AUDIO ARRAY AM-C11 USB XLR Dynamic Microphone Instruction Manual
- June 14, 2024
- AUDIO ARRAY
Table of Contents
**AUDIO ARRAY AM-C11 USB XLR Dynamic Microphone Instruction Manual
**
SETTINGS
Windows
Step 1: Plug the USB microphone into your computer. The computer will automatically recognize the USB device and install a driver.
Step 2: Right-click on the sound icon on the system tray and select **Sounds
**
Step 3: Click the Recording tab and select the Audio Array AM-C11 Device and click on the Set Default button.
macOS
Step 1: Plug the USB microphone into your computer. The computer will
automatically recognize the USB device and install a driver.
Step 2: Open your System Preferences.
Step 3: Click Sound to display the Sound preference pane
Step 4: Click the Input tab and select the Audio Array AM-C11 Device
the device for sound input.
ACCESSORIES
-
Microphone
-
XLR Audio Cable.
-
3/8″ to 5/8″ Adapter
-
USB Audio Cable
-
USB-A to Type-C Adapter
INSTRUCTIONS & SPECIFICATIONS
- Indicator Light/Mute Function the indicator will show blue when the mic is working. Press the mute button to mute the microphone, meanwhile, the indicator light will turn red.
- Mico phone/Headphone volume control function Long press the mute button for 2 seconds. Switch the mico phone or headset volume control function according to the indicator light.
| Polar Pattern: | Cardioid |
|---|---|
| Input Sample Rate: | 96kHz |
| Bit Rate: | 24Bit |
| Frequency Response: | 50Hz-14KHz |
| Sensitivity: | -54dB±1.5dB (0dB=1V/Pa, at 1kHz) |
| Output Impedance: | 6000 |
| THD+N | <1% |
| S/N Ratio: | 95dB |
| USB Cable Length: | 2m |
CONNECT VIA XLR
If using the microphone via XLR,simply connect the microphone to an audio
interface or mixer and start creating.
Note, the button function on the microphone will not be activated when
using the microphone via XLR.
CONNECT VIA USB
If using the microphone via USB,simply connect the microphone to computer and
start creating.
If using the microphone via USB,simply 3/8″ to 5/8” Adapter X USB Audio Cable Polar Pattern: Cardioid connect the microphone to cellphone Input Sample Rate: 96KHz (use adapter) and start creating.
support@audioarray.in
audioarray.in
/c/AudioArray
@audioarray.in
@audioarray.in
@audio_array
Symbols
Documents / Resources
|
AUDIO ARRAY AM-C11 USB XLR Dynamic
Microphone
[pdf] Instruction Manual
AM-C11 USB XLR Dynamic Microphone, AM-C11, USB XLR Dynamic Microphone, XLR
Dynamic Microphone, Dynamic Microphone, Microphone
---|---