CONDOMOUNTS CLMTVT1064 Only Large Pillar TV Mount Instruction Manual
- June 15, 2024
- CONDOMOUNTS
Table of Contents
CONDOMOUNTS CLMTVT1064 Only Large Pillar TV Mount
Important Information
Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings,
please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may
result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
| CLMTVT1064 | 200×200/300×300/400×200 400×400/600×400 |
|---|
TO MAKE ADJUSTMENT AFTER INSTALLATION
TV too high? too Low? Not Centered? No problem!
HOW TO ADJUST THE POSITION OF THE COLUMN MOUNTING BRACKET
CAUTION:
Do not adjust the column mounting bracket while the TV is mounted.
- a. To release the strap pull, and hold the lever towards the handle, then rotate the handle a ll the way to position C.
- b. Move your column mounting bracket to the new desired position and tighten.
Package Content
Assembly And Mounting Instructions
Hold column mounting bracket to the column where you would like to mount the TV.
Ask a second person to wrap the strap around the column.
Person #2 should insert free end of strap into the slot of the ratchet buckle.
4a. Bring the ratchet buckle snug to the column and pull the strap tight.
4b. Crank the handle to tighten the strap until it feels taut and secure.
4c. Close the buckle to lock it.
Cut extra strap or fold and tuck away.
Customer Support
Need Help? Contact our pros:
647-557-5699 [email protected] condomounts.com
