MIIEGO MiiBLASTER WIRELESS SPEAKER User Guide

: June 5, 2024
: MIIEGO

Table of Contents

MIIEGO MiiBLASTER WIRELESS SPEAKER
INSTRUCTIONS
SPECIFICATIONS
CARE, MAINTENANCE, SAFETY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MIIEGO MiiBLASTER WIRELESS SPEAKER

MIIEGO-MiiBLASTER-WIRELESS-SPEAKER

INSTRUCTIONS

Battery indicator – 4 LED lights
Volume up / Next song
Volume down / Previous song
Play / Pause
EQ (BASS / ROCK / POP / CLASSIC)
Mode (switch between Bluetooth, USB and AUX-IN), Long press for TWS.
button: Power On /Off. Pairing. USB Port, Charging port, AUX IN

SPECIFICATIONS

Bluetooth v5.0. Rechargeable 5400 mAh Li-ion battery.
Full charging time: around 4-8 hours. IPX5.
BT frequency range: 2.402-2.480GHz. Freq. Response: 80Hz-12 KHz.
Charging input power: 5V DC/1A or 2A. RMS audio output: 2x22W. Impedance: 4Ω.

CARE, MAINTENANCE, SAFETY

Any modification of the product may have consequences for safety, warranty and proper functioning. Keep out of reach for children and animals. Product storage and working temperature: from -10 celsius degrees to +40. Do not expose the product to direct sunlight, heat or naked flames as it may cause damage or explosion. Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately. Disconnect the product from the electrical outlet and other equipment if problems occur. Do not charge when the product is wet. Do not leave a battery on prolonged charge when not in use. Do not dismantle, open or shred batteries. Do not drop the product and avoid bumping. This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock etc.
Note: This device contains a lithium accumulator. Improper use can cause overheating and fire.

Pairing your MiiBLASTER MIIEGO® Bluetooth speaker

Make sure the speaker is charged and turned OFF.
Press and hold the button for 2 seconds until the indicator light flashes Blue (pairing mode).
Activate Bluetooth on your phone or other device and search for Bluetooth devices and select: MiiBLASTER.

When MiiBLASTER is connected the Blue light is constantly on.
The speaker will remember your phone/device and automatically reconnect the next time you turn it on. An unpaired speaker will automatically turn off after 6 minutes.

Charging the MiiBLASTER speaker
Use a 5V/1A or 2A USB adapter for charging.
During charging the 4 LED battery indicator lights will flash one by one. When fully charged the lights will stay on permanently.
Full charging time is around 4-6 hours with 2A and 6-8 hours with 1A.

Next time charging
When the first battery LED indicator light is flashing every 5 seconds, the battery status is low and needs charging.
You will then also hear a battery warning tone every 120 seconds.

Turning Your MiiBLASTER On and Off
ON: Press and hold the Button for 2 seconds until a tone is heard.
OFF: Press the Button once and a tone is heard.

Activate Siri on iOS-device: Press and hold the PLAY button for 2-3 seconds (works only in Bluetooth mode).

Play music from USB or AUX IN mode
Insert USB flash or AUX audio cable on the back of the speaker (in AUX mode switching songs on +/- buttons is unavailable).

Pairing and connecting 2 x MiiBLASTER speakers with TWS
TWS only works when connecting two MiiBLASTERs by MIIEGO® together.

Turn on both speakers (Bluetooth mode). Make sure they are unconnected.
Press and hold button 6 on one speaker for 4 seconds. The product emits a tone to indicate entering TWS-pairing mode.
Activate Bluetooth on your audio source and connect with the product. The product emits three tones and button 6 lights up to indicate successful TWS-pairing.

To prevent possible hearing damage, do not listenat high volume levels for long periods.