MIIEGO Miibuds Action TWS Earbuds User Guide
- June 5, 2024
- MIIEGO
Table of Contents
MIIEGO Miibuds Action TWS EarbudsINTRODUCTION
Power your MiiBUDS ACTION TWS earbuds ON/OFF
ON: Take out the earbuds from the charging case and they will
automatically power on OR you can manually press the PLAY-button for 3
seconds. When ON: The blue LED flashes 2 times and you will hear: “Power ON”.
OFF: Place the earbuds back into the charging case and close it, and they
will turn off automatically OR manually press the PLAY-button for 3
seconds.When OFF: The red LED flashes 3 times.
Pairing Your MiiBUDS ACTION earbuds
- Take out both earbuds from the charging case, and they will connect to each other automatically.
- Activate Bluetooth on your phone (or other device) and search for new Bluetooth device and select: MiiBUDS ACTION.
- You will hear “Connected” in one earbud and the LEDs on both earbuds will flash blue twice every 5 seconds hereafter.
Charging Your Earbuds and the Charging Case
Earbuds: Place the earbuds into the charging case. The red LEDs on the earbuds
will be ON when charging. They will turn OFF, when the earbuds are fully
charged.
Charging Case
Use a 5V/1A USB adapter for wired charging. Connect the charging cable on the
side of the charging case (E) . The 4 white LEDs on the charging case will
indicate the battery status of the charging case: 4 lights turned on mean 100%
battery, 2 lights on 50% etc.
Wireless Charging of Charging Case: Make sure to place the Charging Case
correctly on the wireless charging plate/charger. Full charging time of the
charging case is about 3 hours.
Play/Pause
Press the PLAY-button once on either earbud.
Volume Up / Volume Down
Turn UP volume: Press and hold the PLAY-button on the RIGHT earbud.
Turn DOWN volume: Press and hold the PLAY-button on the LEFT earbud.
Next Song / Previous Song
SKIP to NEXT song: Double press the PLAY-button on the RIGHT earbud.
SKIP to PREVIOUS song: Double press the PLAY-button on the LEFT earbud.
Answer Call/ Hang Up Call/ Reject Call
Press the PLAY-button once to answer an incoming call on either earbud. Press
once again to hang up. Double press the PLAY-button to reject an incoming
call.
Activate Siri on iOS-device:
Access Siri by triple-pressing the PLAY-button on either earbud.
Soft Reset: If the earbuds fail to pair automatically, please follow
these instructions:
- Delete “MiiBUDS ACTION” from the Bluetooth list on your phone/device.
- Power ON and hold the PLAY-button for 3 seconds on both earbuds. The earbuds will connect to each other automatically and enter pairing mode.
- Select “MiiBUDS ACTION” in the Bluetooth list on your phone/device.
- A: PLAY-button
- B: LED indicator for when the earbuds are charging
- C: LED indicator charging case battery status
- D: Powerbank USB-output port E: Charging input port
SPECIFICATIONS
- Bluetooth v5.0+EDR.
- Frequency range: 2.402-2.480GHz.
- Earbuds: rechargeable 50 mA/h Li-ion battery. Charging case: rechargeable 1800 mA/h Li-ion battery. Frequency Response: 20Hz-20KHz.
CARE, MAINTENANCE, SAFETY
WARNING: Do not use while driving or where vehicular traffic is present, or in any other activity where failure to hear your surroundings could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Keep out of reach from children and animals. Avoid direct sunlight. Product storage and working temperatures: from -10 degrees to +45 degrees. Do not dispose the battery in fire, as it may cause an explosion. Any modifications to the device will void the user warranty and may have consequences for your safety.
Only listen to music in a moderate volume and in moderate periods of time. Excessive exposure to high sound levels can lead to noise-induced hearing loss.
This device contains a lithium accumulator. Improper use can cause overheating and fire.
MIIEGO A/S Lejrvejen 4 6330 Padborg Denmark tel: +45 70 277 887
e-mail: support@miiego.com
www.MIIEGO.com