Joie IM-000271I Fluri Drift Instruction Manual

IM-000271I Fluro Drift
Instruction Manual

IM-000271I Fluro Drift

muri ™ drift
Instruction Manual
Read these instructions carefully before use and keep them for future reference. Your child’s safety may be acted if you do not follow these instructions.
Welcome to Joie™  Congratulations on becoming part of the Joie family! We are so excited to be part of your journey with your little one. While traveling with the Joie Fluro™ Drift, you are using a high quality, fully  certified stroller, approved to Taiwan safety standards CNS 12940-2013. This product is suitable for use with children weighing under 15kg. Please carefully read this manual and follow each step to ensure a  comfortable ride and best protection for your child.
IMPORTANT – Keep these instructions for future reference. Visit us at joiebaby.com to download manuals and see more exciting Joie products! For warranty information, please visit our website at joiebaby.com

Emergency

In case of emergency or accident, it is most important to have your child taken care of with first aid and medical treatment immediately.

Product Information

Read all the instructions in this manual before using this product. If you have any further questions, please consult the retailer. Some features may vary depending on model.

Parts List

Make sure all parts are available before assembly. If any part is missing, please contact local retailer. No tools are required for assembly.

1 Stroller
2 Secondary
3 Drift Button
4 One-Hand-Fold Handle
5 Canopy
6 Shoulder Harness Cover
7 Armbar| 8 Seat Pad
9 Footrest
10 Front Swivel Lock
11 Front Wheel
12 Rear Wheel
13 5 Point Buckle
14 Storage Basket
15 Brake Lever
16 Handle
---|---

Accessories
(May not be included)

1. Shoulder Harness Cover
2. Infant Insert
3. Head Support
4. Armbar Cover
5. Rain Cover

Accessories may be sold separately or may not be available depending on region.

WARNING

• Adult assembly required.
• Never leave your child unattended.
• Always use the crotch combination with the waist belt. It is suggested that the shoulder harnesses be used as well.
• Ensure that all the locking devices are engaged before use.
• The parking device should be engaged when placing and removing your child.
• Use of the stroller with a child weighing less than 15kg. It will cause damage to the stroller with an unfitted child.
• To prevent a hazardous, unstable condition, do not place more than 4.5kg in the storage basket.
• Use the stroller with only one child at a time. Never place purses, shopping bags, parcels or accessory items on the handle or canopy.
• Overload, fold incorrectly or use it along with component parts from other manufacturers may cause the stroller to be damaged, broken or unsafe. Do read the instruction manual carefully.
• Please read all the instructions in this manual before using the product and save instruction manual for future use. Failure to follow these warnings and instructions may result in serious injury or death.
• Always use the restraint system. Safety belts and restraint system must be used correctly.
• To prevent tipping, do not put anything on the handle, back of the backrest or side of the stroller.
• Make sure your child’s body is clear from the moving parts when adjusting the stroller.
• Child may slip into leg openings and be strangled.
• Never use stroller on stairs or escalators.
• Keep away from fire source, high temperature objects, liquids, and electronics.
• Never allow your child stand on the stroller or sit in the stroller with head toward front of stroller.
• Never place the stroller on roads, slopes or dangerous area.
• Avoid strangulation, do not place items with a string around your child’s neck, suspend strings from this product.
• Do not lift stroller whilst child is in it.
• Do not use storage basket as a child carrier.
• To prevent tipping, never let child climb the stroller.
• To avoid injury, ensure that your child is kept away when unfolding and folding this product.
• Be sure the stroller is fully open or folded before allowing child near the stroller.
• To ensure your child’s safety, please make sure all parts are assembled and fastened properly before using the stroller.
• Avoid strangulation, do make sure your child is clear from the canopy and the rain cover.
• Always engage the brakes when parking the stroller.
• Discontinue using your stroller if it is damaged or broken.
• Accessories which are not approved by the manufacturer shall not be used. Only replacement parts supplied or recommended by the manufacturer shall be used.
• This product is not suitable for running or skating. It is intended to be used only at walking speed.
• To avoid suffocation, remove plastic bag and packaging materials before using this product. The plastic bag and packaging materials should then be destroyed or kept away from babies and children.
• Please move and place this product slightly, avoid dragging or thrusting to prevent.
• It is recommended the use of the most reclined position for baby less than 6 months.
• Do not let your child play with this product.

Stroller Assembly

(Please refer to figures on page 1-6)
Please read all the instructions in this manual before assembling and using this product.
Open Stroller
see images 1 – 3
Push secondary lock 1 -1 and squeeze one-hand-fold handle.
1 -2 Meanwhile, pull the stroller backward to open. Latches should click into place. 2
! Check that the stroller is completely open before continuing.3
Stroller Operation
Adjust Backrest Angle
see images 4 – 5
Recline Backrest
Pull tab to recline backrest. 4

• Hold the backrest with the other hand if a child is already seated in the stroller.

Raise Backrest
Hold both left and right strings and push up the angle adjuster to raise backrest. 5

• Before adjusting the backrest to the upright position, to ensure the detachable seat liner will not be caught into the stroller frame please fold in both sides of the seat liner.
• Make sure the backrest angle is set properly for use.

Use Armbar
see image 6
The armbar can be pulled up on both left and right sides.
Press armbar release button 6 -1, and then pull up the armbar. 6 -2 Align the armbar end with matching component, and then push down to lock.
Tip Armbar can be open for easy seating and unseating of child.
Use Buckle
see images 7 – 8
Release Buckle
Press the center button to release the buckle. 7
Lock Buckle
Match the waist belt buckle with the shoulder belt 8 -1, then align them with the center buckle, the buckle can lock automatically. 8 -2
A click sound means the buckle is locked completely. 8 -3

•  To avoid serious injury from falling or sliding out, always secure your child with harness.
• Make sure your child is snugly secured, the space between the child and the shoulder harness is about the thickness of one hand.
• Do not cross the shoulder belts. This will cause pressure on child’s neck.

Use Shoulder & Waist Harnesses see images 9 – 12

• In order to protect your child from falling out, after your child is placed into the seat, check whether the shoulder and waist harnesses are at proper height and length.

9 -1 Shoulder harness anchor
9 -2 Slide adjuster
For larger child, use Shoulder harness anchor and the highest shoulder slots.
For smaller child, use Shoulder harness anchor and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward. Thread it through the shoulder harness slot from back to front. 10
Rethread it through the slot that is closest to child’s shoulder height. 11
Use slide adjuster to change the harness length. 12 -1, Press the button 12 -2, while pulling the waist harness to proper length. 12 -3

Adjust Calf Support
see images 13 – 14

• Use the calf support when being in flat position.
  There are three angles for adjustment.
  To raise calf support, push the calf support from position 1 to position 3. 13
  To lower calf support, press the adjustment buttons on both sides of the calf support 14 -1, and rotate the calf support downwards. 14 -2

Use Canopy
see images 15 – 17
To open the canopy, pull canopy toward front. To fold the canopy, pull canopy toward back. 15
The window on the top of canopy can be opened. 16
Roll up the canopy rear panel, and through the webbing out the fabric loop, then snap-fit the snaps on the webbing. 17
! It is convenient to see the baby when rolling up the canopy rear panel. 17
Use Front Swivel Lock
see image 18
Pull up the front swivel locks to maintain the moving direction. 18
Tip It is recommended to use swivel lock on uneven surfaces.
Use Brake
see images 19 – 20
To lock wheels, step on the brake lever as 19 , the stroller is braked on the condition that both of the brakes are stepped. Lift the brake lever to release wheel. 20
Tip Always apply brake when stroller is in stopped position.

Use Drift
see image 21
Press the drift button 21 -1, All wheels of the stroller can be rotated. 21

• Please release front wheel orientation lock and rear wheel brake pedal before use drift.
• When use drift, all wheels are in free rotation status, please be sure to push the stroller forward for a distance to make rear wheels return to locked state after use drift, then stroller can be used normally.

Fold Stroller
see images 22 – 24
Please fold the canopy before folding the stroller.
Push secondary lock 22 -1 and squeeze one-hand-fold handle.
22 -2 Push the stroller forward to fold 23 . A click sound means the stroller is folded completely. 24

Use Accessories
Accessories may be sold separately or may not be available depending on region.
Use Shoulder Harness Cover
see image 25
Unfasten buttons on the shoulder belt cover, 25 -1 The shoulder harness cover can be removed from the webbing after pulling the elastic. 25 -2 To assemble shoulder harness cover in reverse steps.
Use Infant Insert and Head Support
see images 26 – 28
Release the buckle, thread the shoulder harnesses and crotch harness through respective slots on the infant insert. 26
Then fix the webbing on the top of the small insert to the back of backrest. 27
Put the webbing through the corresponding holes of the headrest. 28

• The infant insert can be used on both sides.
• Use infant insert in cold weather to provide a comfortable seating area.
• The infant insert can be removed to provide mesh seating area for better ventilation during hot weather.

Use Rain Cover
see image 29
To assemble the rain cover, place it over the stroller, and then attach the hook and loop fasteners on the rain cover. 29

• When using the rain cover, please always check its ventilation.
• When not in use, please check that the rain cover has been cleaned and dried before folding.
• Do not fold the stroller after assembling the rain cover.
• Do not place your child into the stroller assembled with rain cover during hot weather.

Care and Maintenance

see image 30

1. Removable seat pad may be washed in cold water and drip-dried. No bleach.
2.  To clean stroller frame, use only household soap and warm water. No bleach or detergent.
3. From time to time check your stroller for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed.
4. Excessive exposure to sun or heat could cause fading or warping of parts.
5. If stroller becomes wet, open canopy and allow to dry thoroughly before storing.
6. If wheels squeak, use a light oil (e.g., WD-40, antirust oil, or sewing machine oil). It is important to get the oil into the axle and wheel assembly. 30
7. When using your stroller at the beach, completely clean your stroller afterward to remove sand and salt from mechanisms and wheel assemblies.

NOTE Allison Baby UK Ltd.
Venture Point, Towers Business Park
Rangeley, Staffordshire, WS15 1UZ
view all fine signature selections at
joiebaby.com/signature
IM-000271I
2022/08/10

References

• Ebaby | World's Largest Baby Platform
• Baby Gear That Goes Above & Beyond | Joie
• Joie's Signature Collection | Luxury Baby Gear
• 奇哥 online store
• Baby Gear That Goes Above & Beyond | Joie

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>