MIIEGO DJE0007150-000 Boom ANC Over-Ear Headphones User Guide
- June 5, 2024
- MIIEGO
Table of Contents
DJE0007150-000
Boom ANC Over-Ear Headphones
User Guide
BOOOM ANC BY MILEGO
WIRELESS HEADPHONES with ACTIVE NOISE CANCELLING
DJE0007150-000 Boom ANC Over-Ear Headphones
- Volume Down / Previous Song Press once / Hold
- Volume Up/ Next Song Press once / Hold
- M-button Turn headphones on/off. Play/ pause. Answer call, end/reject call.
- Charging port
- Built-in Microphone
- LED indicator for pairing and power
- LED indicator for charging
- Line in AUX 3.5mm jack
- ANC noise-canceling button: ON/OFF
- LED indicator for ANC. Blue = ON.
ABOUT ANC – Active Noise Cancelling
The Active Noise Cancelling (ANC) function will reduce unwanted
environmental noise and deliver a clearer audio performance.
Please note:
- ANC works best with correct wearing and both ears covered by the ear cushions.
- ANC works best with PU leather ear cushions since the sport cushion material is more breathable.
- ANC is mainly used for low-frequency band noise. Even though environmental noise is reduced, it may not be entirely eliminated and voices etc. can be heard.
- Smartphones may cause ANC interference/noise. If so, move the phone away from the headphones.
- Do not press the headphones or ear cushions, when ANC is ON, as this may interfere with the ANC microphone and cause high ‘beep’ noise.
- When ANC is ON it will consume more battery.
SPECIFICATIONS
Bluetooth v5.0.
Rechargeable 680 mA/h
Li-ion battery.
Full charging time: around 3-4 hours.
Frequency range: 2.402-2.480GHz. Freq.
Response: 20Hz-20KHz.
CARE, MAINTENANCE, SAFETY
WARNING: Do not use while driving or where vehicular traffic is present, or in any other activity where failure to hear your surroundings could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Keep out of reach for children and animals. Any changes or modifications to the device will void the user’s authority to operate the device. Do not dispose of the battery in the fire, as it may cause an explosion. The battery is recycled. Copyright MIIEGO A/S. All rights reserved.
Pairing Your BOOM ANC by MIIEGO® Bluetooth Headphones
- Make sure your BOOMs are charged and turned OFF.
- Press and hold the M- button on the headphones for 7 seconds until the indicator light flashes red and Blue alternatively (pairing mode).
- Activate Bluetooth on your phone or other device and search for Bluetooth devices and select BOOM ANC by MIIEGO.
Charging Your MIIEGO Headphones
When the Red light is on, the headphones are charging.
When the Red light is off, the headphones are fully charged.
Full charging time is around 3-4 hours.
Next time charging
When you hear a warning tone of “battery low” every 180 seconds and the
The red light blinks, the battery status is low and needs charging.
Turning Your MIIEGO Headphones On and Off
ON : Press the M-Button for 3 seconds until the indicator light flashes
Blue 3 times.
OFF: Press the M-Button until the indicator light flashes red 2 times.
How to activate the ANC – Active Noise Cancelling function
ON: Turn the ANC button down (you see a green dot).
OFF: Turn the ANC button-up (you see a red dot).
When the ANC is ON the Blue indicator light in the bottom is ON.
Interchangeable Ear Cushions
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Only listen to music in a moderate volume and in moderate periods of time.
Excessive exposure to high sound levels can lead to noise-induced hearing
loss.
This device contains a lithium accumulator. Improper use can cause overheating
and fire.
For California Residents:
WARNING: This product contains chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm.
At high volume, prolonged listening to the personal audio player can damage
the user’s hearing.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Model No.: BOOM ANC by MIIEGO
FCC ID: 2ARFN-BOOM Designed in Denmark.
Produced in Chino.
MIIEGO A/5 Sintrupvel 2 8220
Brabrand Denmark
tel: +45 70 277 887
e-mail: support@mnego.com
www.vIIEGO.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>