Shenzhen Sqt Electronics SK-646AG Auto-Link Keyboard Instruction Manual
- June 5, 2024
- Shenzhen Sqt Electronics
Table of Contents
Sqt Electronics SK-646AG Auto-Link Keyboard
Instruction Manual
Model: SK-646AG
RF2.4GHz Auto-Link Keyboard
CAUTION: To use this device properly, please read the user’s guide before installation.
Install the batteries
The RF2.4GHz Optical keyboard uses two AAA alkaline batteries. Install the
batteries in the keyboard
Step1: Remove the battery compartment cover on the bottom of the keyboard
by squeezing the cover in from the tab to release it
Step2: Insert the batteries as shown inside the battery compartment
Step3 :Replace the cover
Connecting the Receiver
The receiver is inserted into a USB port immediately, or by an extra USB cable. Connect the USB plug to the USB port of your computer
Multimedia Hotkeys functions:
- FN+ESC=Media Player
- FN+F1=Play/Pause
- FN+F2=Previous Track
- FN+F3=Next Track
- FN+F4=Volume Up
- FN+F5=Volume Down
- FN+F6=Mute
- FN+F7=Web home
- FN+F8=Search
- FN+F9=M y Favorite
- FN+F10=Email
- FN+F11=Screen Lock
- FN+F12=My computer
Restoring factory default settings
when you find this wireless keyboard doesn’t work, you can make the keyboard in working condition by restoring back to factory default settings.
- check the battery volume is normal; if the battery is used out, please replace new batteries.
- insert the USB receiver onto the USB port of the PC or notebook 3. At the same time the battery into the keyboard, the keyboard LED lights flash quickly said, restore factory Settings successfully.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>