SQT Electronics SK-053TM BT Three-Mode Mechanical Keyboard Instruction Manual
- June 5, 2024
- SQT Electronics
Table of Contents
SK-053TM Manual：
(BT three-mode mechanical keyboard)
Basic Function
1.1 3 Channel bluetooth + 2.4G + Wired illuminated mechanical keyboard
1.11: Press FN+PGDN (BT1)/END (BT2) to 2 Bluetooth mode;
1.12:Plug nano receiver to USB port and Press FN+PGUP to 2.4G mode
1.13:Plug USB cable and press FN+HOME to wired mode;
1.14： If change to wired mode( Pls make sure USB cable in USB port), press
FN+HOME, LED light under
HOME button will flash slowly around 3-5 sec., once connected, LED will be
off.
If change to 2.4G mode( Pls make sure nano receiver in USB port), press
FN+PGUP, LED light under PGUP button will flash slowly around 3-5 sec., once
connected, LED will be off.
If change to bluetooth mode, press FN+PGDN(BT1)/END(BT2),LED light under
FN+PGDN (BT1)/END(BT2),button will flash slowly around 3-5 sec., once
connected, LED will be off.
1.15： Under Bluetooth Mode, when you press FN+PGDN to BT1 (FN+END to BT2, )
around 3sec.（Searching time up to 3 mins), the white LED will flash quickly,
then search bluetooth device, which named: K840T Keyboard BT, then connected;
Under Bluetooth mode, Press FN+Q/W/E to change Android /Windows/iOS system;
FN+W (Default setting)
(Windows)
Press FN+F1.2.3… realize hotkey
function)| FN+E
（iOS)| FN+Q
(Android)
---|---|---
F1
| Cut| Cut| Cut
F2
| Copy| Copy| Copy
F3
| Paste| Paste| Paste
F4
| Lauguage Switch| Lauguage Switch| Lauguage Switch
F5
| Search| Search| Search
F6
| Previous Track| Previous Track| Previous Track
F7
| Play/Pause| Play/Pause| Play/Pause
F8
| Next Track| Next Track| Next Track
F9
| Mute| Mute| Mute
F10
| Volume Down| Volume Down| Volume Down
F11
| Volume Up| Volume Up| Volume Up
F12
| Screen Lock (Black
Screen)| Screen Lock (Black Screen)| Screen Lock (Black
Screen)
For code: FN + Prtscn Scrlk/Pause long press on the code (white light slow flash), short press for channel switching.
1.3: On/OFF switch(Press to ON status under 2.4G or Bluetooth mode)
1.4. 2.4G nano receiver on Keyboard bottom case;
Compatible system under bluetooth mode;
Windows –on or above Windows 8.0
MacOS –on or above Mac iOS 10.10
Android – on or above Android 4.3
Compatible with Win XP/Vista/7/8/10 system under wired or 2.4G mode.
LED Indicator
: CAPS LOCK CAPS LOCK indicator (White LED)
WIN LOCK Indicator
PRESS FN+ to gaming mode： indicator with White LED, and key has no any function.
2, Low battery indicator, White LED will flash slowly;
1.7 Keyboard size: 351.6134.636.8±0.2mm
1.8 Keyboard weight:725±10g
Illumination Control:
- Supporting standard gaming backlight and custom backlight function Standard: FN+1 to FN+8: fixed gaming lighting UP, FN+9/FN+0: custom SETTING;
- Support a variety of super dazzling LED lighting effects Standard mode: totally 16 LED lighting mode;
In wired mode, 6-key and N-key modes are supported, and e-banking password entry is not affected
Underwired mode, when enter into sleep or standby status, backlight will be off, when computer is started, backlight will be ON.
Under 2.4G or Bluetooth mode, when keyboard standby 1 min, backlight will be off; and press any key, backlight will be ON.
Illumination Control:
- Press FN+SPACE 3 sec. to clear lighting record, and recover to lighting mode;
- FN+PRTES: Backlit modes selection:
- Backlit brightness up: Backlit brightness down:
FN+PRTES is for backlit modes selection among the following 16 Illumination
modes, modes 1: All keys backlit-On Mode(Default on)
Under this mode, press FN+ to 5 levels of brightness adjustment
modes 2: The overall backlight of the keyboard simulates breathing rhythm, and
realize the curve change of backlight brightness from off to
maximum.Brightness and respiration rate shall be subject to the pervious
memory.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 3: The default backlight is lightening. When the button is pressed, the backlight LED of the corresponding button is turned off. After the button is released,The backlight of the keys lights up for a delay.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 4:The backlight of the keyboard moves from left to right, as if the water were sparkling.
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 5:The keyboard backlight brightness is spread around which is the center
with “P” word;
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 6: Keyboard backlight brightness layer flow is changed from left to
right, like a wave constantly surging.
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 7: Keyboard backlight brightness gradually gathered from the center to
the left & right , like a wave constantly surging.
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 8: The overall backlight is turned off. Each time press the button, two light waves are scattered to the surrounding waves centering on the button.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 9: The backlight is off, and by default, each time a key is pressed, the line of keys lights up.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 10:The default backlight is off. When the button is pressed, the corresponding button of LED will be lighted. After releasing the button, the backlight will be off.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 11: The default backlight is lightening. When you press the button, the LED will be off and spread to whole keyboard, after that the backlight will be ON again.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 12: The backlight runs from ESC keys to whole keycaps one by one.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 13: The backlight is blinking like star. The blinking speed and quantity can be adjusted by ender user.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 14: The backlight is running to and fro which is separated by two lines.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 15:The backlight runs from upper left to right corner to whole keyboard,
and runs again from upper right to left corner to whote keyboard.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
modes 16: The keyboard background is LED off, a colorful light wave is flying
up.
Under this mode, press FN+ to 5 levels of brightness adjustment
Under this mode, press FN+ to change 4 levels of breathing speed;
Game mode and key custom Settings
Game mode1(FPS): FN+ 1= A S D W ↑↓←→ ESC light,
Game mode2(CF): FN+2 = ASDW Ctrl Shift Alt Space RGQEB 1-5 Tab F1-F3 PGUP PGDN
Home End PrtSc Scroll lock light,
Game mode3(COD): FN+3 =QWERTASDFGCV 1-7 Ctrl Shift light
Game mode4(RTS): FN+4 =QWERTYUPASDFGHKLZXNM Space 1-8,9-0 Ctrl Shift Alt
light,
Game mode5(LOL): FN+ 5= QWERDFGVB Ctrl Alt Tab Space ~ 1-6 Esc light
Game mode6(Car Race): FN+ 6=WRASD ↑↓←→ Ctrl Shift Alt light
Game mod7(NBA): FN+ 7=WERASFZXCV Ctrl Shift Alt Space ↑↓←→ 1234 light
Game mode8(LOL): FN+ 8=QWERDFB 1-6 light
Game mode9(self design): FN+ 9= Custom lighting
Game mode10(self design): FN+ = Custom lighting
Light custom Settings:
FN+INSERT = Record / FN+Delete = Save
Press FN 9+ or FN + 0 into corresponding custom mode. Press FN+INSERT to enter
the custom recording status.
Press any key to turn on or turn off to the specified state, and press
FN+Delete to save.
Press FN +ESC clear light recording, restore lightening mode.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>