Drager X6O-IC002 X-Dock Maintenance Station Instructions

: June 9, 2024
: Drager

Table of Contents

Drager X6O-IC002 X-Dock Maintenance Station
Specifications
Operation
Maintenance
FAQ
FCC STATMENT
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Drager X6O-IC002 X-Dock Maintenance Station

Specifications

Model : X-dock
Versions : 5300, 6300, 6600, Module Pac, Module X-am 125, Module X-am 125+, Module X-am 8000, Module X-am 8000+
Compliance: CAN ICES-3 (B)/NMB-3(B), IC: 5855F-IC002, FCC Part 15
Operating Conditions: License-exempt transmitter(s)/receiver(s)

Setup

Ensure the device is placed on a stable surface.
Connect the power adapter to the device and plug it into a power outlet.
Follow the specific setup instructions provided in the user manual for individual modules.

Operation

Turn on the device using the power button.
Access the menu options to select the desired module for testing.
Follow the on-screen prompts to perform the required tests.

Maintenance

Regularly clean the device with a soft, dry cloth to prevent dust buildup.
Keep the device away from water or moisture to avoid damage.
Refer to the user manual for specific maintenance tasks for each module.

FAQ

Q: How often should I calibrate the modules?
A: Calibration frequency may vary based on usage and environmental conditions. It is recommended to calibrate the modules at least once every six months for optimal performance.
Q: Can I use the device in other countries?
A: The device is designed for specific regulatory standards in Canada and the USA. Ensure compliance with local regulations before using the device in other countries

FCC STATMENT

Only for Canada

X-dock Module X-am 8000+
CAN ICES-3 (B)/NMB-3(B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Only for the USA

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Only for the USA:
FCC ID: X6O-IC002
IC002
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from the person’s body.

FCC responsible party