TORO 79501 Twin Bagger 54 Inch Zero Turn Radius Riding Mower Instruction Manual
- June 1, 2024
- Toro
Table of Contents
TORO 79501 Twin Bagger 54 Inch Zero Turn Radius Riding Mower
Specifications:
- Product: Twin Bagger
- Compatible with: 50in or 54in Zero-Turn-Radius Riding Mower
- Model No.: 79501–Serial No. 400000000 and Up
**Product Information
**
The Twin Bagger is designed for use with 50in or 54in Zero-Turn-Radius Riding Mowers. It consists of multiple components that work together to efficiently collect grass clippings and debris during mowing.
Assembly Instructions:
- Refer to the provided list of parts and their quantities for the Twin Bagger assembly.
- Follow the step-by-step instructions for assembling the Twin Bagger components in the correct order.
- Ensure all parts are securely attached and tightened to prevent any dislodging during use.
Installation Guide:
- Attach the Mount-Bagger and Frame-Bagger to the mower according to the mounting instructions.
- Secure the Bag ASM to the Frame-Bagger using the provided hardware.
- Install the Guard-Muffler, Rod-Bagger Support, Clevis, Pin-Clevis, and other components as per the assembly diagram.
Maintenance:
Regularly inspect the Twin Bagger for any loose parts or damage. Clean out any
debris collected in the bags after each use to maintain optimal performance.
Usage Tips:
- Operate the mower at a steady speed for efficient grass collection.
- Avoid mowing wet grass to prevent clogging of the Twin Bagger.
- Empty the bags when they are full to prevent overloading and ensure continued operation.
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference
number for a part also appears in the parts list, along with other information
about the part.
This catalogue uses two special reference number formats, one to indicate
parts in a service assembly and another to indicate the quantity of a given
part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The a
represents the reference number of the entire service assembly and the b
represents a sequential number unique to each part within the service
assembly. For example, a wheel assembly might be identified by reference
number 6, the tyre by 6:1, the valve by 6:2, and the wheel by 6:3. When you
order the assembly identified by reference number 6, you receive all parts
identified by reference number 6:1,6:2, and 6:3. However, you may also order
any part individually. Reference numbers of this type appear in illustrations
and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the
reference number has the form nX y. The n represents the quantity of the part,
the X is the multiplication symbol, and the y represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of
the parts identified by reference number 37 are indicated.
Twin Bag Assembly
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
1| 147-8803-03| 1| Mount-Bagger [black]| | 12| 117-5379| 1| Tube-Bagger
2| 147-8820-03| 1| Frame-Bagger [black]| | 13| 139-2611| 2| Washer-Flat
3| 147-7716-03| 1| Guard-Muffler [black]| | 14| 139-2562| 4| Pin-Hair
4| 161-4479| 2| Rod-Bagger Support| | 15| 116-4992| 1| Latch-Rubber
5| 100-7338| 2| Clevis| | 16| 137-3073| 2| Washer-Plain
6| 283-68| 2| Pin-Clevis| | 17| 132-6919| 2| Screw-Plastic, PTH
7| 161-6239| 2| Bag ASM| | 18| 110-3144| 4| Bolt-CARR
8| 147-8819| 1| Rod-Hold Down| | 19| 119-4041| 10| Nut-HF
9| 140-5016| 2| Bracket-Hopper Pivot| | 20| 139-2596| 6| Screw-HHF
10| 140-5096| 1| Top ASM-Bagger| | 21| 92-2739| 1| Pin-Clevis
11| 112-3993| 1| Screen-Bagger| | 22| 147-8831-03| 1| Plate-Bagger Stabilizer
Bag and Frame Assembly
Ref.
1
| Part Number
114972-03
| Qty.
1
| Description
Frame-Bag
| | Ref
4
| Part Number
139-2630
| Qty.
2
| Description
Bolt-CARR
---|---|---|---|---|---|---|---|---
2| 114973-03| 1| Hanger-Bag| | 5| 119-4038| 2| Nut-Hex
3| 114974-03| 1| Clamp| | 6| 140-5192| 1| Bag ASM 20In Depth
Bagger Top Assembly No. 140-5096
Ref.
2
| Part Number
116-1242-03
| Qty. Description
1 Stiffener-Bagger Top
| | | Ref.
6
Part Number
137-3073
| Qty.
4
| Description
Washer-Plain
3| 112-4001| 1 Gasket| | 7| 109-6809| 1| Decal-Caution, Bagger
4| 112-4000-03| 1 Ring-Retainer| | 8| 133-8061| 1| Decal-Warning
5| 114439| 12 Rivet-Blind| | | | |
Weight Assembly
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
1| 147-7581-03| 1| Bracket-Weight Tc [black]| | 5| 147-7582-03| 4| Weight-
Bagger
2| 147-7583-03| 1| Bracket-Weight Tc [black]| | 6| 139-2597| 4| Screw-HHF
3| 140-5097| 2| Screw-Spcl| | 7| 119-4042| 6| Nut-HF, NI
4| 87-5330| 2| Washer| | 8| 32144-70| 2| Screw-HWHTF
Chute Assembly
Ref. Part Number Qty. Description
1 139-3259 1 50/54 Boot Assembly
2 140-3502-03 1 Baffle-Cutoff
Chute Assembly No. 139-3259
Ref.| Part Number| Qty.| Description| |
Ref.| Part Number| Qty.| Description
---|---|---|---|---|---|---|---|---
1| 140-3465| 1| 50/54 Fab Bagger Boot| | 8| 138-7571| 1| Plate-Latch
1:2| 110-6691| 1| Decal-Danger| | 9| 139-1730| 1| Screw-Shoulder, HHF
2| 138-7572| 1| Hook-Boot| | 10| 139-1723| 1| Washer-Flat
3| 140-5094| 1| Plate-Pivot, Cz| | 11| 139-1716| 1| Screw-HH
4| 117344| 1| Handle ASM| | 12| 82-5690| 1| Retainer-Duct
6| 3274-69| 4| Screw-HSBH| | 13| 114-9015| 1| Nut-Impeller
7| 137-3088| 5| Nut-Hex| | 14| 3269-31| 2| Rivet-Pop
FAQ
Q: How do I order replacement parts for the Twin Bagger?
A: To order replacement parts, please provide the part number, quantity,
and description of each part desired. Reference the parts list for accurate
identification.
Q: How often should I clean the Twin Bagger?
A: It is recommended to clean out any debris collected in the bags after
each use to maintain optimal performance and prevent blockages.