Loyoele QG Solar Street Light User Guide
- June 14, 2024
- Loyoele
Table of Contents
QG Solar Street Light
User Guide
QG Solar Street Light
Thanks so much for choosing our solar street light. For any further questions, please email us.
Package Include
Components | 1 Pack | 2 Pack | Images |
---|---|---|---|
Solar Street Light | 1PC | 2PCS | |
Mounting Bracket | 1PC | 2PCS | |
Back Panel for Pole Mount | 1PC | 2PCS | |
Wall Mount Bolts | 4sets | 8sets | |
Long Bolts | 4sets | 8sets | |
Long Screws | 4sets | 8sets | |
Remote Control | 1PC | 2PCS | |
Open Spanner | 1PC | 2PCS | |
Instruction Manual | 1PC | 2PCS | |
AAA Batttary | 2PC | 4PCS |
Installation
- Recommended Installation Height:
The advice diameter of the pole is between 1.5-4IN 13-20Ft
PLEASE PRESS THE
( ) ” BUTTON ON THE LIGHT FIRST BEFORE USING
On the wall
Step 1: Drill 4 holes in the wall according to the position of the
bracket’s ‘hole.
Step 2: Fix the light body on the mounting bracket and then tighten the screw.
Step 3: Put the mounting bracket in the right position and knock the wall
mount bolts into the wall, and tighten the screws. On the pole
Step 1: Fix the mounting bracket to the pole with the long bolts, and then
tighten the screws.
Step 2: Fix the light body on the mounting bracket and then tighten the
screws. Remote
Control Buttons
Please insert the 2 batteries ((1.5 V AAA type). Make sure that the
positive and negative ends are facing in the correct direction. the control
distance of remote is 35ft.
- When you press the button ON, the solar street light will be 100% brightness.
- When you press the button OFF, the solar street light will be turned off and cannot be turned on automatically until the next day. {Tips: You need to press ( )on the light body to turn off the solar street light completely.)
- Motion Sensor Mode: It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
- Timed Lighting: Timed 100% brightness Lighting 2/3/5/6/8 hours without radar sense motion function.
- Brightness level: you can set up the brightness level ( 25% / 50%/ 75%/100%) of the light.
Motion Sensor Mode
Warm Tips
- please check the contents and test the product when you receive the package. (the solar street light won’t be turned on if the charging panel detects the light source)
- Install the solar street light in the best position of sunshine. Make sure to be far away from trees, buildings, or other shadows. Or the internal battery will not charge properly and the efficiency will of the solar panel be minimized, influencing the working time of the unit and battery.
- The charging efficiency of the solar panel depends on the weather conditions, the stronger the sunlight, the shorter the charging time, and the lighting time may be shortened in the case of long-term cloudy days (rainy days), which is a normal phenomenon.
- Make sure the solar street light is stable and the switch is turned on after completing the installation.
please charge for 6-8 hours before using the solar street for the first time. The solar panel will be covered with dust when used outdoors for a long time. Please clean up regularly!
Warranty
We provide our customers with a warranty of 12 months from the date of
purchase.
For any further questions about your solar street light, please send an email
(the Amazon order number included)to and we will respond to you within 24
hours. Thanks so much for your supporting!
Email:bddmgo@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>