HALO TECHNOLOGIES S3 Body Camera User Guide
- June 12, 2024
- HALO TECHNOLOGIES
Table of Contents
HALO TECHNOLOGIES S3 Body Camera
Product Information
- Model: S3
The S3 is a portable device that can be used in various exposure conditions without any restrictions.
Product Usage Instructions
To use the S3 device, follow these steps:
- Ensure that the device is fully charged by connecting it to a power source using the provided charging cable.
- Press and hold the power button located on the device until the LED indicator lights up.
- Once the device is powered on, you can adjust the settings by using the buttons or controls provided.
- To start using the device, position it in the desired exposure condition. The S3 can be used in both indoor and outdoor environments.
- Make sure to keep the device at an appropriate distance from the subject or area you want to expose.
- Monitor the device’s display or indicators for any relevant information or alerts during usage.
- To turn off the device, press and hold the power button until the LED indicator turns off.
- When not in use, store the device in a safe and dry place to ensure its longevity.
Please refer to the complete user manual for more detailed instructions and safety guidelines.
Warning
- Please keep the device at high temperatures.
- When smoke, smell, or noise comes out from the device, shut down the power immediately, and contact your supplier in time.
- Please contact your supplier if the device is not working properly. No warranty will be covered if the damage is caused by unauthorized disassembly or repair.
- Please do NOT charge the device at a high temperature of over 45 degrees Celsius, it could possibly cause the explosion of the battery. Please use the certificated battery from the original factory ONLY.
- Please read this manual carefully before using the device, and follow the instructions when using the device.
- Please do NOT kick or hit the product to avoid device damage and data missing.
- Keep the device away from high temperature and high humidity environments.
- Keep the device away from strong interference sources.
- Please backup the data recorded by the device in time.
- Please keep the lens clean for good image quality.
- Please keep your username and password safe.
Product introduction
Operation
Only for 4G products with
Indicator
Customer service
User Notice
Warranty
- This product is warranted for one year;
- Warranty are not covered in any case of unauthorized modification, repair or damage (such as water, moisture, drop, improper use, etc.)
- In order to extend the life of the battery, it is recommended to charge once every three months when devices are not used for a long time.
Technical support service
If you have any operation or technology problems when you are using product,
you can refer to the user manual to find solutions.
If that still can’t help,try the ways below to find help:
- Contact your supplier for technical support
- Regardless of the method of seeking technical services, please be sure to provide the model number, device ID and detailed malfunction of the failed unit, so that our engineers can be more quickly and accurately to help or repair.
Precautions before maintenance
- Do simple troubleshooting before you send device back, if that still can’t help you solve problems, please confirm the basic information of the product and contact the supplier for repair.
- If the product is out of warranty, make a preliminary quotation for the product repair, and we will provide repair service after receiving your consent.
Note:
The service mentioned in this warranty is a standard service.
If you have an extra agreement with the company on the service at the time of purchase, the extra service agreement signed will prevail.
Warranty card
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>