Drager RC003 Gas Measurement Device Instruction Manual

June 5, 2024
Drager

Drager-RC003-Gas-Measurement-Device-LOGO

Drager RC003 Gas Measurement Device

Device marking

Drager-RC003-Gas-Measurement-
Device-1Drager-RC003-Gas-Measurement-
Device-2Drager-RC003-Gas-Measurement-
Device-3Drager-RC003-Gas-Measurement-
Device-4

Serial Number key

The third letter of the serial number specifies the manufacturing year: M = 2019, N = 2020, P = 2021, R = 2022, S = 2023, T = 2024, U = 2025, W = 2026, X = 2027, Y = 2028, Z = 2029, etc. (Letters G, I, O, Q are omitted)
Example: Serial Number ARMB-0001: the third letter is M, which means that the unit was manufactured in 2019.

Radio

  • Max. radiated power:
  • Bluetooth® LE: <20 dBm EIRP
  • ISA100: <20 dBm EIRP
  • Operating frequency:
  • Bluetooth® LE: 2402-2480 MHz
  • ISA100: 2405-2480 MHz

EU-Declaration of Conformity

USA

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  This device may not cause harmful interference, and
  2.  this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Canada

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1.  This device may not cause interference.
  2.  This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Drager User Manuals

Related Manuals