MIIEGO 1702392942 Wireless Portable Speaker User Guide
- June 15, 2024
- MIIEGO
Table of Contents
MiiSOUND
WIRELESS PORTABLE SPEAKER
BY MIIEGO Quick Start Guide
1702392942 Wireless Portable Speaker
1. button: Power On/ Off.
2. TWS
3. Volume
4. Mode (BT/ AUX/ USB/ TF).
5. Play / Pause
6. Party Lights control-button
7. Bass Boost (Standard/ Bass)
8. Previous song| 9. Next song
10. AUX IN
11. USB port in
12. TF card slot
13. Wired Microphone Port
14. LED indicator for Charging
15. Charging Port
---|---
SPECIFICATIONS
BT v5.3. Rechargeable 6000 mAh Li-ion battery. Full charging time: 4 hours.
Battery playing time: up to 8 hours per charge (depending on volume level).
Frequency range: 2.402-2.480 MHz. Freq.
Response: 80Hz-12 KHz. Charging input power: 5V DC/1.5A.
RMS audio output: 20W. Output Peak Power: 40W. Impedance: 4Ω.
CARE, MAINTENANCE, SAFETY
Any modification of the product may have consequences for safety, warranty and
proper functioning. Keep out of reach for children and animals. Product
storage and working temperature: from -5 Celsius degrees to +40. Do not expose
the product to direct sunlight, heat or naked flames as it may cause damage
or explosion. Do not use the product if a part is damaged or defective.
Replace a damaged or defective device immediately. Disconnect the product from
the electrical outlet and other equipment if problems occur. Do not charge
when the product is wet. Do not leave a battery on prolonged charge when not
in use. Do not dismantle, open or shred batteries. Do not drop the product and
avoid bumping. This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock etc.
This device contains a lithium accumulator.
Improper use can cause overheating and fire.
Pairing your MiiSOUND wireless speaker
- Make sure the speaker is charged and turned OFF.
- Press and hold the button for 2 seconds to turn the speaker on.
- Activate BT on your phone or other device and search for new device and select: MiiSOUND by MIIEGO®.
The speaker will remember your phone/device and automatically reconnect the
next time you turn it on.
An unpaired speaker will automatically turn off after 15 minutes.
Charging the MiiSOUND speaker
Use a 5V DC/1.5A USB adapter for charging.
When the Red light is on, the speaker is charging.
When the Red light is off, the speaker is fully charged.
Full charging time is around 4 hours.
Next time charging
When you hear a warning tone every 180 seconds, the battery status is low and
needs charging.
Turning Your MiiSOUND On and Off
ON: Press and hold the Button for 2 seconds until a tone is heard.
OFF: Press and hold the Button for 2 seconds until a tone is heard.
Pairing and connecting 2 x MiiSOUND speakers with TWS
TWS only works when connecting two MiiSOUNDs together.
- Turn on both speakers (BT mode). Make sure they are unconnected and within 10 meters distance.
- Press button 2 (TWS) once on one speaker. The speaker emits a tone to indicate entering TWS-pairing mode.
- The other speaker will then automatically wirelessly connect to the first speaker.
- Then activate BT on your phone and connect with the other speaker.
To prevent possible hearing damage. de not listen at high volume levels for
lorg periods.
Please respect your surroundings, neighbours and local laws and regulations.
This product isin complarce with the essertial requirements and other relevant
provisions af Directive 2014/53/EU.
The declaration ef corfarmity (Dat) may be cansu ted at:
https://miuego.cam/dac/
Model No.: MiiSOUND
Designed in Denmark.
Produced in China.
MIIEGO A/S
Sintrupvej 2
8220 Brabrand Denmark
tel: +45 70 277 887
e-mail: support@miiego.com
www.MIIEGO.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>