Shenzhen Sqt Electronics SK-058TM Wired Keyboard User Manual
- June 5, 2024
- Shenzhen Sqt Electronics
Table of Contents
Sqt Electronics SK-058TM Wired Keyboard
User Manual
SK-058TM Manual (3 Channel Bluetooth/2.4G/Wired Illuminated )
Basic Function
.1.1 3 Channel Bluetooth + 2.4G + Wired illuminated mechanical keyboard
1.11: Press FN+Prtscn (BT1)/Scrlk (BT2)/Pause(BT3) to 3 Bluetooth mode;
1.12:Plug nano receiver to the USB port and Press FN+PGUP to 2.4G mode
1.13:Plug USB cable and press FN+PGDN to wired mode;
1.14 If change to wired mode( Pls make sure the USB cable in the USB port),
press FN+PGDN, LED light under the PGDN button will flash slowly for around
3-5 sec., once connected, the LED will be off.
If a change to 2.4G mode( Pls make sure the nano receiver in the USB port),
press FN+PGUP, LED light under PGUP the button will flash slowly for around
3-5 sec., once connected, the LED will be off. If change to Bluetooth mode,
press FN+Prtscn (BT1)/Scrlk (BT2)/Pause(BT3), LED light under FN+Prtscn
(BT1)/Scrlk (BT2)/Pause(BT3) button will flash slowly for around 3-5 sec.,
once connected, the LED will be off.
1.15 Under Bluetooth Mode, when you press FN+Prtscn to BT1 (FN+SCRLK to BT2,
FN+Pause to BT3 ) around 3sec.Searching time up to 3 mins), the white LED will
flash quickly, then search Bluetooth device, which named: GEEZER BT, then
connected;
1.2:Under Bluetooth mode, Press FN+Q/W/E to change the Android /Windows/iOS
system;
FN+W (Default setting) (Windows) Press FN+F1.2.3… realize hotkey function)|
FN+E (iOS)| FN+Q (Android)
---|---|---
Fl
| Cut| Cut| Cut
F2| Copy| Copy| Copy
| Paste| Paste| Paste
F4 F5| Language Switch| Language Switch| Language Switch
Search| Search| Search
F6
| Previous Track| Previous Track| Previous Track
F7
| Play/Pause| Play/Pause| Play/Pause
F8
| Next Track| Next Track| Next Track
F9A’| Mutex| Mute| Mute
F10| Volume Down| Volume Down| Volume Down
---|---|---|---
F11| Volume Up| Volume Up| Volume Up
F12| Screen Lock (Black
Screen)| Screen Lock (Black
Screen)| Screen Lock (Black
Screen)
For code: FN + Pilsen Scrlk/Pause long press on the code (white light slow
flash), short press for channel switching.
1.3: On/OFF switch(Press to ON status under 2.4G or Bluetooth mode)
1.4. 2.4G nano receiver on Keyboard bottom case;
1.5: Compatible system under Bluetooth mode;
Windows on or above Windows 8.0 macOS on or above Mac iOS 10.10
Android – on or above Android 4.3
Compatible with Win XP/Vista/7/8/10 system underwired or 2.4G mode.
**1.6. LED Indicator
**
N: NUM LOCK NUM LOCK indicator (white LED), when charging, red LED is
lighting
C; CAPS LOCK CAPS LOCK indicator (White LED)
W ‘WIN LOCK Indicator
PRESS FN + to gaming mode indicato r with White LED , and function.key has no
any
2, Low battery indicator, White LED will flash slowly;
1.7 Keyboard size: 448.7214.536.1±0.2mm
1.8 Keyboard weight: 942±10g
2 Illumination Control:
- Supporting standard gaming backlight and custom backlight function Standard: FN+1 to FN+8: fixed gaming lighting UP, FN+9/FN+0: custom SETTING;
- Support a variety of super dazzling LED lighting effects Standard mode: totally 16 LED lighting modes;
In wired mode, 6-key and N-key modes are supported, and e-banking password entry is not affected Underwired mode when entering into sleep or standby status, the backlight will be off, and when the computer is started, the backlight will be ON. Under 2.4G or Bluetooth mode, when the keyboard standby for 1 min, the backlight will be off; and press any key, the backlight will be ON.
Illumination Control:
1 Press FN+ 3 sec. to clear lighting record, and recover to lighting mode;
- Backlit modes selection :
- Backlit brightness up: Backlit brightness down: is for backlit modes selection among the following 16 Illumination modes, modes 1: All keys backlit-On Mode(Default on)
Under this mode, press FN+ ****to 5 levels of brightness adjustment
modes 2 : The overall backlight of the keyboard simulates breathing
rhythm, and realizes the curve change of backlight brightness from off to
maximum. Brightness and respiration rate shall be subject to the previous
memory.
Under this mode, press FN+ ****to 5 levels of brightness adjustment
Under this mode, press FN+to change 4 levels of breathing speed;
modes 3: The default backlight is lightening. When the button is pressed, the backlight LED of the corresponding button is turned off. After the button is released,The backlight of the keys lights up for a delay.
Under this mode, press FN+ ****to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 4: The backlight of the keyboard moves from left to right, as if the water were sparkling.
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 5:The keyboard backlight brightness is spread around which is the center with the “P” word;
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 6: Keyboard backlight brightness layer flow is changed from left to right, like a wave constantly surging.
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 7: Keyboard backlight brightness gradually gathered from the center
to the left & right, like a wave constantly surging.
Under this mode, press FN+ ****to change 4 levels of breathing speed;
modes 8: The overall backlight is turned off. Each time press the button, two light waves are scattered to the surrounding waves centering on the button.
Under this mode, press FN+ ****to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 9: The backlight is off, and by default, each time a key is pressed, the line of keys lights up.
Under this mode, press FN+ ****to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 10:The default backlight is off. When the button is pressed, the corresponding button LED will be lighted. After releasing the button, the backlight will be off.
Under this mode, press FN+ ****to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 11: The default backlight is lightening. When you press the button, the LED will be off and spread to whole keyboard, after that the backlight will be ON again.
Under this mode, press FN+ ****to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 12: The backlight runs from ESC keys to whole keycaps one by one.
Under this mode, press FN+ ****to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 13: The backlight is blinking like star. The blinking speed and quantity can be adjusted by ender user.
Under this mode, press FN+ **** to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 14 : The backlight is running to and fro which is separated by two lines.
Under this mode, press FN+ **to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
Modes 15:** The backlight runs from the upper left to the right corner to
the whole keyboard and runs again from the upper right to the left corner to
the whole keyboard.
Under this mode, press FN+ **to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
Modes 16:** The keyboard background is LED off, a colorful light wave is
flying up.
Under this mode, press FN+ **** to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
Game mode and key custom Settings
Game mode1(FPS): FN+ 1= A S D W ESC light,
Game mode2(CF): FN+2 = ASDW Ctrl Shift Alt Space RGQEB 1-5 Tab F1-F3 PGUP PGDN
Home End PrtSc Scroll lock light,
Game mode3(COD): FN+3 =QWERTASDFGCV 1-7 Ctrl Shift light
Game mode4(RTS): FN+4 =QWERTYUPASDFGHKLZXNM Space 1-8,9-0 Ctrl Shift
Alt light,
Game mode5(LOL): FN+ 5= QWERDFGVB Ctrl Alt Tab Space ~ 1-6 Esc light
Game mode6(Car Race): FN+ 6=WRASD Ctrl Shift Alt light
Game mod7(NBA): FN+ 7=WERASFZXCV Ctrl Shift Alt Space 1234 light
Game mode8(LOL): FN+ 8=QWERDFB 1-6 light Game mode9(self design):
FN+ 9= Custom lighting Game mode10(self design): FN+ = Custom lighting
Light custom Settings:
= Record/Save
Press FN 9+ or FN + 0 into the corresponding custom mode. Press status to
enter the custom recording to save.
Press any key to turn on or turn off to the specified state, and press Press
FN +ESC clear light recording, restore lightening mode.
FCC Warning
Statement Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.