TESLA Q55K925SUS 55-Inch Ultra HD Smart TV Instruction Manual

Q55K925SUS 55-Inch Ultra HD Smart TV

OPERATING INSTRUCTION

Please read these instructions before operating your set and retain them for future reference.

NOTE
This device is intended for household use exclusively. Professional and/or commercial use of a device intended for household purposes shortens its working life and has a negative effect on the device’s performance characteristics.

COMPONENTS

• Tesla Smart Ultra HD LED TV
• Remote control (x1) + AAA battery (x2)
•  Magic remote controller (x1) + AA battery (x2)
• Stand (x2) + Stand screw (x4)
• Quick-start guide
• Warranty Card

NOT INCLUDED: Head screwdriver, antenna cable, broadband internet connection.

BASIC REMOTE CONTROL

MAGIC REMOTE CONTROL

Magic Remote could be purchased separately

Pairing the Magic Remote
You can select the functions you want easily and conveniently by moving and clicking the cursor on the TV screen, just as you would use a mouse on a computer screen.

1. Turn on the TV. After about 20 seconds, point the remote toward the TV and then press the Wheel (OK).
2. The remote control will automatically be registered, and the pairing completion message is displayed on the TV screen.

• If the Magic Remote failed to register, turn the TV off and back on, and then try to register again.

RE-REGISTERING THE MAGIC REMOTE

If the Magic Remote’s pointer does not appear on the TV, you must re-register it.

1. Hold the remote control towards the TV and long-press GUIDE button until the instruction appears.
2. The previously registered remote control is deregistered and then registered again.

ASSEMBLY AND INSTALLATION

BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.

1. Stand assembly

a. Attach stands to base of TV, ensuring ‘A’ and ‘B’ markings on the TV and stands match.
b. Insert three stand screws for each stand and use Phillips head screwdriver (not supplied) to tighten.

2. Remote control assembly

a. Open the battery compartment cover on the back side.

b. Insert two 1.5V AAA size batteries, making sure to match the polarity markings (+ / -) of the batteries with the diagram inside the compartment.

c. Replace battery compartment cover.

3. Connecting peripheral equipment

Remark:

1. When you need to connect the device which support the ARC function, please select the HDMI-2 interface.
2. HDMI connector can realize DVI connector function with external HDMI/DVI commutator.
3. The peripheral equipment and cables described in this manual should be purchased separately.

4. Turning TV ON
Plug the power cord into a suitable power outlet, then press the POWER ( ) button on the remote control, making sure to aim it at the sensor at the front of the TV. Alternatively, you can press the power button on the lower side of the back panel on the TV.

TURNING TV OFF

Press the POWER ( ) button on the remote control to enter standby mode. To power down the TV completely, unplug the power cord from the power outlet.
Do not leave your set in standby mode for long periods of time. If you will not use the TV for a long time, it is recommended to unplug the set from both the power outlet and aerial.

HOME PAGE

1. Launch Search
To See The Details, Click The Enjoying Content Store -> Content Search In User Guide.

2. Move To The Home Dashboard
You Can Select Or Control A Device (Mobile, External Device, Home Iot Devices, Etc.)
Connected To The Tv. For More Information, See Connecting External Devices -> Using Home Dashboard In User Guide.

3. Move to the TV input you used recently

4. Move to the recently used app
Long-press the button on the remote control or focus on the recents. You can run or close a recently used app in the list provided in the preview area at the top.

5. Content Store

6. Apps
You can run, move, and delete the apps installed
on your TV. Focus on each App area. It provides the Preview at the top. You can check or run useful features of each app and recommended content on the Preview without entering into the app.

7. Web Browser

8. Picture

9. Music

10. Edit Apps
You can view a list of all apps installed on your TV, change their positions, or delete them.

11. Settings
Access the TV settings menu.

SETTINGS

Quick Settings
To Use Setting Function Quickly
Set of light-weight controls quickly and simply such as Picture Mode, Sound Out, Sleep Timer and so on.

Press the button on the remote control.

1. You can set Picture Mode.
2. You can set Sound Mode.
3. You can choose Sound Out.
4. You can set Sleep Timer.
5. Move to the Connection screen.
6. You can set more options.
7. You can add/delete the quick setting items or change their order.

After entering each item, press and hold the Wheel (OK) button on the remote control to go to the corresponding menu.

USING APPS

Using Content Store

You can download and use apps from various categories such as education, entertainment, lifestyle, news, and games.

1. Press the button on the remote control.
2. Launch Content Store.
3. Select All Apps category shown at the top of the screen. The list of available apps in the selected category will be shown.
4. Select an app to set up from the list.
5. Read the details of the app and then press Install.
6. When the installation is complete, you can run the app immediately.

BASIC TROUBLESHOOTING

References

• Tesla.info | Technology for all

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>