MIIEGO MiiPOCKET MINI Wireless Speaker User Guide

MiiPOCKET MINI
WIRELESS SPEAKER
BY MIEGO

MiiPOCKET MINI Wireless Speaker

Quick Start Guide

1. Volume Down / Previous Song
   Press once / Hold TWS

2. M-button
   Power on/off, play/pause, answer call

3. LED indicator / Microphone

4. Volume Up/ Next Song
   Press once / Hold TWS

5. Charging port

6. AUX IN

SPECIFICATIONS

CARE, MAINTENANCE, SAFETY

Any modification of the product may have consequences for safety, warranty and proper functioning. Keep out of reach for children and animals. Product storage and working temperature: from -5 Celsius degrees to +40. Do not expose the product to direct sunlight, heat or naked flames as it may cause damage or explosion. Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately. Disconnect the product from the electrical outlet and other equipment if problems occur. Do not charge when the product is wet. Do not leave a battery on prolonged charge when not in use. Do not dismantle, open or shred batteries. Do not drop the product and avoid bumping. This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock etc.

This device contains a lithium accumulator.
Improper use can cause overheating and fire.

Pairing your MiiPOCKET MINI Wireless speaker

1. Make sure the speaker is charged and turned OFF.
2.  Press and hold the button for 2 seconds to turn the speaker on.
3. Activate BT on your phone or other device and search for new device and select: MiiPOCKET MINI.
   The speaker will remember your phone/device and automatically reconnect the next time you turn it on.
   An unpaired speaker will automatically turn off after 6 minutes.

Charging the MiiPOCKET MINI speaker
Use a 5V/1A USB adapter for charging.
During charging the red light is on. When fully charged the red light is off.
Full charging time is around 3 hours with 1A.
Next time charging
When you hear a warning tone every 180 seconds, the battery status is low and needs charging.
Turning Your MiiPOCKET MINI On and Off
ON: Press the button for 2 seconds until a tone is heard.
OFF: Press the button for 2 seconds until a tone is heard.
Pairing and connecting 2 x MiiPOCKET MINI speakers with TWS
TWS only works when connecting two MiiPOCKET MINIs together.

1. Turn on both speakers (BT mode). Make sure they are unconnected.
2. Double press + button (4) or – button (1) on one of the speakers. The speaker then emits a tone to indicate entering TWS-pairing mode.
3. The product emits three tones and the LED indicator light (3) will be constantly on. This is then the slave speaker. LED indicator light on master speaker will flash to indicate successful TWS-pairing.
4. Activate BT on your phone/device and connect with the master speaker.

To prevent possible hearing damage, do not listen at high volume levels for long periods.
Please respect your surroundings, neighbours, and local laws and regulations.
This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The declaration of conformity (DoC) may be consulted at: https://miiego.com/doc/

Model No.: MiiPOCKET MINI
Designed in Denmark.
Produced in China.
MIIEGO A/S
Sintrupvej 2
8220 Brabrand Denmark
tel: +45 70 277 887
e-mail: [email protected]

www.fsc.org
MIX
Paper from responsible sources www.MIIEGO.com

References

• Startseite - Das neue Elektrogesetz (ElektroG, WEEE) 2024
• MIIEGO - Active Lifestyle Audio
• Declaration of Conformity – MIIEGO - Active Lifestyle Audio

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>