket on each of the
short sides.
Figure 2. JAYEXMK002A Bracket Locations on 24 – 42 Models
NOTE: See Figure 3 for the location of brackets on **48 – 60 models.
Three (3) brackets on each of the long sides and one (1) bracket on each of
the short sides.
Figure 3. JAYEXMK003A Bracket Locations on **48 – 60 Models
Oxbox®, endorsed by Trane®, offers simple, affordable residential heating and cooling solutions strong enough to tackle the toughest conditions. For more information visit www.oxboxhvac.com.
The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.
- Representative-only illustrations included in this document.
- BX-SVN-JAYEXMK002-003-1A-EN 28 Jul 2021 Supersedes (New)
© 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>