SQT Electronics SK-626BT Bluetooth Wireless Slim Keyboard Instruction Manual

SQT Electronics SK-626BT Bluetooth Wireless Slim Keyboard

Installing the Batteries

The Bluetooth Optical keyboard uses two AAA alkaline batteries. Install the batteries in the keyboard
Step1:
Remove the battery compartment cover on the bottom of the keyboard by squeezing the cover in from the tab to release it

Step2:
Insert the batteries as shown inside the battery compartment Step3:Replace the cover

Hotkeys on the keyboard

SK-621BT Multimedia Hotkeys Functions

System

Keys

| FN+E(IOS)| FN+Q(Android)| FN+W(Windows)
Esc| Main Page| Main Page| Esc
F1| Clip| Clip| F1
F2| Copy| Copy| F2
F3| Stick| Stick| F3
F4| Language shift| Language shift| F4
F5| Search| Search| F5
F6| Previous Track| Previous Track| F6
F7| Play/Pause| Play/Pause| F7
F8| Next Track| Next Track| F8
F9| Mute| Mute| F9
F10| Voume Down| Voume Down| F10
F11| Volume Up| Volume Up| F11
F12| Lock screen| Lock screen| F12

• Press FN+F1 into IOS(iPad,iPhone)operation system
• Press FN+F2 into Andriod(Damsumg Galaxy products)operation system
• Press FN+F3 into Windows operation system

Installing the Bluetooth Wireless Keyboard

Installing the Bluetooth Wireless Keyboard into your computer

1.  Before using the Bluetooth keyboard with your computer,You need to check whether your computer is equipped with Bluetooth receiver. If not, you will need to purchase an additional Bluetooth receiver and install it correctly onto your computer. once your computer is Bluetooth enabled, the setup applet’s icon will appear in the windows taskbar as shown below.
2.  Right-click on the Bluetooth icon in the Windows taskbar, and select Add a Bluetooth device”
3. Tick the checkbox “My device is setup and ready to be found”, and then click “Next”.
4. Your computer will now scan for Bluetooth devices in your area and display found devices. Meanwhile, press “FN+C” About 5 sec, then search the devices;
5.  Select the keyboard from the list of found devices and click “Next” to continue.
6. We recommend our customers to select “Next” to continue
7. The system will automatically finish the installation after clicking”Finish”in the below window

Installing the Bluetooth Wireless Keyboard into Your iPhone/iPad

You will need to manually sync your iPhone/ iPad with the Bluetooth keyboard before use. No further sync is needed if the first sync runs successfully. Please follow the instructions detailed below to complete the sync procedure. Follow the path Settings, General Bluetooth, on your iPhone/ iPad to enable the Bluetooth function on your iPhone/ iPad.

When Bluetooth is turned on, your iPhone/iPad will start searching for Bluetooth devices automatically. Switch on the Bluetooth keyboard by pressing the connect button underneath the keyboard,Your keyboard will be found by your iPhone/iPad automatically, When the keyboard is found,press the“Bluetooth Keyboard” appearing on the iPhone/iPad screen, a window will pop up with a syncing passkey, Type in the passkey shown given by the iPhone/iPad on the keyboard and then press the “enter” key ,Now the Bluetooth keyboard should be connected to your iPhone/iPad as shown in below picture’

Installing the Bluetooth Wireless Keyboard into Your iPhone/iPad

The procedure for connecting a keyboard SK626BT for Android devices Turn on the Bluetooth connection on your Android of installations,Press “FN+C” on your keyboard when searching for a Bluetooth device, For pairing, enter a numeric code that you receive on your Android device and press Enter

Other Considerations

1.  Power-saving design: When the keyboard does not take any action about 2 seconds into hibernation, press any KEY or touch screen wake
2.  Right-click on the Bluetooth icon in the Windows taskbar, and select Add a Bluetooth device”
3. Tick the checkbox “My device is setup and ready to be found”, and then click “Next”.
4. Your computer will now scan for Bluetooth devices in your area and display found devices. Meanwhile, press “FN+C” About 5 sec, then search the devices;
5.  Select the keyboard from the list of found devices and click “Next” to continue.
6. The system will automatically finish the installation after clicking “Finish”in the below window.
7. We recommend our customers to select “Next” to continue

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver
  is connected.

• Consult the dealer or an experienced radio/TV technician for helpThis this device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1.  this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>