SQT Electronics SMK-676683M6AG RF 2.4GHz Auto Link Two Keyboard and Optical Mouse Instruction Manual
- October 30, 2023
- SQT Electronics
Table of Contents
- SQT Electronics SMK-676683M6AG RF 2.4GHz Auto Link Two Keyboard and
- Installing the Batteries
- Installing Batteries in the Mouse
- Install the batteries in the keyboard
- Install the batteries in the keyboard
- Connectin the Receiver
- Abtain the receiver on the mouse
- Dpi shift function
- State of standby and wake up the mouse
- FN+ functions:
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SQT Electronics SMK-676683M6AG RF 2.4GHz Auto Link Two Keyboard and
Optical Mouse Instruction Manual
Installing the Batteries
The RF2.4GHz Optical mouse use two A AA alkaline batteries.
The RF2.4GHz Optical keyboard use two AAA alkaline battery
The RF2.4GHz Optical keyboard use one AAA alkaline battery.
Installing Batteries in the Mouse
Step 1. Open the battery compartment
Step 2.Insert the batteries as shown inside the battery compartment
Step 3.Replace the cover
Install the batteries in the keyboard
Step1: Remove the battery compartment cover on the bottom of the keyboard by
squeezing the cover in from the tab to release it
Step2:Insert the batteries as shown inside the battery compartment
Step3:Replace the cover
Install the batteries in the keyboard
Step1: Remove the battery compartment cover on the bottom of the keyboard by
squeezing the cover in from the tab to release it
Step2:Insert the batteries as shown inside the battery compartment
Step3:Replace the cover
Connectin the Receiver
The receiver is insert to USB port immediate, or by a extra USB cable.
Connect the USB plug to USB port of your computer
Abtain the receiver on the mouse
- when you want use the mouse ,you can take out the receiver to computer by the list step;
- when you need stop the work or to travel, you can store the receiver on the mouse for the moving by the list step
Dpi shift function
Your optical 3D mouse is provide 1200 dpi .
State of standby and wake up the mouse
Without any clicks or scroll movement for 8 minutes, the mouse will go into
standby mode. Click any button or scroll the wheel to wake up the mouse.
Under this economize mode, the optical Red LED will turn of automatically and
the mouse won’t respond by moving it.
FN+ functions:
FN+ESC= FN+ SHIFT+ ESC=~
SHIFT+1=! FN+1=F1
SHIFT+2=@ FN+2=F2
SHIFT+3=# FN+3=F3
SHIFT+4=$ FN+4=F4
SHIFT+5=% FN+5=F5
SHIFT+6=^ FN+6=F6
SHIFT+7=& FN+7=F7
SHIFT+8=* FN+8=F8
SHIFT+9=( FN+9=F9
SHIFT+0=) FN+0=F10
SHIFT+- = _ FN+-=F11
SHIFT+= =+ FN+==F12
FN+Backspce=A Line function to flip the top