MIIEGO MOOVE 45i PRO Wireless Headphone User Guide

June 15, 2024
MIIEGO

MIIEGO MOOVE 45i PRO Wireless Headphone User Guide

Quick Start Guide

LED indicator for charging / pairing Volume Up / Next Song

Press once / Hold

M-button

Turn headphones on / off. Play / pause. Answer call, end / reject call. Siri Volume Down / Previous Song

Press once / Hold

Charging port

Built-in Microphone
ANC noise cancelling / Low latency button.
LED indicator for ANC (Green=On)

The Active Noise Cancelling (ANC) function will reduce unwanted environmental noise and deliver a clearer audio performance.

Please note:

ANC is mainly used for low frequency band noise. Even though environmental noise is reduced, it may not be entirely eliminated and voice etc. can be heard. Smartphones may cause ANC interference/noise. If so, move the phone away from the headphones.
Do not press the headphones or ear cushions, when ANC is on, as this may interfere the ANC microphone and cause high ‘beep’ noise.
When ANC is ON it will consume more battery.

SPECIFICATIONS

BT v5.3. Rechargeable 400 mA/h Li-ion battery. Full charging time: around 2-3 hours.
Frequency range: 2.402-2.480GHz. Freq. Response: 20Hz-20KHz.

CARE, MAINTENANCE, SAFETY

WARNING: Do not use while driving or where vehicular traffic is present, or in any other activity where failure to hear your surroundings could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Keep out of reach from children and animals. Avoid direct sunlight. Product storage and working temperatures: from 5 degrees to +40 degrees. Do not dispose the battery in fire, as it may cause an explosion. Any modifications to the device will void the user warranty and may have consequences for your safety.

Pairing Your MOOVE 45i PRO by MIIEGO® Wireless Headphones

1: Make sure your MOOVE 45i PROs are charged and turned OFF
2: Press and hold the M- button on the headphones for 3 seconds until the indicator light flashes Red and Blue alternatively (pairing mode).
3: Activate BT on your phone or other device and search for BT devices and select

MOOVE 45i PRO by MIIEGO® .

Charging Your MIIEGO Headphones

When the Red light is on, the headphones are charging. When the Red light is off, the headphones are fully charged. Full charging time is around 2-3 hours.

Next time charging

When you hear a warning tone of “battery low” every 180 seconds and the Red light blinks, the battery status is low and needs charging.

Turning Your MIIEGO Headphones On and Off

ON: Press the M-Button for 3 seconds until the indicator light turns Blue. OFF: Press the M-Button until the indicator light turns Red for 2 seconds.

Battery status with voice prompt when headphones are turned on

Battery high: 71-100%
Battery medium: 30-70%
Battery low: 0-29%

How to activate the ANC – Active Noise Cancelling function Press Button 7 to activate  Noise  Cancelling  On  and  Off When ANC is ON the green indicator light is ON.

How to activate the Low Latency function

Double-press Button 7 to activate Low Latency On and Off. When Low Latency is activated, you will hear a tone.

Soft reset

Make sure you delete “ MOOVE 45i PRO ” from your phones BT-device settings before resetting.

  1. When power is off, press and hold the M-button for 5 seconds until the light flashes blue and
  2. Press and hold both +/- buttons simultaneously for 10 seconds until you see the red light flashing 3 The headphones will then power OFF automatically.

Multi-point connection (pair 2 devices):

  1. Connect your FIRST device as normal. Then, turn off Bluetooth in settings on that The headphones will then automatically enter pairing mode again.
  2. Connect your SECOND device as normal to the
  3. Then activate your FIRST device again and turn on Re-connect/pair the headphones to that device again.

Activate Siri on iOS-device:

Access Siri by pressing the M-button 2 times

Only listen to music in a moderate volume and
This device contains a lithium accumulator. Improper use can cause overheating and firein moderate periods of time. Excessive exposure  For California Residents:
WARNING: This product containsto high sound levels can lead to noise-induced hearing loss.
chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals