Snatcher K-1106 Flying Saucer Projection Light User Manual

Flying Saucer
Projector Lamp

Flying Saucer Projector Lamp
(User Manuel)

Product description:

Thank you for purchasing our company’s product.
This product is an intelligent starry sky projection lamp, and we hope that it will bring you a romantic and warm product experience during use.
Please read this manual carefully and keep it properly before using the product for future reference .

Product parameter:

Precautions：

1. Please ensure that the product avoids contact with water and corrosive liquids;
2. If you need to clean the product, please make sure to disconnect the power supply;
3. For better and smoother use, please use a 5V/2A adapter.

Main unit button functions：

Instructions for use

1. Power button: Short press to turn on, after turning on, the motor rotates at high speed for1.5 seconds before entering the first gear speed. The RGBW light is default in blue aurora effect state, the two special lights are on, and the effect light1 is breathing with a breathing time from the darkest to the brightest for10s and from the brightest to the darkest for10s. Effect light2 is always on. Short press again to turn off. Long press in power-on state to switch RGBW light effect state (aurora effect, vortex effect).

2. RGBW light button: Click once on the RGBW light button to adjust the light color combination. The color order is blue, red, green, white, blue-red, blue-white, blue-green, red-green, red-white, green-white, blue-red-green, blue-green-white, blue-red-green-white, color gradient. After adjusting the14 light colors, click the button to turn off the light, and then click again to return to the first light color.
   Long press the light button to adjust the light brightness. There are a total of7 levels of brightness, and each brightness pauses for1s when adjusting the light.

3. Special effect light button: Click the special effect light button to turn on the two special lights (default on after starting), effect light1 opens with a breathing light mode. Effect light2 is always on. Click the special effect light button again to turn on only effect light1, click again to turn on only effect light2, and then press again to turn off the two special light functions. Press again to turn on both, repeat the operation to reactivate both special lights.

4. Music button: Click to open the built-in music, click to switch to the next song. There are five built-in music. When you switch to the last song, click again to close the music. (Long press to adjust the volume.)

5. Automatic timing function: In order to better use the product, the product will automatically shut down after4 hours of operation.
   If there is a timing operation during use, the product will switch to timing shutdown mode.

Remote control function panel

Remote control function description:

1. Power on/off button: press briefly to turn on, and press again to turn off, repeat operation;

2. RGBW light effect switch button: default aurora effect after power on, press once to switch to vortex effect, press again to switch to aurora effect, repeat operation;

3. ® RGBW light fade button (Fade): press once to turn on the RGBW light fade mode, the color will automatically switch, press again to turn off the RGBW light fade mode;

4. RGBW light color switch button: press once to adjust the combination of RGBW light colors, the order of light colors is blue, red, green, white, blue and red, blue and white, blue and green, red and green, red and white, green and white, blue, red and green, blue and green and white, blue, red and white and green, press again to turn off the RGBW light, then press again to turn on the blue light.
   Repeat operation;

5. RGBW light brightness up button: adjust the brightness of RGBW light;

6. RGBW light brightness down button: adjust the brightness of RGBW light;

7. Previous music button: click to play the previous song;
   Music button: press once to play the built-in music, press again to stop the built-in music;

8. Next song button: click to play the next song;

9. Special effect light button: press L+G to activate the two special effect lights, press L to activate only special effect light1, Press G to activate only special effect light2;

10. Rotation speed button: turn the button to adjust the rotation speed of the motor and turn it off, press once to turn on, press again to turn off, repeat operation; before opening each rotation speed, it rotates quickly for1.5s.

11. Timing key: set the automatic shutdown timing function of the product, you can set the duration of half an hour, one hour, and one and a half hours;

12. Timing off button: cancel the timing function.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>