TELTONIKA TSW110 Switch 5-Port Gigabit Ethernet User Guide

TELTONIKA TSW110 Switch 5-Port Gigabit Ethernet

HARDWARE

FEATURES

ETHERNET

• LAN ports, 10/100/1000 Mbps, compliance with IEEE 8023, IEEE 802.3u, 802.3az standards, supports auto MDiUMDIX AN

PERFORMANCE SPECIFICATIONS

• bandwidth (Non-Blocking) 10 Gbps
• Packet buf 128 NB
• MAc address table size 2K entries
• connector 4 pin industrial Dc power socket
• input voltage range 9-30 VDC, reverse polarity protection, voltage surge/transient protection
•  PoE. passive  POssibility to power up through LAN port, not compatible with IEEEBU2.3at, 802.3at, and 802.3bt standards
• power consumption idle/max) 0.4 WI <1.8 W

PHYSICAL INTERFACES (PORTS, LEDS)

• EtnE  5x Rj4s ports, 10/100/1000 Mbps
• Ludus 1x power LEDs
• Power  1×4  10 x LAN status LED’S
• Ground 1x  pin DC connector

PHYSICAL SPECIFICATION

• Casing material  Full aluminum housing
• Dimensions (W x H x D) 100 x 30 x 85 mm
• Weight  227 g
• Mounting options  DIN rail or wall mounting (additional kit needed), flat surface placement

OPERATING ENVIRONMENT

• Operating temperature  -40 C to 75 C
• Operating humidity  10 % to 90 % non-condensing

HARDWARE INSTALLATION

1. Connect your main internet router/modem to TSW110 LAN port number 1.
2. connect end devices (ex. Industrial PC, printers, IP phones, laptops) to TSW110 2 to 5 port.
3. Connect 4 pin power plug to TSW110 to power up switch.

TECHNICAL INFORMATION

Technical specifications

Input voltage range| 9 – 30 VDC
Max power consumption| <1.8 W
**Bundled accessories specifications***
Power adapter| Input: 0.4 A @100-240 VAC, Output: 9 VDC, 1 A, 4 pin plug

WHAT’S IN THE BOX?

THE STANDARD PACKAGE CONTAINS

•  TSW110
• 9 W PSU
• QSG (Quick Start Guide)
• Packaging box

For all standard order codes standard package contents are the same, execpt for PSU.

STANDARD ORDER CODES

PRODUCT CODE

• TSW110000000
• TSW110000010

HS-CODE

• 851762
• 851762

HTS CODE

• 8517.62.00
• 8517.62.00

PACKAGE CONTAINS

• Standard package with Euro PSU
• Standard package with US PSU

MOUNTING OPTIONS DIN

DIN RAIL KIT

• DIN Rail adapter
• Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx

COMPACT DIN RAIL KIT

DIN RAIL KIT

• Compact plastic DIN Rail adapter (70x25x14,5mm)
• Philips Pan Head screw #6-32×3/16, 2pcs

SURFACE MOUNTING KIT

• Surface mounting kit
• Philips Pan Head screw #6-32×3/16, 2pcs

TSW110 SPATIAL MEASUREMENTS & WEIGHT

MAIN MEASUREMENTS

TOP VIEW
The figure below depicts the measurements of TSW110 and its components as seen from the top:

RIGHT VIEW
The figure below depicts the measurements of TSW110 and its components as seen from the right side:

FRONT VIEW
The figure below depicts the measurements of TSW110 and its components as seen from the front panel side:

REARVIEW
The figure below depicts the measurements of TSW110 and its components as seen from the back panel side:

MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables and antennas are attached:

DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>