SQT Electronics M6AG RF2.4GHz Optical Mouse Instruction Manual

SQT Electronics M6AG RF2.4GHz Optical Mouse

Product Information

Specifications

• Model: M6AG
• Technology: RF 2.4GHz Optical Mouse
• Power Source: Two AAA alkaline batteries

Product Usage Instructions

Installing Batteries in the Mouse

1. Open the battery compartment.
2. Insert two AAA alkaline batteries as shown inside the battery compartment.
3. Replace the cover.
4. Take out the receiver (shown in the picture) and connect it to the computer.

If you want to stop using the mouse:

2. Store the receiver onto the mouse (shown in the picture).

The receiver can be inserted into the USB port directly or by
using an extra USB cable.

Connecting the Mouse to Your Computer

Connect the USB plug of the nano receiver to the USB port of your computer.

Troubleshooting

If the wireless mouse doesn’t work, please check the following:

1. Ensure that the battery is not used out. If necessary, replace it with a new battery.
2. If the LED on the bottom of the mouse is off, follow these steps to recover the default setting (automatic pairing):
3. Unplug and plug again the nano receiver into an available USB port of the computer.
4. Make the wireless mouse close to the nano receiver (within 10 cm).
5. Take out the battery from the mouse and install it again inside the battery compartment.
6. If the LED on the bottom of the mouse turns on, you can start using the wireless mouse again.

FAQ

• Q: How do I connect the mouse to my computer?
• A: Connect the USB plug of the nano receiver to the USB port of your computer. Make sure the receiver is inserted properly.
• Q: How do I change the batteries?
• A: Follow these steps to install new batteries:

1. Open the battery compartment.
2. Insert two AAA alkaline batteries as shown inside the battery compartment.
3. Replace the cover.

Installing the Batteries

The RF2.4GHz Optical mouse uses two AAA alkaline batteries.
Installing Batteries in the Mouse

• Step 1. Open the battery compartment
• Step 2. Insert the batteries as shown inside the battery compartment
• Step 3. Replace the cover.

Connecting the Receiver

• The receiver is inserted into a USB port immediately or by a extra USB cable.
• Connect the USB plug to the USB port of your computer.

Connecting the Receiver

State of standby and wake up the mouse

• Without any clicks or scroll movement for & minutes, the mouse will go into standby mode. Click any button or scroll the wheel to wake up the mouse.
• Under this economised mode, the optical Red LED will turn off automatically and the mouse won’t respond by moving it.

Obtain the receiver on the mouse

1. If you want to use the mouse, pls take out the receiver (shown in picture 1) and connect it to the computer;
2. If you want to stop using the mouse, pls store the receiver onto the mouse (shown in picture 2);

Restoring factory default settings

Mouse
When the end user finds the wireless mouse doesn’t work, please check:

1. Whether the battery is used out, if yes, please replace it with a new battery;
2. If the LED on the mouse bottom is off, please do the following steps to recover the default setting (automatic pairing):

• Step one: unplug and plug again the nano receiver into an available USB port of a computer,
• Step two: make the wireless mouse close to the nano receiver (within 10 cm), take out the battery and install the battery again inside the Battery compartment, if we find the Led on the mouse bottom, we can start using the wireless mouse again.

Power-Save function

1. Without using the mouse for 1 minute, the mouse will go into sleep mode level 1. You can move it to wake up the mouse. The Red LED is still on.
2. Without using the mouse for 1-8 minutes, the mouse will go into sleep mode level 2. You can move it to wake up the mouse. The Red LED keeps flashing.
3. Without using the mouse for more than 8 minutes, the mouse will go into deep sleep mode. The LED turn off automatically.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

This device has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION: To use this device properly, please read the user’s guide before installation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>